Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers



Laser Pointer Store

Post your mA and mW

rpaloalto

New member
Joined
Jun 11, 2009
Messages
1,257
Likes
110
Points
0
Hey everybody I thought I would start a thread. So we can share our settings for the new 445nm diodes.

Casio A130 diode
Flexdrive v.5 At 750mA
Output is 604mW with aixiz 405nm glass


More and more of these diodes will becoming into our possession. Lets share what mA we decide to go with. If you have a LPM share your output too.
 
Last edited:

Joined
Nov 4, 2009
Messages
1,203
Likes
50
Points
0
I'll try and make a graph, or chart of everything posted here so we can get a good idea of the power curve of these things. I'll just update this post as the info comes in.


Let me know if I can do anything better with the graph. I was using Francorobs as an example.
 
Last edited:
Joined
Jan 15, 2008
Messages
3,588
Likes
80
Points
0



Also, i posted a testing of mariomaster on youtube, i write the mA and the mW...
 
Last edited:
Joined
Nov 4, 2009
Messages
1,203
Likes
50
Points
0
What lens are you using ranged units?
And what current was it at when it was putting out 1W
 
Last edited:

Hemlock_Mike

Well-known member
Joined
Jan 7, 2007
Messages
6,275
Likes
313
Points
83
Rpaloalto ---

Lets see your results first. What is the data of your diode?
I hope you got a good one.

HMike
 
Joined
Oct 7, 2009
Messages
1,054
Likes
44
Points
0
Think Im gonna start my first one around say 550-600mA, Ill post back when Ive got the diode in hand, which shouldnt be much longer now, mario is shipping mine tomorrow! Wish I had a new LPM, mine uses wavelength settings, and doesnt have ones for exotic wavelengths.
 

jayrob

Well-known member
LPF Site Supporter
Joined
Sep 21, 2007
Messages
9,867
Likes
529
Points
113
What lens are you using ranged units?
And what current was it at when it was putting out 1W
If I'm not mistaken, he's just posting graphs from other builders for now...

I think I saw that graph on PL...
 

FireMyLaser

Well-known member
Joined
Jan 12, 2008
Messages
3,059
Likes
144
Points
63
The graph is not made by rangedunits. You MUST give credit to who made it ranged!
 
Joined
Nov 22, 2008
Messages
1,550
Likes
54
Points
0
Wow yours seems to be alot more efficient than ranged units... Graph updated.
That's because the lens they used was different. Can OP be updated to mention the lens used (and meter, any difficulty testing - like not all light on lens?) as well?
 

SpyderFire

New member
Joined
May 27, 2010
Messages
426
Likes
32
Points
0
2nd Build - Labby - AMC7135 driver @ 1.050A - putting out ~1W

3rd Build - Jayrob 18650 - Microboost set to 900mA - putting out ~980mw
 
Joined
May 2, 2008
Messages
2,031
Likes
97
Points
0
2nd Build - Labby - AMC7135 driver @ 1.050A - putting out ~1W

3rd Build - Jayrob 18650 - Microboost set to 900mA - putting out ~980mw
I'm also building mine in a 18650 kit. Have you had any trouble with the clicky as of yet (melting)?

EDIT: Also did you use the same lens for both of those? If so then you can clearly see the efficiency go down at this high current :undecided:
 
Last edited:




Top