jayrob Build Kits, Lenses, and Other Stuff Listed Here!

[olympus mons]

Hey Jaydob,
Can you powder coat of paint the magmlight hosts? If so what will that cost? I'm looking for either white or very pale baby blue for a build I'm doing.

 

[jayrob]

Hey Jaydob,
Can you powder coat of paint the magmlight hosts? If so what will that cost? I'm looking for either white or very pale baby blue for a build I'm doing.

Sorry I never got into powder coating...

Open a thread to ask about it in the 'Experiments and Modifications' forum and I'm sure there are some here that are experienced at powder coat...

 

[Geddye]

I'm a new guy here. I'm interested in purchasing the Phaser host kit. can you send me pricing and info on that please?

 

[jayrob]

I'm a new guy here. I'm interested in purchasing the Phaser host kit. can you send me pricing and info on that please?

Sure I'll send a PM with the whole spiel and eye protection information too...

 

[Jude the Dude]

Yes...

Send me a PM! :beer:

Hi there! I am quite new to powerful lasers, and although I've owned a few 10mw s in the past, I don't have much real experience in DIY lasers. I have decided to try and build Styropro's 160mw pen laser build, and I was told to come here and buy the chrome leadlight pen host off of you. Firstly, I would like to request some pricing info if you are still selling this host, and secondly, I was just hoping for some advice on the components for styropro's build. I am planning to order the Osram PL450B diode in copper module from DTR's laser shop, and I was wondering if you could recommend a suitable driver - as I can't seem to find the Microboost Drive online... Also, he did mention that he changed the current to 280mA - so it would have to be pot changeable. Also, what is the switchboard, and does your pen host come with one?

 

[jayrob]

Hi there! I am quite new to powerful lasers, and although I've owned a few 10mw s in the past, I don't have much real experience in DIY lasers. I have decided to try and build Styropro's 160mw pen laser build, and I was told to come here and buy the chrome leadlight pen host off of you. Firstly, I would like to request some pricing info if you are still selling this host, and secondly, I was just hoping for some advice on the components for styropro's build. I am planning to order the Osram PL450B diode in copper module from DTR's laser shop, and I was wondering if you could recommend a suitable driver - as I can't seem to find the Microboost Drive online... Also, he did mention that he changed the current to 280mA - so it would have to be pot changeable. Also, what is the switchboard, and does your pen host come with one?

Sorry I don't sell the pens any longer but you can possibly get one from here: Creative Technology Lasers - Your source for diode lasers and laser modules at green, red and other wavelengths. (he was the supplier I got the pens from)

He also has the switch board shown in this thread which has good information for building:
http://laserpointerforums.com/f64/fs-new-pen-host-kits-switch-board-spring-option-nice-22561.html

DTR has options for driver included in his modules for an easy build. Just need a host for the module... (just need to know from DTR what battery supply is needed for which ever driver/diode combination you get)

 

[Jude the Dude]

Sorry I don't sell the pens any longer but you can possibly get one from here: Creative Technology Lasers - Your source for diode lasers and laser modules at green, red and other wavelengths. (he was the supplier I got the pens from)

He also has the switch board shown in this thread which has good information for building:
http://laserpointerforums.com/f64/fs-new-pen-host-kits-switch-board-spring-option-nice-22561.html

DTR has options for driver included in his modules for an easy build. Just need a host for the module... (just need to know from DTR what battery supply is needed for which ever driver/diode combination you get)

Hi again! Thanks for your reply, I think I've instantly learnt a lot more about the module housing. I was just wondering if you stocked any new hosts that I could put the parts of this laser

 

[Jude the Dude]

Sorry I don't sell the pens any longer but you can possibly get one from here: Creative Technology Lasers - Your source for diode lasers and laser modules at green, red and other wavelengths. (he was the supplier I got the pens from)

He also has the switch board shown in this thread which has good information for building:
http://laserpointerforums.com/f64/fs-new-pen-host-kits-switch-board-spring-option-nice-22561.html

DTR has options for driver included in his modules for an easy build. Just need a host for the module... (just need to know from DTR what battery supply is needed for which ever driver/diode combination you get)

Hi again! Thanks for your reply, I think I've instantly learnt a lot more about the module housing. I was just wondering if you stocked any new hosts that I could put the parts of this laser in to? Like, do you have any new pen hosts available for sale?

 

[jayrob]

Hi again! Thanks for your reply, I think I've instantly learnt a lot more about the module housing. I was just wondering if you stocked any new hosts that I could put the parts of this laser

My stuff is listed on the first page of this thread...

Just send me a PM! :beer:

Don't forget the safety glasses...

 

[BobMc]

Hello, my name is BobMc and I'm new to this forum. Would like to talk to you about your pocket mini kit. This would be my first built so I would want a hot kit . Seeing how I never built a laser before and have chubby fingers was hopeing you could complete all you can and than instruct me on the rest?was looking at a 445 with a black host. Thanks for your time😊

 

[jayrob]

Hello, my name is BobMc and I'm new to this forum. Would like to talk to you about your pocket mini kit. This would be my first built so I would want a hot kit . Seeing how I never built a laser before and have chubby fingers was hopeing you could complete all you can and than instruct me on the rest?was looking at a 445 with a black host. Thanks for your time😊

Hi BobMc,

Welcome to LPF! :beer:

Let me recommend an easier assembly kit:
http://laserpointerforums.com/f64/fs-18650-build-kit-easy-assembly-445nm-blu-ray-red-43857.html

Send me a PM and I can point you in the direction of the diode/module to get, and remind you of proper eye protection...

 

[BossH0g]

I have a 6W NUBM44 450nm Laser Diode In Copper Module W/Leads & G-2 Glass Lens, 4.5A Super X-Drive Laser Driver, and a blue 2 cell mag light. I wold like to order an aluminum heat sink( fancy one) from you. What type of payments do you take?
BTW, im trying to build a 6w laser

 

[jayrob]

I have a 6W NUBM44 450nm Laser Diode In Copper Module W/Leads & G-2 Glass Lens, 4.5A Super X-Drive Laser Driver, and a blue 2 cell mag light. I wold like to order an aluminum heat sink( fancy one) from you. What type of payments do you take?
BTW, im trying to build a 6w laser

I'll send you a PM... :beer:

 

[Playaussie]

Hello jayrob, i am building a 6W laser atm diode etc bought from DTR site:
NUBM44 450nm Laser Diode
In 12mm Copper Module
W/SXD Driver &
G-2 Lens
I will most likely be putting it into the RL-2088 and heard you make the heatsinks for that model? also i am open to other suggestions if you have a better host in mind to fit it into?

 

[jayrob]

Hello jayrob, i am building a 6W laser atm diode etc bought from DTR site:
NUBM44 450nm Laser Diode
In 12mm Copper Module
W/SXD Driver &
G-2 Lens
I will most likely be putting it into the RL-2088 and heard you make the heatsinks for that model? also i am open to other suggestions if you have a better host in mind to fit it into?

At that power large battery/large heatsink is recommended...

Take a look at my Mag kit. There are many options with the kit depending on whether you want a single battery vs a 2 cell build but if you already have the driver (guessing you have an SXD buck driver), then you will need a 2 cell build.

See here:
http://laserpointerforums.com/f64/f...exmodp3-side-button-forward-clicky-57278.html

Send me a PM! :beer: