Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

It is Here.!!!!! 300mW "635nm" Mitsubishi.....






Divergence/Beam diameter make a lot of difference when it comes to the beam brightness. The tool don´t consider this. That´s my point.
 
Eudaimonium said:
Infinitus - Nope, I don't even have a real LPM, I just have a DIY instrument, I have a 445nm at 1.15 A through Aixiz glass lens, and it measures 1W flat, while that would actually be more like 800mW, so with 20% off while it measures my red at near 600mW, I'd say it's somewhere right about half watt.

I have not observed any ill effects from running the laser for a bit lonber periods of time. Heat can be felt nicely through the host after 15-20 seconds of operation.
Click to expand...

Awesome... can't wait to get one of these and abuse it. Going to be a while until my host gets here though.

Wish they would row faster on that slow boat:p
 
My diodes just showed up this afternoon. I should have a build up and running in a couple days (waiting on some new drivers).
 
Yep, RHD should ad an optional beam diameter parameter to compare the brightness more accurately. But what is the equation that should be used here? Something like "50% wider beam is 50% brigher"? We need to do some research on this.
 
Johnyz said:
Yep, RHD should ad an optional beam diameter parameter to compare the brightness more accurately. But what is the equation that should be used here? Something like "50% wider beam is 50% brigher"? We need to do some research on this.
Click to expand...

Happy to do that if someone can devise some solid math to back up the specifics.

Apart from the 650-G lenses (of which I have one on order) what's the current consensus as to the best lens for these?

- Acrylic
- Acrylic Coated
- Aixiz Glass Uncoated
- Aixiz Glass Red Coated (are these still around?)
- Aixiz Glass 405/445 Coated

?
 
rhd said:
Happy to do that if someone can devise some solid math to back up the specifics.

Apart from the 650-G lenses (of which I have one on order) what's the current consensus as to the best lens for these?

- Acrylic
- Acrylic Coated
- Aixiz Glass Uncoated
- Aixiz Glass Red Coated (are these still around?)
- Aixiz Glass 405/445 Coated

?
Click to expand...

and the O-like lens. Also I would like to know what the specs would be with an optima lens.
 
rhd said:
Happy to do that if someone can devise some solid math to back up the specifics.

Apart from the 650-G lenses (of which I have one on order) what's the current consensus as to the best lens for these?

- Acrylic
- Acrylic Coated
- Aixiz Glass Uncoated
- Aixiz Glass Red Coated (are these still around?)
- Aixiz Glass 405/445 Coated

?
Click to expand...

I tried with a Aixiz glass 405/445 and it was terrible... Didn't even reach 300mW at 700mA. Uncoated acrylic got me around 370mW at 700mA. I'm planning to get Aixiz glass coated for red.
 
Last edited:
Isn't the o-like lens the same as the aixiz glass?

The Optima lens would make divergence even worse. We want to expand the beam, not shrink it.
 
Johnyz said:
I tried with a Aixiz glass 405/445 and it was terrible... Didn't even reach 300mW at 700mA. Uncoated acrylic got me around 370mW at 700mA. I'm planning to get Aixiz glass coated for red.
Click to expand...

You actually tried it? Why would you even try using a lens coated for wavelengths on the other end of the visible spectrum?
 
You must log in or register to reply here.





Back
Top