LPF Site Supporter
- Jun 24, 2010
Yea had a hard time holding the calipers and taking the picture but it is basically 35.00mm exactly. Yea you can boar exactly 35.00mm and press it in or every so slightly oversize by maybe 0.05mm to get a perfect fit and use a set screw.Big improvement. :gj:
@ Pman, host will just need a 35mm hole rather a 12mm hole.
I really like the driver mount with 2 screws, that makes it worth it right there.
@ DTR: I'm going to order a 35mm drill bit, or should it be 36 or possibly 34?
Wow a 35mm I.D. 1/4 thick aluminum tube and make a spring board mount and a battery spacer, these could be fun.
35mm is exactly 1 3/8 That means off the rack thick wall tubing should work.
Yea they will be perfect for anyone that wants to make a custom host that has a 35mm hole with set screw at the top. The main idea is it is a module so it will fit a heatsink fit for a 35mm module like the XYZ units but I like the idea of a custom host for them.Understand that RED I want to know the information like badboy is looking for. A direct plop it in host Not interested in a $100 host unless it is more like what Ehg would build to make it fit.
I also have 20mm and 25mm modules being made at the moment as well.:beer: