Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Post your mA and mW

Well it can't be worse than overdriving it by 150% like some people here will be doing. Mariomaster told me that the threshhold for these diodes is ~250ma, but he didn't measure the output. In the video you can see the output is 80mw @ 300ma, so you could have one of these putting out 50-80mw that would last a really long time. Even if it was only 50mw though it is still dangerous, and you still must practice safety precautions while using it.
 





SpyderFire said:
post #2 is LPF , RAPierce
Click to expand...

I must have missed that. :thanks:
Do we know what lens MarioMaster is using?
Time to dig through the mess of posts...

Edit: He is using Aixiz acrylic.

Once we have more numbers on these diodes I hope we can get a chart going like francorob made for the 8X and 12X...
 
Last edited:
You can see the jump in power on my graph at the same current on mariomasters line. at first he was using aixiz acryllic(all he had). Then he just ran it without a lens.
 
Hemlock_Mike said:
Has anyone here actually tested one of these or is this data stolen crap?
HMike
Click to expand...

This graph from a PL user is very close to the measurements that I got at 475mA's. (depends on the lens used - He used a different lens than the ones I tested I believe)

PL%20Graph.jpg




Now take a look at my measurements shown here: (pictures, diversion, and other information here Mike)
http://laserpointerforums.com/f65/445nm-a130-lens-comparisons-51456.html




kevinmassey said:
I'll try and make a graph, or chart of everything posted here so we can get a good idea of the power curve of these things. I'll just update this post as the info comes in.


Let me know if I can do anything better with the graph. I was using Francorobs as an example.
Click to expand...

graph445.jpg


This graph is great, but we need to mention what lenses were used with each persons measurments. For instance, mine was with the AixiZ 405 glass lens. But SpyderFire is using the 405-G-1, and I think MM is using AixiZ acrylic...
 
Last edited:
kevinmassey said:
...so you could have one of these putting out 50-80mw that would last a really long time....
Click to expand...


Darn, that's still too high for me. Even with proper eye protection I wouldn't want to play around with that.


I really just want something to play around with, but I guess these are too powerful for that.
 
Look at the graph jayrob posted above it seems to show the thresh hold current at 200 and power output start well below 50mw. Don't give up hope yet!
 
680ma 634mW w/405-g-1 and micro boost in an igorT host and h/s

this is the best laser i have ever seen
 
Glutton said:
680ma 634mW w/405-g-1 and micro boost in an igorT host and h/s

this is the best laser i have ever seen
Click to expand...

Ohh nice, I may set mine higher than I had planned!!! I cant wait to hook it up to a flexdrive, just using rkcstr at the moment!!

And I agree, this is an amazing color, and makes a fantastic laser!!!
 
Alright you guys made me give in...

Had to have it at class 4 power. :cool:

640mA's - 530mW's with AixiZ 405 glass lens...
 
Last edited:
Kingdave! You need to get that thing measured on a real meter so I can add it to the graph!
Oh and the graph is updated with jayrobs, and gluttons info.
 
Last edited:
You must log in or register to reply here.


Back
Top