Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

$4.35 405nm eBay pen SUPER OVERSPECT Must see!!

+2 for the OP nice find and share
19 days to Texas.
With not new batts(barely making 1.5vdc)
1)92 mW
2)72mW
3)41 mW
4) DOA
will do further checking and also try with new batts and a single 10440=
The DOA may work= but even so-- good deal- they make Heatsinks designed for use with this size pen.
a few of these wil go into my mini lumia box-
power will be 18650s- should have long runtime.
putting another into a RGV Spiro mini.
update-using a 3.75VDC 18650 #3 went from 41 up to 57mW
the DOA is still afaik DOA.
The 92mW (#1) jumped up to 105mW

PHRs IMHO

UPDATE
contacted the seller and they offered a free replacement --no questions asked--SWEET
 
Last edited:





^Tell the guy that it is broken.

He´ll send you a replacement, I´m sure.
 
^^^ I agree but if not- how can I really complain- I may order a few more and ask tem to add an extra--Friends are having a huge 3 day party and I plan to paint a 4X8 GITD boards and pass these out for instant messaging-- do you think 21 kegs of Coors will be enough?? we will also have 20 cases of canned beer and a crapload of hard liquor-- Ya/ll are invited-- Oct 18.19& 20 Angleton Texas--at the Brazoria County Fair Cook-off- we wil have spent 16K$ when it is over--wish us luck!!

The PitMeisters--Godfathers of Smoke== this years slogan is--'WE'RE SEXY AND WE SMOKE IT"
LMFAO
THIS IS YEAR 13 FOR THE TEAM.
 
Anyone got any tips for getting the module out of the host? I've got the silver bit off but struggling to find a safe way to get it out.
 
I got my 2 532's , not even worth breaking out the kenometer. Look like a couple of mw each.

As for removing the module, heat it up to the point where it hurts to touch, but not burn you, and it'll pull out with some long nose pliers.
 
I started to open the 405 defective one I got- there is a foam insert around the spring- it can be gotten out with some fiddling but easier if you cut with scissors and pluck with tweezers.
You can see the driver from that end -the silver front piece seems to be glued i place and does not unscrew easily--I put it aside at that point for another day.. I may try some glue release spray. I have a expensive can of 'Blaster PB'-

imo using too much heat could be a mistake so...
 
Tried heating it up and it still wont budge.
They got these things in pretty damn tight.
 
Got one of mine today, the 532 actually,
Very nice, 30mw on the dot & TM00 ( perfect dot )

:D
Still waiting on the 405 :)
 
I got my 405nm and the 532nm penlaser. I tested it at various voltage with my bench PSU. They represent the voltage of the most popular batteries :
2.6V --> two AAA rechargable cells
3.0V --> two primary cells
3.7 --> one 3.7V li-ion cell

405nm 3.0V, 2.6V and 3.7V. No use to use 3.7V with this laser. The max output is already reach with 3.0V.
405nm%20penlaser%20LPM%20chart.jpg


532nm 2.6V, 3.0V and 3.7V. It seems the driver is overheating with higher voltages. Quite disappointing output from this green penlaser.
532nm%20penlaser%20LPM%20chart.jpg
 
+2 for the OP nice find and share
19 days to Texas.
With not new batts(barely making 1.5vdc)
1)92 mW
2)72mW
3)41 mW
4) DOA
will do further checking and also try with new batts and a single 10440=
The DOA may work= but even so-- good deal- they make Heatsinks designed for use with this size pen.
a few of these wil go into my mini lumia box-
power will be 18650s- should have long runtime.
putting another into a RGV Spiro mini.
update-using a 3.75VDC 18650 #3 went from 41 up to 57mW
the DOA is still afaik DOA.
The 92mW (#1) jumped up to 105mW

PHRs IMHO
UPDATE

I contacted the seller (Value offer)aka Etimeshop and replied the next day asking for my home addy so they can send me a replacement 405- thats the kind of customer support that always makes me smile and order again( sent payment for four more and asked them to send 5)

good people imho:wave:
:D
hak
 
I've recently got 8 greens more. The shipping was 6 days to Croatia (including weekend)! I've never seen this fast free shipping.

The output varies, some have great beam spec, but lower power; some have higher power, but worse beam specs. And 2 of them have both good beam specs and power!

I plan on using 10440 batteries, with spacer; cause the output falls dramatically if the voltage is under 2,8V.

Definitely worth adding to your collection!
 
Valueoffer/etimeshop. has replied three times in five days= and is sending me a free replacement for the one DOA I got in an order of four 405s.
A while back John Lawson started a thread on pot modding the green pointer from the same seller- I put two of the modules into better heatsinked hosts- one failed finally after lots of use , the other still works fine. makes ~40mW..
 
Those look interesting. I just recently found out that I have an obsession with diffraction gratings. Please review it on here ;)
 
I bought 2 of them :) I also have another one from a different seller. I'll let you know what I think of them.:beer:

Anyone tried to "pot mod them"?
 
Last edited:





Back
Top