jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
Re: 445nm "sled" pics
445nm build with EzFocus adapter and an AixiZ 405 glass lens:
If your planning on using an AixiZ 405 glass lens with an EzFocus adapter, then my recommendation is to pay the extra $10 option for me to use a little longer heatsink and drill out the top of the pill!
That way the driver can be mounted inside of the pill instead of on top of the pill...
And I will also make the heatsink a little longer as well.
Then there would be room to slide the module into the heatsink farther to adjust the current EzFocus design to fit just fine if your using the AixiZ 405 glass lens! (which sticks out farther than other lenses)
But you must make sure your AixiZ 405 lens has the full length threads so that you can thread the EzFocus adapter onto the lens...
445nm build with EzFocus adapter and an AixiZ 405 glass lens:
If your planning on using an AixiZ 405 glass lens with an EzFocus adapter, then my recommendation is to pay the extra $10 option for me to use a little longer heatsink and drill out the top of the pill!
That way the driver can be mounted inside of the pill instead of on top of the pill...
And I will also make the heatsink a little longer as well.
Then there would be room to slide the module into the heatsink farther to adjust the current EzFocus design to fit just fine if your using the AixiZ 405 glass lens! (which sticks out farther than other lenses)
But you must make sure your AixiZ 405 lens has the full length threads so that you can thread the EzFocus adapter onto the lens...
Last edited: