Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

12mm Copper 3.8mm 5.6mm and 9mm Aixiz replacement modules

MODc's should be done this weekend, waiting on those teenie taps...

Here's a little teaser, the way I tried to make the driver sinks didn't work so I have to start over. I salvaged what I had left and made these. They hug the diode and back side of the module getting as much surface area of the diode in contact with the heatsink as possible. These would be perfect for builds that can't use the entire back half of the aixiz module. The entire assembly is just 1/2" long.

IMG_20110906_230504.jpg


IMG_20110906_235745.jpg


I've run that guy as it sits now for 1 minute+ on a maxed groove driver. It only gets moderately warm :shhh:
 





Hmm, now I want some of those too. I used the first of my modules in a pocket mini build, with copper heatsink and a penny heatsinked flexdrive set at 1.16W and thermal glued to the pill.

1 1/2 minutes in and it starts to get a little warm. :)
 
Last edited:
I really want some of these as I bet they are great at dispersing heat and probably enable your 445 to have pretty good run times :eg: I might get 10 or so once I save up some money as they would be a nice quality product to keep around in my little laser workshop!
 
Hey Pontiac,

Any news on this front? I've got a couple C-Mounts that I'm dying to mount :)

Cheers
 
Hey Pontiac, I would like to order 4 of your 5.6mm Copper Aixiz replacement modules please:)! Did you get my PM? Thanks,
 
What (if any?) of these sizes are actually available?

I have use for both 3.8mm and C Mount.
 
Pontiac is always very very very hard to get ahold of via pm, unless mine don't go through..
 
Yeah, I get a lot of PM's and I don't usually have time to answer them all. I usually try to weed through to the important ones but I miss stuff sometime.

Right now I have 3.8mm modules and 9mm modules. I'm sold out of 5.6 modules and still don't have the c-mount version finished yet. I should have more (and the c-mounts) by next weekend.
 
Pontiacg5 said:
Yeah, I get a lot of PM's and I don't usually have time to answer them all. I usually try to weed through to the important ones but I miss stuff sometime.

Right now I have 3.8mm modules and 9mm modules. I'm sold out of 5.6 modules and still don't have the c-mount version finished yet. I should have more (and the c-mounts) by next weekend.
Click to expand...

That's great news. How do I go about purchasing the 3.8mm modules? Is there a paypal link?
 
Just send me a PM with how many you need and an e-mail address and I'll have google checkout send you a payment link.
 
Hi. Pontiacg5.:yh:

I'd like to get 3 of 9mm Aixiz if available.
I live in Korea and google checkout is not avalable here.
I can PP you.

PM me please.

SHIN
 
Last edited:
Let us know when the c-mounts are ready.

High on the list (from when rhd was going to do them) and Still looking to get a couple.
 
Last edited:
Did you receive my PM? I am looking forward to buying some 3.8mm modules off of you...I have two 3.8mm laser diodes (457nm and 640nm) that are begging me to put them to use. :D
 
styropyro said:
Did you receive my PM? I am looking forward to buying some 3.8mm modules off of you...I have two 3.8mm laser diodes (457nm and 640nm) that are begging me to put them to use. :D
Click to expand...

Out of curiosity, did you harvest a pico projector? If not, what's the 457 ?

I lost the OSRAM blue from mine, but I have another on order from O-Like.
 
Yes, I harvested the sled but I don't have any modules to put mine in. I can't wait to see what it's like, I plan on putting mine in a pen host.
 
You must log in or register to reply here.





Back
Top