Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

PERMANENT THREAD: Ebay& other internet FINDS of interest- read all the OP please sub

Re: PERMANENT THREAD: Ebay& other internet FINDS of interest- read all the OP please

Yeah,
I've been watching them, very intresting. Seems the best "fix" for these divergent high power diodes and the ones with clear covers in handhelds are like jewels. I posted these because they were the first ones i've seen including mounting fixture. Thinking seriously about trying my hand at combigning then correcting two nubm 44's.
Thanks for the link
 
Last edited:





Re: PERMANENT THREAD: Ebay& other internet FINDS of interest- read all the OP please

VirtueViolater said:
Was just checking this diode out on your site. Really nice, this is the first diode to break the $100 barrier in the 510 threaded modules
Sweet!
Click to expand...


Yea may not even end up offering a 22mm 510 option. The diode is case positive so don't know if it is a good idea to have people putting batteries in mods backwards to accommodate it when I do find negative side regulation driver that will work well with the diode. It actually has a pretty crazy pinout.
PyaMd3.gif
 
Last edited:
Re: PERMANENT THREAD: Ebay& other internet FINDS of interest- read all the OP please

Lol,
That'll be the cause of a few dead diodes I'd imagine
 
Re: PERMANENT THREAD: Ebay& other internet FINDS of interest- read all the OP please

Well I did notice that you said 200mW on your page Jordan so what is the output at that mark?
I would boldly let buyers know the pin layout for sure.
Are you going to spectro it? I'm going to end up needing one for my collection depending on actual wavelength. Need to see a data sheet on it.
 
Re: PERMANENT THREAD: Ebay& other internet FINDS of interest- read all the OP please

Found a pair of asphers AR coated for 633nm, anyone who wants to make a beam expander for red, these would be great:


Large 2 3 8" Asphere and PCX Lens Lot | eBay - Try to buy these new and you won't like the price.
 
Re: PERMANENT THREAD: Ebay& other internet FINDS of interest- read all the OP please

20nCi (0.2 gram) Thorium Radiation Detector Check Source Disk - US $15.00 Free Shipping - 5 available at present
s-l64.jpg



30nCi (0.3 gram) Thorium Radiation Detector Check Source Disk - US $20.00 Free Shipping - Only 2 available at present
s-l64.jpg


-Contains Thorium Dioxide (Th232)
-Releases Alpha, Beta, and Gamma Particles
- Disk Measures 1 inch in diameter and 1/8 inch thick
-Thorium is sealed in Epoxy for safety
Click to expand...

CDV-700 Geiger Counter Calibration Check Test Source High Stability Long Life - US $25.55 Free Shipping - 8 available at present
s-l225.jpg

Seller Notes: “Somewhat hotter than OEM CDV-700 sources. Have a calibration value label with them so you can use them to fine tune your CDV-700 geiger counter. Lasts for many decades.”
Click to expand...


-----------------------------------------------------------
jenoptik High Powered Diode Laser 30W - 4d 06h Wednesday, July 6th 2:32PM - current bid $5.50 - Shipping: $13.51
s-l140.jpg
 
Last edited:
Re: PERMANENT THREAD: Ebay& other internet FINDS of interest- read all the OP please

This is an interesting lens if you want to either collimate the output of your laser diode, or build a beam expander but it is biconvex. For beam expanders biconvex will certainly work, but PCX better and aspherical best. At 12 inch diameter either have a helper carrying this lens around, or a tripod.

Large Biconvex 300 mm Diameter Lens About 900 mm Focal Length Optic Glass | eBay

12%20inch%20biconvex%20lens.jpg


I've been tempted to buy it, but the biconvex aspect of it keeps me from doing so. Although I did offer up to 150 for it, turned me down, wants 190 and 75 dollars shipping. Big lenses are interesting, but if building a monster beam expander better to use a large telescope mirror, generally more accurate surfaces with those and the price of used Dobsonian telescopes can be had fairly cheap with most of the work already done. For all I know, this lens might be 4/Lambda or higher accuracy, if so, then it's a good lens and you wouldn't want to pay the new price, many thousands of dollars.
 
Last edited:
  • Like
Reactions: GSS
Re: PERMANENT THREAD: Ebay& other internet FINDS of interest- read all the OP please

Diodes would be ~$300, Optics would be ~$350, mounts would be ~$150, and driver/PSU would be ~$150. Shipping might be another $50. That leaves $500 for assembly cost. I could certainly build that in 2 hours - probably less. If I built these full-time, I would be making at least $500k a year. :shhh:
 
Re: PERMANENT THREAD: Ebay& other internet FINDS of interest- read all the OP please

Alaskan, find out if the beam widths and divergences are close to the same, otherwise it will be a poor fuzzy beam over distance.
 
Re: PERMANENT THREAD: Ebay& other internet FINDS of interest- read all the OP please

The price of green diodes has come down substantially since he built a few of these, otherwise I think he would sell them for less. He has invested in machines to make some of the parts as well as his time aligning the optics and all, I don't think turning these out will go quite as quick as it might seem. I will ask Mateusz how many hours he puts into every one of these and report back to you, if it isn't proprietary information, you might see it takes much longer.

RCB, I asked about how well lined up the three colors are for divergence and I was told they were a very good match.

Cyparagon, I've wondered where you went, seems you haven't been nearly as active as in the past. Check out these lasers Jors makes:

http://atenlaser.com

http://atenlaser.com/shop/index.php?id_category=19&controller=category
 
Last edited:
Re: PERMANENT THREAD: Ebay& other internet FINDS of interest- read all the OP please

Meh, I went camping for a week, and I've been working slightly longer hours because we're busy at work.
RedCowboy said:
Alaskan, find out if the beam widths and divergences are close to the same, otherwise it will be a poor fuzzy beam over distance.
Click to expand...

They'll be adequate since the reds are expanded. You can also adjust the beam shape by adjusting the focusing lens. A sharp focus would yield a line, while a soft focus would yield a square.

Alaskan said:
The price of green diodes has come down substantially since he built a few of these, otherwise I think he would sell them for less.
Click to expand...

Why is that a good reason? If you buy a car at 20k and it's worth 10k a year later, do you still try to get 20k for it?

I bought a half-watt red diode back when they were $200. They're $40 now. Should I try selling it for $200? :p
 
Re: PERMANENT THREAD: Ebay& other internet FINDS of interest- read all the OP please

I was speculating why his price might be dropping, it only makes sense if you can buy the NDG7475T 1W green for 50% less, or $200 instead of $400 etc., you would charge less. How much less, that's another question but I have an answer! Expect the units to soon drop in price by about 25 percent . You are right about how long it takes to build one, except he mills a lot of his own parts so perhaps a day per unit is what I'm thinking, but my question was not directly answered, I wouldn't either. However he did state the problem is not how long it takes to turn them out, the problem is finding buyers.
 
You must log in or register to reply here.


Back
Top