Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

The REAL Kryton GB round #3. Taking payments now.

Thanks for the update Kenom.

I hope Pontiacg5 is ok. He hasn't been responding to PMs (I PMd him about a week ago) and before that he was very chatty giving me info on lathes :). Then all of a sudden he seemed to disappear.
 





:D good to hear,thnx for the update
Gonna have to order a pile of drivers and diodes soon:p and a nice case to store them in!
 
Kenom said:
I received the Grooves in the mail today. I'll start the anodizing process and keep everyone updated as I go.
Click to expand...

The finished krytons are getting closer, very happy with this news :)
Hope all goes well for you and the anodizing process Kenom.

As far as Pontiacg5's situation goes sure hope it's nothing serious:yabbem:
 
Awesome ken

just wondering, did my kryton smoove ever get done, or will i get a groove instead?

Rob
 
robjdixon said:
Awesome ken

just wondering, did my kryton smoove ever get done, or will i get a groove instead?

Rob
Click to expand...

^^^^^^^ bringing to mind --

You wouldn't happen to have a head for a Kryton Smooth, would you, Ken (or anybody else)?

Peace,
dave
 
Sorry guys, I won't be around for a bit longer. Our house received some pretty serious damage so I've been working on moving stuff out of the way to fix everything. Kind of have to hurry, winter's getting close...
My dad is coming back to town to help fix everything this Thursday, he's leaving on Monday so I should (hopefully) be back then. Unless a truss or something decides to knock me in the head :D

Are smooths just a groove without the grooves? If so I have two "smooth" barrels that I would swap with Ken for somebody if it's alright with him. I don't have any grooveless heads though...

If anyone needs to get ahold of me for any reason e-mail me, pontiacg5 et riceprecision dawt com
 
Pontiacg5 said:
Sorry guys, I won't be around for a bit longer. Our house received some pretty serious damage so I've been working on moving stuff out of the way to fix everything. Kind of have to hurry, winter's getting close...
My dad is coming back to town to help fix everything this Thursday, he's leaving on Monday so I should (hopefully) be back then. Unless a truss or something decides to knock me in the head :D

Are smooths just a groove without the grooves? If so I have two "smooth" barrels that I would swap with Ken for somebody if it's alright with him. I don't have any grooveless heads though...

If anyone needs to get ahold of me for any reason e-mail me, pontiacg5 et riceprecision dawt com
Click to expand...

The "Smooth" was smaller. It was designed for two 16340 batteries.

22mm-OD -- 17mm-ID

It preceded the Groove

Peace,
dave
 
Yes! Grooves are coming! I can't wait to get them! The new 445nm will be a great addition to my 405nm! :)
 
I have not been able to do anything thusfar with the barrels as the weather has been very cold and the anodizing bath needs to be above a certain temp to work. that being said I am looking for a heated garage with electricity that I can do this stuff in. has to be well ventilated as well. I refuse to breath sulfur dioxide. I will keep everyone updated.
 
Thanks for the update/status Kenom. Much appreciated.

I imagine just polishing them will take a century or two. For those that only ordered them without anodizing are you going to work on them now or wait until you can find a place to do anodizing? I remember you saying that they will probably ship first since they don't need anodizing. I ordered a mixture so I know I will wait until all of my order is done... Not worth me paying for another shipping charge just to get the bare polished ones early.
 
Pontiacg5 said:
Are smooths just a groove without the grooves? If so I have two "smooth" barrels that I would swap with Ken for somebody if it's alright with him. I don't have any grooveless heads though...
Click to expand...

I believe (unless you've sent one to ken,) one of the 2 "smoove" barrells is mine, as I spoke to you and ken about it a while back. Obviously I'm not going to be especially disappointed if i get 2 grooves, but I think that is the reason for the 2 smoove barrels being created

Rob
 
Kenom said:
I have not been able to do anything thusfar with the barrels as the weather has been very cold and the anodizing bath needs to be above a certain temp to work. that being said I am looking for a heated garage with electricity that I can do this stuff in. has to be well ventilated as well. I refuse to breath sulfur dioxide. I will keep everyone updated.
Click to expand...

Add more pieces... crank up the amperage :evil:
 
If the anodizing is going to hold things up, Ken, I can take mine in bare, polished finish.

Peace,
dave
 
Kenom said:
I have not been able to do anything thusfar with the barrels as the weather has been very cold and the anodizing bath needs to be above a certain temp to work. that being said I am looking for a heated garage with electricity that I can do this stuff in. has to be well ventilated as well. I refuse to breath sulfur dioxide. I will keep everyone updated.
Click to expand...

Cold is what you want... Warmth speeds up the process, but can
lead to a 'soft' oxide layer, or even worse burning.


You can place an aluminum plate on the anode and the tank will
come up to the desired temp...
 
Last edited:
Are we still on for the angry mob against the unanodized grooves owners just thought id confirm before i buy my pitchfork :P..


@kenom, can you try and post a couple vids on how you do the custom annodzings would be great to see how some of them are done..

thanks cant wait.
 
You must log in or register to reply here.


Back
Top