Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

CLOSED - COLLECTING $ Dorcy Jnr GB - $15.00 Shipped- 07/12/09

mattmagic100 said:
hahaha exactly, so if we decide to enter the HS through the top, then we could use that oustide set screw idea to keep it still.
Click to expand...

With the existing heat sinks, we have ~4mm diameter too wide a host.

Peace,
dave
 





mattmagic100 said:
so if Dark fixes the heatsinks, do you think putting a set screw outside of the host will solve the problem.
Click to expand...

If the heat sink fits, the set screw may be the only way to go besides thermal epoxy with this host.

Peace,
dave
 
Dave, PM sent.
There is still a groove where the lens was, right? Is it similar to the groove in the original DJR-head?
It is tough to tell without seeing it closely, but I am guessing I can make a stepped heatsink which will load from the front and maybe we can use an O-ring or snap-ring in the lens-groove to retain the HS....velcro? :D

daguin said:
This will be a problem then. The front part of the head is .950 ID .795 will fit into the rear, but there will be nothing for it to "stop" against.

The mail has come and gone today. No package yet :(

@ Barry -- PM me your address. I'll get yours mailed out to you so you can look at what we are dealing with

Peace,
dave
Click to expand...
 
Hi guys,

I've just caught up on all the posts again and realized what's happened, I haven't got my host through yet but this really sucks.

The whole reason I bought this host was because I wanted to use it with my Dorcy jnr full body heatsink which I purchased a while ago, now this has pretty much rendered it usless? :(

So we aren't getting the hosts which were originally displayed on the first post?
 
The heatsinks should be showing up today, ''fingers crossed''.
I tell you, I'm getting fed up with usps. I have 5 packages floating around out their. Granted 2 will be shipping today. However their is one that was mailed from just one state away, almost a week and a half ago:(
 
Asherz said:
Hi guys,

I've just caught up on all the posts again and realized what's happened, I haven't got my host through yet but this really sucks.

The whole reason I bought this host was because I wanted to use it with my Dorcy jnr full body heatsink which I purchased a while ago, now this has pretty much rendered it usless? :(

So we aren't getting the hosts which were originally displayed on the first post?
Click to expand...

Unfortunately, no we are not getting the hosts in the first picture but if you go to page 8 (i think it was) itll show a comparison of the original dorcy and the ones that we bought.

rpaloalto said:
The heatsinks should be showing up today, ''fingers crossed''.
I tell you, I'm getting fed up with usps. I have 5 packages floating around out their. Granted 2 will be shipping today. However their is one that was mailed from just one state away, almost a week and a half ago:(
Click to expand...

thats really sucks. ya i ordered christmas gifts for my parents yesterday and both shipped today so ill see how that goes. hopefully they arrive before christmas. and i have 2 other package in transit.
good luck with your packages i hope they come soon.
 
I got the heat sinks today. The are NOT going to work :( Barry will have his just before Christmas so we will get some idea of what needs to be done.

Peace,
dave
 
As soon as I get the new host, I will begin a design for them. I will have to be creative, but I am sure we will come up with a great solution.
Worry not :)
Barry

daguin said:
I got the heat sinks today. The are NOT going to work :( Barry will have his just before Christmas so we will get some idea of what needs to be done.

Peace,
dave
Click to expand...
 
So if we have to use a Set Screw that could be a problem for us with out Taps and the screws them selfs, and i for one dont trust my self to drill a stright hole lmao any ideas?

Cheers
Josh
 
daguin said:
I got the heat sinks today. The are NOT going to work :( Barry will have his just before Christmas so we will get some idea of what needs to be done.

Peace,
dave
Click to expand...

so are you going to be returning the heatsinks back to Barry for the other ones he will come up with?

Dark_Horse said:
As soon as I get the new host, I will begin a design for them. I will have to be creative, but I am sure we will come up with a great solution.
Worry not :)
Barry
Click to expand...

thanks so much Barry. I didnt order a heatsink the first time but i will definitely order one this time mostly because i dont have a choice. haha =P

ZheolD said:
So if we have to use a Set Screw that could be a problem for us with out Taps and the screws them selfs, and i for one dont trust my self to drill a stright hole lmao any ideas?

Cheers
Josh
Click to expand...

haha same here. i wont be able to drill a perfect hole either.
 
Sorry I've been away, I've been and still am very unwell.

I've emailed Mark from Dorcy twice now, only because he sent me a sample of this Dorcy, which was the CORRECT one. Then he sent these ones? I will be talking with him as soon as he gets back to me.

I apologise so much for this people.. I thought this would be perfect... I guess Dave is right, the item number is correct and there is no mistake there, but I wanted the Dorcy's I got as a sample. Not this.

I will try get on here as much as I can, but I've been in hospital a fair bit over the past 2 weeks, so slowly getting there.

Merry Christmas everyone.

:)
 
Last edited:
You must log in or register to reply here.


Back
Top