jayrob

Hey jay i have an offer $70
I hate to give this awaybut being you did
the lenze on the dido (ha) i want you to be the owner.
I'll toss in all the goodes i have (see pic) and send it frist call US mail.
i want 50, but 20 is what it will take to send all of it (saftly)
Let me know @larrball@hotmail com

I know you like off road riding Jeff...

Here's me on my CRF450R:

OMG I have never looked at your pictures befor, Man you rock ! I'm a diver also and like fast things between my legs
We got to get together sometime and swap lies !!!

Sure thing, just PM me for ordering...

Oh man thank you for the +rep!! And you are very welcome and anytime too you are great man:bowdown::bowdown:!!
Jay I also need to order 2 405-G1 lenses from you if you don't mind me adding to your busy schedule again man! Best regards:yh:!!

My SolarForce kit is a great choice that has a massive heatsink and very easy to assemble. Just take a look at the options here:
http://laserpointerforums.com/f64/fs-solarforce-l2p-kit-18650-host-massive-heatsink-53746.html

If your aiming for 200mW's, I would recommend a 445 diode set at 450mA's and an AixiZ 445 lens for about 200 to 240mW's.

I don't sell the diodes, but there are several selling the diodes in the BST section. Send me a private message about getting the SolarForce kit! :)

Hey man. I've been lurking these forums on and off for a while now, and I'm pretty impressed by the reviews you've been getting!

I was just wondering if you could lend me your wisdom briefly to sort out what sort of kit I'd need to make a lazor. I'm not after one with a particularly high output for now - I'm only aiming for 100-200mW - it's more more for making cool photographs with and pointing at stuff than for burning.

The long and short of it is, the end result would ideally be a laser that will knock out ~150mW of power, run continuously without heat issues, and have a mahoosive battery. I like the look of the SolarForce host, so I'd probably go for that. It's also nice that I can bump the power up a bit later without having to get another host...

Any ideas what's the best way to go about this whole thing? I can afford somewhere around $150 without too much trouble, but if spending a bit more will make a good difference I'd be able to.

Cheers for your time!

I would have to get that host in hand to check it out to see if it is suitable...

It's best if you go with a build that I already have in my list! :)
http://laserpointerforums.com/f39/jayrob-build-kits-lenses-other-stuff-listed-here-44227.html

You will have to get your own diode though. I don't sell diodes or complete lasers...

You'll need proper eye protection too!

Send me a private message...

Hi Jayrob, i really like your builds and im hoping that you can make me a custom heatsink to fit this torch off ebay: 3W LED super bright Flashlight outdoor waterproof 5026 (eBay item 170518206367 end time 21-Mar-11 20:42:22 AEDST) : Sport
=106987

also what kind of drivers would i be able to
fit into that thing?

Thanks

Btw im a newbie, i joined lpf a week ago and developed an intrest in lasers 3 weeks ago

My kits do not include the laser diode. I don't sell complete lasers. Here's a list of my kits:
http://laserpointerforums.com/f39/jayrob-build-kits-lenses-other-stuff-listed-here-44227.html

Send me a private message for ordering! :)

Hey man can you sell me a laser a cheap one but that can burn things. Can you ship to Mexico? thanks. worldscott sent me to you

Well yes, I sell the complete assembled lens. But to some who only want the bare optic, it is also available...

Send me a private message for ordering and other questions!

Well my friend has one from you and it screws right onto my Aixiz housing (maybe it was modified). It looks just like the picture of you holding it.

I sell the bare lenses but they do not fit an AixiZ lens nut unless you modify it. Or it can fit loosely into the threaded area where the retaining ring goes. And it will have to be glued in place.

Here's picture showing the modification:

Hey,

I was wondering if I could buy a 405-g lens from you. I have bought the aizix housing so I just want to be able to screw the old lens off and another new lens on.
Please bill me at paypal my email address, johnbordelon@yahoo.com

The address is

John Bordelon
865 Iris Street
Baton Rouge, Louisiana 70802

Sure just send me a private message for payment...

Please read up on proper eye protection if you have not already done so!