Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

GB#1 COMPLETED! JETLASERS;)-DELIVERED-WOW!-250 mWs OVERSPEC average+100mWs

Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

Thanks CohR-- for all others- if you want to, you can wait till I email your LMP photo- it will not slow down the time til you get it- if you sent more than the laser GB cost (either 265$ or 325$) just subtract any shipping you sent with your PP from $24.64. If you sent the laser cost only you will need to send me the full $24.64.

If confused at all PM me and I will look at my PP acct. and tell you the amt. for final shipping.

Sorry this is taking a little longer than i predicted- I DO appreciate everyone being so understanding. I will look thru my box of laser stuff and follow the LPF tradition of adding some surprize goodies to our packages.

to those who may have never seen a PGL like these. They are heavy and bit too big to put in your shirt pocket, and if its is in your pants pocket you may get asked-- ' Is that a big laser in your pocket, or are you just happy to se me'?

I plan to NOT let mine get passed around to others who may do anything I would not do and carry it in a holster that should keep it safe.

I have made a shortened version of the tailcap interlock pin for everybody that you can just leave in there, just keep in mind that that will make it somewhat less safe in the hands of children and adult idiots. Also the blue LED 'on' light is pretty bright and you may want to figure a way to partially cover it to lessen its brightness a little. A little piece of black duct tape with a tiny hole may be the solution.

JETLASERS says a 3 min on tiime is OK with a 1 min rest cycle. It mya be able to run much longer but I personally do not plan to push that.

Check here for any newz I get from Gray--Len
 





Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

yay i can't wait for this to come in :D

Thanks a ton :D
Hi Udanis,
Thanks a ton for being understanding and sorry for the once-and-again delay:( and now the worst arrival date is the end of this month and we do everything we could to make up for this delay. :yabbem:

Prototype said:
^Now that is some excellent customer service. I think JetLasers has a very bright future at LPF.
Thanks Proto for always being supportive there. No matter what goes after GB1, getting every laser in GB1 shipped out and received counts more. Shame on us if we delay it any further. :yabbem:Thanks.

I'm in no hurry!! Thanks for everything! :beer:
Thanks Apr20vturbo! I'm in hurrier and called our machinist twice every day and hope we are all not waiting any further since it's been long enough since Hak started this GB.:yh:

hakzaw1 said:
Sorry this is taking a little longer than i predicted- I DO appreciate everyone being so understanding. I will look thru my box of laser stuff and follow the LPF tradition of adding some surprize goodies to our packages.

Thanks a ton for all the help, Len. Yes, it takes longer than we all expected and the tolerance and understanding of every man is much appreciated and means a lot to us. Deep apology to Hak and everyone here.

I know simply 'sorry' doesnot help, so even if the hosts are delayed again to this Wednesday, let Jetlasers get the lasers assembled in one day(I guess to assemble 50pcs or so per day is no problem since everything except hosts are prepared.) and get them all shipped out from the nearest UPS/DHL rather than HK UPS we usually go with. So the lasers can arrive at US before the end of this month. I guess Hak will also immediately get the lasers shipped out to each after he added the pin or LPM photo(thanks again).

To make up for the intolerable delay, any suggestion such as free shipping(this or next time), free goggles or other stuff, upgraded(200mw to 250mw?) and the like would be considered and Len can also give us some advice at this. :)

Anyway, thanks a lot for everyone's patience and understanding and don't worry too much. :beer:
 
Last edited:
Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

The box with the eyeware and stands arrived today-- very happy with everything!!

Everybody gets glasses or goggles and the first four who paid get the stands too-

so that leaves Arythna and Bill and me out but thats fine.-- heres some thing to look at while we twiddle our thumbs... Gray=-- we understand and are cool buddy-- No Worries--- thanks for the offers on the next GB - I am sure some will enjoy an upgrade on a titanium--

glasses test great on my Ken-o-lite- stands are extremely well-made- they will like them for sure.

Cheers ( and Cheer-up) ;) hak
 

Attachments

  • GRAY Freebies LPM test 001.jpg
    GRAY Freebies LPM test 001.jpg
    63.5 KB · Views: 78
  • GRAY Freebies LPM test 002.jpg
    GRAY Freebies LPM test 002.jpg
    75.9 KB · Views: 70
  • GRAY Freebies LPM test 004.jpg
    GRAY Freebies LPM test 004.jpg
    57.8 KB · Views: 71
  • GRAY Freebies LPM test 005.jpg
    GRAY Freebies LPM test 005.jpg
    58 KB · Views: 72
  • GRAY Freebies LPM test 007.jpg
    GRAY Freebies LPM test 007.jpg
    51.9 KB · Views: 68
  • GRAY Freebies LPM test 012.jpg
    GRAY Freebies LPM test 012.jpg
    61.9 KB · Views: 78
  • GRAY LPM test.jpg
    GRAY LPM test.jpg
    49.4 KB · Views: 67
  • GRAY Freebies LPM test 019.jpg
    GRAY Freebies LPM test 019.jpg
    56.6 KB · Views: 74
Last edited:
Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

Shame on us if we delay it any further. :yabbem:Thanks.

No shame to be had, you're being upfront about any delays and communicating well, I think everyone prefers that to just a stolid silence.
 
Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

Here is the shot w/ the glasses in between my 25mW Dino Direct green and my LPM- so it knocks it down to 4mWs- my meter does not 'zero' it starts at -2mWs- - then 27(25)mWs with the laser on and then down to 2mWs with the glasses.
 

Attachments

  • GRAY Freebies LPM test 020.jpg
    GRAY Freebies LPM test 020.jpg
    58.9 KB · Views: 67
  • GRAY Freebies LPM test 016.jpg
    GRAY Freebies LPM test 016.jpg
    54.8 KB · Views: 65
  • GRAY Freebies LPM test 015.jpg
    GRAY Freebies LPM test 015.jpg
    57.7 KB · Views: 71
  • GRAY Freebies LPM test 006.jpg
    GRAY Freebies LPM test 006.jpg
    53.4 KB · Views: 69
Last edited:
Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

Yeah that is probably not going to happen. He is getting the hosts on 18th, figure 3 days for assembly? We are up to the 21st. 6 days for shipping to Len. We are up to the 27th. That's getting close.

Then again he could assemble them all in one days and shipping to the us could take 5 days.

Well, I sure would like to get mine by October 29th at the latest. We'll just have to wait and see...


Udanis -- 'Oh ye of little faith" -

-- looking like Frontstone MAY have his on time as Gray and I have figured a way to make it happen a day or two quicker than the rest of you.

One more example of Gray/JETLASERS dedication to excellant customer service- +rep to Gray


for the rest--depending upon the time of day that DHL deliveries-- I may be able to send out the same day. However I live out in the 'toolies' and we are at the end of the route for most carriers-- the glasses/goggle/stands box came at 6 pm. I will share the tracking number via email & PM with you all and you can be on-line to see your LPM photos ASAP-

IF, for whatever reason- you would rather have the purchase price of the laser refunded just let me know- I have a few waiting in the wings who missed out on the GB and they will take it.

------------------------& just to make you smile-------------

Stay tuned to this station for new developments-
may not be suitable for younger viewers-
your mileage may vary-
void where prohibited.
prohibited where voided.

T,T&L extra

If a 3rection lasts more than 4 hours call a hooker.( See-Alice)

hk
 
Last edited:
Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

So does this mean they came in? :D
 
Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

Well, yeah, I want to know that. Did they arrive? We don't have to worry about customs anymore? :P (Hopeful...)
 
Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

Hey Udanis and Aryntha, i know waiting is not refreshing. The lasers are not arrived Sorry. They were just shipped out to another shipping agent yesterday since the local DHL/UPS agent in Jinan were not at work on sunday. Then the laser will be shipped out of China very soon and so let's be prepared that it would arrive at US around 29th. I will get the tracking info very soon. :)

The overspec god is not always showing his presence :can:but we did upgraded two PL-C 200mw while for PL-C 250mw, there's also some decent overspec. As we owe such a lot of portables to people at home and abroad, so Jetlasers kinda rushed a lot. I will also get the testing results. Certainly Hak will also test them on his part if the time permits. Decent over spec will be still there.

The new hosts look better than the previous 2010 PL-C ones. I believe Hak and cd520 know this better since they've seen the previous version.
Talk to you later and have a nice day!! Thanks to all!!!
Special thanks to Hak who's been such a big help!!!
 
Last edited:
Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

we did upgraded two PL-C 200mw while for PL-C 250mw

So does this mean aryntha and I got 250's? I think we were the only two to order 200mw models.

Thanks for keeping us updated.

-Udanis
 
Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

And my laser? The PL-C >600mw 532nm? Its not from GB because I'm not from US. You told me as soon the GB shipped you would ship mine

Cheers
 
Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

And my laser? The PL-C >600mw 532nm? Its not from GB because I'm not from US. You told me as soon the GB shipped you would ship mine

Cheers
Hey Regina,
I didnot think you're a lady. Cool.:)
Yes, we're preparing for your PL-C 600mw green laser now. Yes, it'll shipped out as soon as it's available. Will keep you updated and also post delays if any encounters. Keep eyes on the email box and keep in touch there.
 
Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

Hey guys, a quick note. I finally received the shipping agent's call and the DHL's tracking info is deleted. We shift it to mainland shipping agent other than HK agents this time, thus it goes from north China here.

Hope it flies....Praying now all goes well until Hak receives it.

Think of this as a test to see about delivery.
Sorry for any delay and Thanks again!!! :beer:

PS: The PL-C 250MW package of Frontstone was shipped out separately one day earlier and hope it arrives earlier as well, certainly before 29th, this month.:beer:

< Moderator's note -- Although I do not really see a problem with it, enough of you were worried that I edited the number out. >
 
Last edited:
Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

I won´t make the tracking number official here!
You never know..............
 
Re: GB#1 IS CLOSED!! JETLASERS THEY ARE ON THE WAY!! 250 mWs all overspec free ext

and the one for COSMICFLUX (oliver)??
:wave::thanks:
 
Re: GB#1 IS CLOSED!! JETLASERS 200&250 mWs ordered all overspec and free extras

I won´t make the tracking number official here!
You never know..............
I think DJNY means 'wouldn't' rather than 'won't' and I AGREE with him- plz dele the track # Gray, I have sent it out to all who need to see it.
 


Back
Top