- Joined
- Oct 3, 2011
- Messages
- 899
- Points
- 0
Re: Free: "Wandering box of laser junk" USA only
Funny, I was thinking the same thing. Keep the same box and use a clear plastic window on the top that would allow a mailing address to be written on a piece of paper and slipped under the window. I have already started to fashion the box. I have a few brand new box flats I picked up from the PO a few months ago and took one of the large flat rate (12x12x6) boxes and used glue to fasten the bottom together good and tight. I went around the inside seams with some thick 3" wide packing tape and sealed the bottom completely off so small parts would slip through any cracks or get caught and lost in the seams and flaps of the box. It's amazing how strong a little Elmer's glue will make one of this boxes. I've also got some 1/4" foam padding I was thinking of lining the entire inside with. I've got some clear thick plastic sheets (like were used on old overhead projectors to write on) I used to construct a 5x8 inch window that's framed in with some thin cardboard. It has an opening on the side with a flap that you tuck under the edge that allows you to slide a piece of paper with the address into the window. I'm really proud of this box now, best damn box I've ever built. I think it would be totally cool for everyone to autograph the outside in a different color Sharpie. So even when I get the box back at slot 21 and it's full of pop tops and gum wrappers I will at least have a piece of original art with everyone's autograph on it. I may even deconstruct it and frame it as wall art. I'm so tired I'm just starting to sound silly now....well, maybe not to silly, need to think about it tomorrow when I've had a full 3.5hrs of sleep.
No way Livingloud, I'm not sending you some scrawny medium flat rate plain jane box. Your gonna get the best box you've ever seen. Since you seem to have a bunch of stuff you want to put in and not much desire to remove, I may leave a little extra space in it for you. You might want to PM me about any non-laser related stuff you could use so I could put some filler inside for you to keep and make your room. I've got all sorts of audio related HiFi stuff, gun accessories, reloading supplies, exotic wood pieces, bars and plates of aluminum and copper, Q-tips, and Depends diapers. Let me know, especially about the latter.
Goodnight!
Funny, I was thinking the same thing. Keep the same box and use a clear plastic window on the top that would allow a mailing address to be written on a piece of paper and slipped under the window. I have already started to fashion the box. I have a few brand new box flats I picked up from the PO a few months ago and took one of the large flat rate (12x12x6) boxes and used glue to fasten the bottom together good and tight. I went around the inside seams with some thick 3" wide packing tape and sealed the bottom completely off so small parts would slip through any cracks or get caught and lost in the seams and flaps of the box. It's amazing how strong a little Elmer's glue will make one of this boxes. I've also got some 1/4" foam padding I was thinking of lining the entire inside with. I've got some clear thick plastic sheets (like were used on old overhead projectors to write on) I used to construct a 5x8 inch window that's framed in with some thin cardboard. It has an opening on the side with a flap that you tuck under the edge that allows you to slide a piece of paper with the address into the window. I'm really proud of this box now, best damn box I've ever built. I think it would be totally cool for everyone to autograph the outside in a different color Sharpie. So even when I get the box back at slot 21 and it's full of pop tops and gum wrappers I will at least have a piece of original art with everyone's autograph on it. I may even deconstruct it and frame it as wall art. I'm so tired I'm just starting to sound silly now....well, maybe not to silly, need to think about it tomorrow when I've had a full 3.5hrs of sleep.
No way Livingloud, I'm not sending you some scrawny medium flat rate plain jane box. Your gonna get the best box you've ever seen. Since you seem to have a bunch of stuff you want to put in and not much desire to remove, I may leave a little extra space in it for you. You might want to PM me about any non-laser related stuff you could use so I could put some filler inside for you to keep and make your room. I've got all sorts of audio related HiFi stuff, gun accessories, reloading supplies, exotic wood pieces, bars and plates of aluminum and copper, Q-tips, and Depends diapers. Let me know, especially about the latter.
Goodnight!