Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

470nm diode

They are different. The 'good old projector 445's are 5.6mm and are multimode and do up to 1.8-2W but you get a line output

The 'new' 450nm diodes are 3.8mm, single mode, and will do around 50mW I believe, but have good beam specs.. but i'm not sure anyone has 'pushed' any of them yet. These are most likely what's used in pico projectors currently.
 
Last edited:





qumefox said:
The 'new' 450nm diodes are 3.8mm, single mode, and will do around 50mW I believe, but have good beam specs.. but i'm not sure anyone has 'pushed' any of them yet. These are most likely what's used in pico projectors currently.
Click to expand...

The single-mode blues have "ok" beam specs. They're better than the blue multi-modes, but they're not as good as a 405 or 658 - at least from what I've seen.
 
The newer 80mW 450 diodes can be run at 200mW per the manufacturer (via voice discussion with Sales Manager). I have one, but it's just an inventory part. If they say it can go to 200mW, a good LPF rule would say it can go to 300 or 400mW pushing it. It must be a better wafer/ die. Specs are 440nm to 450nm typical, to 460nm max.
 
Actually it'd have the added benefit that the harder you pushed them, the higher the wavelength would get.
 
Laser showed up. I ran by and got it out of the mailbox at lunch. But i'm at work, so no tests until tonight. heh.
 
qumefox said:
Laser showed up. I ran by and got it out of the mailbox at lunch. But i'm at work, so no tests until tonight. heh.
Click to expand...

party0021.gif
 
Whelp... This is one of those, "Man, I hate it when i'm right...." moments but... SCIENCE! doesn't lie. :(

Measured 452.4nm at 27mW

I unscrewed the lens to take a peek and it is indeed a 3.8mm diode. I know I can get these particular 3.8mm 450nm raw diodes for around $60 each in quantity.. so Unfortunately, you kinda got ripped on $200 for this one Ablaze.

470.jpg
 
Last edited:
:( well that's sad but it is what we expected....mabye some day thanks for testing it qumefox
 
Not really sure. It's leaving out the zeros for some reason. I noticed that too. Though if anyone thinks i'm playing with the numbers.. I'll happily redo it and record a video of the testing.
 
Last edited:
That was a disappointment, but as expected...
 
Last edited:
You must log in or register to reply here.


Back
Top