Flaminpyros Stuf

[Pman]

Almost forgot to say thanks for the wire and the heat shrink tossed in

 

[APEX1]

I keep getting asked so I thought I better make a thread with all this info in one place, easier to find that way

hey I sent a pm about the bullet focus ring, let me no if you have any left I'd love to buy one from you now..

 

[starlight]

Well thank you these are some of the neatest tools I own for sure. I made my own addition (a washer with a notch cut out). The washer is so I can press and un-press without removing the wires.

Thank You worth ever penny

 

[VirtueViolater]

Hi Jeff,
Could you send me an invoice for silicone wire and heatshrink to Virtueviolater@hotmail.com

 

[CaliKirk]

Hey I placed an order in 7/02 and just wanted to make sure everything was done correct on my end.

 

[icecruncher]

Hey I placed an order in 7/02 and just wanted to make sure everything was done correct on my end.

Wondering same thing - I placed order about same time

He hasn't been on since 6/29

Don't know whats up

 

[Lifetime17]

Hi,
And i ordered some 21mm contact boards and no word from him or tracking ..And the bad thing is folks pay up front and have to wait..

Rich

 

[ElectricPlasma]

Yep, same problem here too... Been waiting on a custom order for a few months now. Jeff's probably got something important happening, he's usually online and replies to orders and PMs. Very odd for him not to :undecided:

 

[Lifetime17]

Yes this is very unusual of him i think i'll give him a call to see if he is ok . He's a good guy and responds swiftly i just hope things are well with him..

Rich

 

[Pman]

We're you able to get a hold of him Life? All I know is things were just getting worse and worse as far as him being able to get drivers as the source wasn't responding and he was waiting on at least 400 of them. When was the last time anyone was able to complete a transaction with him? I could have sworn the last time I talked to him he was having worse medical issues.

 

[Flaminpyro]

Howdy All

Sorry to be away so long with out telling anyone but I was very busy over the independence weekend and the week before getting ready for our show here, then after the weekend I spent the next 10 days or so working on my property, as my son came here with his excavator and we widened my front yard by 19 feet by 65 feet, it was a lot of dirt to move as I live on a hill side, I had to rent a bob cat for one week and so was very busy with all that, then the last day I ran my foot into an immovable object and I will probably loose the big toe nail on my right foot, I'm still hobbling around here.

So every one who had an order pending has to wait no longer all orders went out yesterday :wave:

I will be here to serve you for the next week then I'm off to Indiana and points south, we'll try and make it to SELEM but will probably only get to be there for the last two days due to a pyro convention, hope to see a few of you at SELEM.

Have a good one :yh:

 

[hakzaw1]

Howdy All

Sorry to be away so long with out telling anyone but I was very busy over the independence weekend and the week before getting ready for our show here, then after the weekend I spent the next 10 days or so working on my property, as my son came here with his excavator and we widened my front yard by 19 feet by 65 feet, it was a lot of dirt to move as I live on a hill side, I had to rent a bob cat for one week and so was very busy with all that, then the last day I ran my foot into an immovable object and I will probably loose the big toe nail on my right foot, I'm still hobbling around here.

So every one who had an order pending has to wait no longer all orders went out yesterday :wave:

I will be here to serve you for the next week then I'm off to Indiana and points south, we'll try and make it to SELEM but will probably only get to be there for the last two days due to a pyro convention, hope to see a few of you at SELEM.

Have a good one :yh:

_____________

stay safe jeff

 

[20516Boredguy]

ATTENTION I will be away and not not able to ship orders from 5-10-17 until 5-24-17, I will be attending CampLEM Mark I in NORCAL

I keep getting asked so I thought I better make a thread with all this info in one place, easier to find that way


Electronics
http://laserpointerforums.com/f39/a140-445-tested-laser-diodes-fs-56018.html#post790579
http://laserpointerforums.com/f39/red-650-660nm-violet-405nm-laser-diodes-89547.html#post1302337
http://laserpointerforums.com/f39/x-drive-x-boost-88589.html#post1289145
http://laserpointerforums.com/f39/sale-v5-flex-drives-63653-3.html#post910006
http://laserpointerforums.com/f39/sale-flexmod-p3-drivers-63932-3.html#post915053
http://laserpointerforums.com/f39/super-3-amp-v2-1-test-load-78287.html#post1125795
http://laserpointerforums.com/f64/b...lated-wire-heatshrink-62137-5.html#post882526
http://laserpointerforums.com/f39/laser-wiring-kit-67288.html#post969689
http://laserpointerforums.com/f39/solder-flux-68199.html#post983856
http://laserpointerforums.com/f39/grounding-ring-95546.html#post1387997
https://laserpointerforums.com/thre...sulated-wire-and-heatshrink.62137/post-882526

Build Kits
http://laserpointerforums.com/f64/aurora-sh-032-kit-51476-2.html#post711053
http://laserpointerforums.com/f64/fs-cree-xpe-aa-host-kit-57053.html#post806513
http://laserpointerforums.com/f64/fs-brushfire-c3-aa-kit-52162.html#post725767
http://laserpointerforums.com/f64/fs-tank007-complete-build-kit-43865-5.html#post581008
http://laserpointerforums.com/f64/fs-7935-host-complete-kit-43867.html#post581036
http://laserpointerforums.com/f64/fs-13096-host-complete-build-kit-43981.html#post583098


Machined Parts
http://laserpointerforums.com/f64/custom-copper-heatsinks-made-order-42626-4.html#post559975
http://laserpointerforums.com/f64/fs-custom-machned-aluminum-heatsink-s-45973.html#post618627
http://laserpointerforums.com/f64/fs-custom-focus-rings-any-build-52448-4.html#post730873


Laser Tools
http://laserpointerforums.com/f64/diode-press-sale-15-00-a-42590-6.html#post559262
http://laserpointerforums.com/f64/diode-press-sale-pushes-out-diode-42614-3.html#post559783
http://laserpointerforums.com/f39/diode-press-sets-80158.html#post1151767
http://laserpointerforums.com/f64/fs-laser-tools-44115-2.html#post585654
http://laserpointerforums.com/f39/module-puller-78408.html#post1127579

Optics
http://laserpointerforums.com/f39/fs-dichros-63728.html#post911483
http://laserpointerforums.com/f39/fs-front-surface-mirrors-63731.html#post911511
http://laserpointerforums.com/f39/fs-ar-coated-lenses-63735.html#post911523

Misc
http://laserpointerforums.com/f64/fs-laser-parts-44733-7.html#post595334


that's enough for now...

You still around?

 

[Unown (WILD)]

You still around?

Try sending a pm

 

[wolfram]

He checks pms from time to time. I don't think he is set up to sell right now, as he recently moved.

 

[IWLSR5]

I sent him a PM about a week ago with no response.