Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

jayrob Build Kits, Lenses, and Other Stuff Listed Here!






My God Jayrob you're still at it!

I've always imagined many many years from now I'll have grand kids that will be into lasers just like myself, I'll tell them to check out LPF and order a kit from Jayrob.
This speculation isn't too far off from reality, give it another 60 years.
 
Thanks Jay, I had fun building my first 445 laser

Cant wait to build my next one from you

+rep
 
i got my 1 watt kit today... i soldered the wires to the diode twice, each time realizing i assembled it wrong...but no matter, its all good now :P


thanks so much jay, your kit is fantastic. i have been telling everyone about you!




thanks again!
 
Last edited:
Hello jayrob, I'm currently looking at building a 1000mw blue laser using a blue ray diode i really like your work and would like to order some of your kits. I was wondering if any of your smaller laser kits could handle that power load.

Any information would be greatly appreciated. Adomrob.
 
adomrob said:
Hello jayrob, I'm currently looking at building a 1000mw blue laser using a blue ray diode i really like your work and would like to order some of your kits. I was wondering if any of your smaller laser kits could handle that power load.

Any information would be greatly appreciated. Adomrob.
Click to expand...

Generally, the smaller the build, the more difficult...

But for 1 Watt or higher of 445, I would recommend at least an 18650 supply.

Here's some of my kits that are easier for assembly:

I sell complete builds minus the diode. You can get your 445 diode pre-installed into an AixiZ module with lead wires soldered on from DTR:
1 5 2W 445 Blue Laser Diode in Module w Leads | eBay

Or also from daguin
http://laserpointerforums.com/f39/fs-445nm-blue-diodes-stock-61660.html

If you get your diode pre-installed into an AixiZ module with lead wires soldered on, you will just solder your diode leads, to my driver leads. ('Hot' option kit)

Note: You will not be using the back 'barrel' part of the AixiZ module. Just the front 'business end'.
Also, you will not be using the diode case pin with my 'Hot' option kit. Just the positive and negative pins...

Here are a few of my 'easiest assembly' kits:

18650 (C6) kit
http://laserpointerforums.com/f39/fs-18650-build-kit-easy-assembly-blu-ray-red-43857.html

SolarForce kit
http://laserpointerforums.com/f64/fs-solarforce-l2p-kit-18650-host-massive-heatsink-53746.html

Maglite Monster kit
http://laserpointerforums.com/f64/f...exmodp3-side-button-forward-clicky-57278.html

Saik kit
http://laserpointerforums.com/f64/f...ons-including-32600-li-ion-battery-65982.html

Frankenstein kit
http://laserpointerforums.com/f64/fs-rl-2088-frankenstein-kit-flexmodp3-66330.html

There are options with each kit, just send me a PM and let me know your list of options, and I'll get you a total….

:thanks:
 
Please send me a total price for the build with the following.
1- Solarforce L2P Gun Metal Host
1 - Hot Option set to 1.7 AMP (Will use 445 Module)
1 - EZ Focus Smooth
1 - Aixiz 445 Lenz with Ring

Send me message please on payment and processing info and I will get the ball rolling.

Jeff
 
jslimjeff said:
Please send me a total price for the build with the following.
1- Solarforce L2P Gun Metal Host
1 - Hot Option set to 1.7 AMP (Will use 445 Module)
1 - EZ Focus Smooth
1 - Aixiz 445 Lenz with Ring

Send me message please on payment and processing info and I will get the ball rolling.

Jeff
Click to expand...

Sending PM... :beer:
 
Hi,

I'm looking to purchase a 50mW green laser line pointer with an on/off switch. Does this even exist?

Thanks!
 
tasdvl9 said:
Hi,

I'm looking to purchase a 50mW green laser line pointer with an on/off switch. Does this even exist?

Thanks!
Click to expand...

I have a nice green kit that can be assembled in less than 5 minutes: (links to the modules are in my thread)
http://laserpointerforums.com/f64/fs-stainless-steel-green-kit-polished-easy-assembly-56412.html

One question. What do you mean by ‘green line’ laser? If you mean that you want it to produce a long line, then it can be achieved by using a line diffraction grating. Let me know if this is what you mean, and I can set that part up for you...

Send me a PM! :beer:
 
Thanks Jay for the pen kits:) Shipping was FAST and they look and feel like quality.
Pete
 
Pman said:
Thanks Jay for the pen kits:) Shipping was FAST and they look and feel like quality.
Pete
Click to expand...

Glad you like them! :)

Check out my latest and greatest here: :D
http://laserpointerforums.com/f42/d-mag-custom-head-bells-whistles-83063.html

DMag%20Custom%2013.jpg
 
Last edited:
Not sure if this is the right place to ask buuut...I should do it anyway.

I have a 1W blue laser diode driver from AiXiz, think you might've seen it before. Little over 10mm wide by 22.5mm long. I was wondering if the M140 that Mr. DTR sells would be able to work with it, or if the laser would burn it out.

The other thing I ask is, if I could solder these two and get them to work, was what kind of host and heatsink that you make would fit these two. It's a spring driver, and a linear one, so it's not like one of the nice button drivers I've seen on here...
 
You must log in or register to reply here.





Back
Top