Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

*445nm lasers* !GB-Closed!






Re: *445nm lasers* !arrays 550$ and diodes 35$!

psi seeker 34 said:
last I knew diodes weren't sensitive to static electricity.
I for one have never seen any type of diode packaged in any kind of static shielding
including LEDs, then again, I could be wrong, after all, I haven't seen any laser diodes (other than those in CD players) at radio shack .
Click to expand...

Diodes in general might not be susceptible to ESD, but LASER diodes are very susceptible. I've had way too many lasers die from ESD. RIP little diodes :cryyy:


Silvershot said:
I second that.
Click to expand...

I do too. You've done a great job kiyoukan.
 
Re: *445nm lasers* !arrays 550$ and diodes 35$!

LazyBeam said:
Put foil over foam. Poke diodes to foam through foil.
Foil will ground static charge. Foam holds diode & foil.
Click to expand...

That is not a guaranteed good contact... you would be better to solder
the 2 LD wires together or use a PCB shorting block...

psi seeker 34 said:
last I knew diodes weren't sensitive to static electricity.
I for one have never seen any type of diode packaged in any kind of static shielding
including LEDs, then again, I could be wrong, after all, I haven't seen any laser diodes (other than those in CD players) at radio shack .
Click to expand...

I think it's time to do a little research and reading on the Forum...
because you ARE completely wrong... Laser Diodes ARE extremely
sensitive to ESD...


Jerry
 
Last edited:
Re: *445nm lasers* !arrays 550$ and diodes 35$!

Paid as promised Kiyoukan aka A. B.

Yeah find out if you can just cut the ribbon cables ... as I was told they are just screwed in place.
 
Re: *445nm lasers* !arrays 550$ and diodes 35$!

How does Glenn ship his diodes? I'm sure whatever way you end up packaging them will be fine kiyoukan.
 
Re: *445nm lasers* !arrays 550$ and diodes 35$!

So it it past 9:00PM on Wednesday June 23 2010....
Has the order been placed as was quoted.... :thinking:

OR

are we still being held up by the members that have
not paid yet...:thinking:

Jerry
 
Re: *445nm lasers* !arrays 550$ and diodes 35$!

lasersbee said:
So it it past 9:00PM on Wednesday June 23 2010....
Has the order been placed as was quoted.... :thinking:
OR
are we still being held up by the members that have
not paid yet...:thinking:
Jerry
Click to expand...

I think he is hoping/waiting for Andy_Con (2 arrays)

Peace,
dave
 
Re: *445nm lasers* !arrays 550$ and diodes 35$!

Is Andy_Con responding to his PMs? He appears to be online almost all the time.
 
Re: *445nm lasers* !arrays 550$ and diodes 35$!

i have had no contact from andy_con and yes i am waiting till he contacts me i sent him pms over lpf pl and his email still waiting.
just got his email he still wants them awaiting payment
 
Re: *445nm lasers* !arrays 550$ and diodes 35$!

Yeah Dave... I PMed Andy_Con early this afternoon and saw that
he was on the Forum at 6:02PM... But no reply or payment
to kiyoukan... Don't know why he seems to be hiding...:thinking:

I'm sure kiyoukan is doing his best to keep the deadline...:cool:


Jerry
 
Re: *445nm lasers* !arrays 550$ and diodes 35$!

I suppose these things could easily be labeled as 'replacement projector lamps' on any customs forms, since that is their intended purpose after all.

Putting on 'this will set your house on fire - class IV' would probably not be the best of ideas ;p
 
Re: *445nm lasers* !arrays 550$ and diodes 35$!

From C_Jay....

Yeah find out if you can just cut the ribbon cables ... as I was told they are just screwed in place. end quote



The array is in several parts.
Small screws hold them together.
There is a bit of thermal compound to deal with.

The ribbon must be almost totally clipped away in order to push the diode out. Or the solder carefully heated with your iron and wicked or sucked away to release the ribbon. The ribbon can melt, part from the diode without fully releasing and leave you with very little to pull on. Takes longer than I expected. I imagine the second time around it would be easier.

Hope this helps---hak

IMO all this needs to be done of course following all proper ESD precautions.
 
Last edited:
Re: *445nm lasers* !arrays 550$ and diodes 35$!

hakzaw1 said:
The array is in several parts.
Small screws hold them together.
There is a bit of thermal compound to deal with.

The ribbon must be almost totally clipped away in order to push the diode out. Or the solder carefully heated with your iron and wicked or sucked away to release the ribbon. The ribbon can melt, part from the diode without fully releasing and leave you with very little to pull on. Takes longer than I expected. I imagine the second time around it would be easier.

Hope this helps---hak

IMO all this needs to be done of course following all proper ESD precautions.
Click to expand...

NO HEAT! Let them burn up their diode for themselves :tinfoil:

Peace,
dave
 
Re: *445nm lasers* !arrays 550$ and diodes 35$!

Thanks for the info Hak. Where exactly is the thermal compound located?
 
You must log in or register to reply here.


Back
Top