This is a great little EzFocus adapter for you Kryton lovers!

It is designed primarily for Kryton owners who have also upgraded to my 405-G-1 glass lens modification, or my 650-G-1 glass lens fit for AixiZ mod... (but works just the same with AixiZ acrylic)

As you know, the design of the Kryton, awesome as it is, makes it difficult to focus. It is designed for more of a 'fixed focus' laser that can be adjusted, but your fingers get in the way for focusing.

(P.S. I have spoken to Kenom about this modification and he is fine with me selling it)







With the availability of my glass lens modifications, the increase in power will make it very uncomfortable to say the least when trying to focus your Kryton! You will burn your fingers with these lenses!

The installation is simple, you just push your lens with focus ring into the o-ring fitted adapter!

My Kryton EzFocus Adapter will work well for AixiZ acrylic as well! In this case, you just don't push the AixiZ focus ring completely 'flush'. (as shown in the picture)

Very nice control for easy fine adjustment!

I am offering them sized for the 1st run smooth Kryton's, as well as the Kryton Groove barrels.

$19 dollars plus $3 dollars shipping. For the knurled option, add $5 dollars...
Jay





A similar EzFocus adapter is also available for my Pocket Mini!




I will be selling these as an option to get with my Pocket Mini Kits, or separately!

Note: Designed for use with my 405-G-1 glass lens modification, or my 650-G-1 glass 'fit for AixiZ' lens mod.

You can set the module in the desired position. I will offer them knurled, as the pictures show.

These will be $20 dollars plus shipping...

Same price for my Micro Chrome EzFocus adapter...





Key Chain CR2 EzFocus adapter is also available for my new Key Chain CR2 Build Kit!



$20 dollars...

Here's the kit:
http://laserpointerforums.com/f39/fs...eet-42773.html





18650 kit EzFocus Adapter!








Star Trek Phaser EzFocus Adapter! (priced differently due to the extra work - see link here)








Stainless Steel 10440 EzFocus Adapter!







Stainless Steel C3 EzFocus Adapter!







Micro Chrome EzFocus Adapter!











* FS: 650-G-1 glass lens mod for red! (fit for AixiZ) - $52 20% increase for red vs AixiZ acrylic! (back opened) See here: http://laserpointerforums.com/f64/fs...ase-46332.html

don't you make the kryton's????

The Kryton is Kenom's design...

I messaged him about my EzFocus adapter. 8-)

I don't know if he will be doing another Kryton run or not. But lets hope so, because they are an awesome design!
Jay

Why the heck didn't I think of that. I liked the look of the kryton but figuring out an easy way to access the focus was driving me nuts. Finally had a machinist friend remove the top portion (don't let kenom see this picture). *:-X


Great mod though I'd want one myself if not for my own mod. Work that precise is hard to come by.

Thanks for the compliment!

You came up with your own answer... 'Necessity is the mother of invention'!
Jay

God lol, you're starting to sound like my physics teacher. That's one of his favorite quotes, and he say's it ALL the time

Very awesome mod there bud. I'm not concerned about any toes. It's a great solution for a issue that lots of people have had with the Kryton. probably 90% of Kryton owners don't like the head setup with the lens recessed like it is. I set it up though specifically so that the laser could head stand without affecting the focus as well as not worrying about messing up the focus. Anyway, Knock yourself out and I hope you sell a ton.

Thanks Ken, I don't anticipate a lot of sales on these...

It's one of those things that if a person tried it in person, they would have to have it, but just looking at pictures you would probably pass on it.

Simply because the Kryton is already awesome as it is! This EzFocus adapter just adds a little more functionality is all.

I'll order a few pieces of material in case anybody wants one...
Jay

Oh and as far as focusing on the "fly" even with the Kryton aperture cap in place, I came up with a tool that let me focus the lens, and still allow the beam to be passed



The metal "tabs" inside the diameter of the tube fit into the screwdriver slot on the lens, and since the tube is completely hollow it allows you to twist the lens and still allow the beam to exit to see how your "twisting" affects the focus.

Clever tool there Ken!

Hey did you get the lettering for your meters?
Jay

This looks like just the sort of thing I need! ordering

Got you covered!

Your going to love this adapter...

For installation, press your lens into the adapter first, like the bottom picture shows, then just screw it in!
Jay

This is a very cool idea.

What are the chances of getting this in anything other than plain aluminum?

I have a black and a clear that I might like to add this to.

But this would look funky on the ends if it didnt match.

@icecruncher:Talk to Dark_Horse about anodisation, though I know he is quite busy at the moment.

@JayRob: If Kenom does another run, I will probably get one of these, unless Kenom provides one of these with the next model (I only really came here after the second run, or I would have a collection of Krytons!)

That's the only thing...

Because there are some custom anodized colors in the Kryton's that can never be matched exactly, but it really looks good, even on a custom Kryton. (IMO)

It just highlights the aperture end of the laser! 8-)
Jay

I'll send up getting one at some point

I just won't leave it on permanently

Ie: I'll push it on just far enough to adjust and then remove

But I still think it's a great way to solve the adjustment issue.

I love it I will be attempting a few for me and the kids *muh ha ha ha ha

Here is a picture of how it looks on a Custom Anodized Kryton Groove...



Still looks pretty good I think. But there are a lot of regular aluminum Krytons out there! 1st run smooth barrels, and Groove's as well!
Jay

Jay-my-man,

you are one creative son of a gun *+1 for innovation *8-)

Say, you think I could use it on my Groovy Green... *:P Nah, guess not... *;D

But hey, I may get one anyways for future use. Never know, maybe that DPSS will some day be replaced with a 532nm diode and then I will need collimation and a JayRob EzyFocus[sup]TM[/sup] *

;D Thanks man!

I'll always keep my Krytons, they are a great design from Kenom. He purposely made them so that the lens would be flush. But now you can still stand it on it's head if you want, and the focusing is really nice and precise with my Kryton EzFocus adapter!

No need to buy one for yours, unless you decide to put a blu-ray or red diode in there, and slap the green module into one of my DIY Green hosts.
Jay

I wasn't kidding about a green diode! They will come, it's just a question of time... *

I was looking at these mini green modules...

http://www.laser66.com/html/scl_over.html

They are available up to 100mW's, but are still too expensive.
Jay

Hey Jay.... I just saw this... Nice original design...

I guess there's no reason for Kryton owners to burn
their fingers anymore while focusing... 8-)

Jerry

Thanks Jerry!

I'm going to offer an option for my Kryton EzFocus Adapter to be knurled...



Just add $5 bucks if you would like one with the knurled option! 8-) I think they will look better knurled. Especially on the custom colored Kryton Grooves...
Jay

Great little improvement there, Jay!