Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers

Paul, I think its the NUM44 build he bought..in post #503
 
Last edited by a moderator:





Hi, Peter. I know, but was combining two conversations in that post. I had talked to Rich about the green laser build and recommended laserboystuart come here to buy the NUBM44 build in his welcome thread.
 
Hi, :thanks::sold:
A new host for sale..Takes 2x18650's Copper core and a bored out back of the sink for the copper driver wedge included..
120.00 + 7.15 2-day priority shipping this is prewired wit 24AWG silicon wire.

Rich:)
 

Attachments

  • fullsizeoutput_5e7.jpeg
    fullsizeoutput_5e7.jpeg
    184.4 KB · Views: 31
  • fullsizeoutput_5e5.jpeg
    fullsizeoutput_5e5.jpeg
    168.9 KB · Views: 25
  • fullsizeoutput_5e6.jpeg
    fullsizeoutput_5e6.jpeg
    169.2 KB · Views: 23
  • fullsizeoutput_5e9.jpeg
    fullsizeoutput_5e9.jpeg
    189.6 KB · Views: 21
  • fullsizeoutput_5ea.jpeg
    fullsizeoutput_5ea.jpeg
    161.4 KB · Views: 23
  • fullsizeoutput_5eb.jpeg
    fullsizeoutput_5eb.jpeg
    161.1 KB · Views: 26
  • fullsizeoutput_5ed.jpeg
    fullsizeoutput_5ed.jpeg
    183.3 KB · Views: 22
Last edited:
Hi,
Paul.
Thank you this one took sometime but came out great . the sink can be removed to heat sink the driver to the copper wedge inside the main sink.

Rich:)
 
What hold the heat sink in place if it can be removed? I know that sinner would, at least sometimes, thread the heat sink and the host barrel. That would be a lot of work. What did you do to overcome this problem?
 
Hi Paul very simple i also though about threading , it take a long time to machine a piece so i bore out the back of the sink and fit it tight to the tube. And to hold it in place one 4-40 SS set screw keeps it tight . The AL is soft so the set screw bites the AL ,been making all my hosts this way except for the pens that are one piece.

Rich:)
 
hi,
its makes access easier and to work when building, The heat dissipation is the same . And if the customer breaks a wire off they can just push the contact board out through the bottom by taking offf the tail cap.

Rich:)
 
Another good looking host Rich. :bowdown:

Hope it find a good home. Best wishes with your sale(s) :)
 
That host is very nice, the metal end button cover also improves it quite a bit in my opinion. Sold!
 
Sorry for the double post,

but Alaskan if your thinking about a powerful green, I haven't seen or read a build with the new n520 yet. It might be worth taking a look at? Thought about trying it out myself in a build. :thinking:

Thinking it might go real good with that beauty of a host you just bought off Lifetime?? :)
 
Last edited:
I know Alaskan has a 3 watt 532nm DPSS laser. I think he has an even more powerful one too. A 5 watt? He's no stranger to powerful green lasers.
 
Alaskan memained to me that he was thinking of using a "powerful green diode" in the host he just bought off Rich. Since I havn't seen or read of anyone using the new n520 in a build yet thought it was worth a mentain. :thinking:
 
You must log in or register to reply here.


Back
Top