Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

How to Register on LPF | LPF Donations

Wicked lasers designing a LPM

bobhaha

bobhaha

0
Joined
May 31, 2009
Messages
3,239
Points
63
I know they have said in the past that they are gonna be selling LPMs, but this is looking more promising...

202296_10151238017579115_1380908519_o.jpg


Oh wicked lasers.... you so stupid.

338739_10151240726854115_205141267_o.jpg


I'm not sure if its a thermopile... but that design with the thermopile inside the case seems like its gonna give inaccurate results.

But if it was an optical sensor... That might mean that only low power lasers can be metered... which kinda works out nicely for them, but is pretty much retarded if they wanted to sell large quantities of them.

-Adrian
 
Last edited:





I'm wondering if those 4 pads on the left side are for USB connections for data logging and stuff :D
 
If that top view of the PCB is anything to go by, it's not USB. But there could (and probably is) more circuitry on the underside.
 
If they are anything like i've heard from most people on here, seems that they may try to use this as a gimick (using a purposely miscalibrated lpm to show higher powers and if someone teets it with another lpm and gets lower results they can claim that the person's lpm is miscalibrated/wrong)
 
Last edited:
One would think that WL is shooting themselves in the foot with this one.. I mean, half their lasers are somewhat underspec, right? Now their customers will know too.
 
dpup5520 said:
If they are anything like i've heard from most people on here, seems that they may try to use this as a gimick (using a purposely miscalibrated lpm to show higher powers and if someone teets it with another lpm and gets lower results they can claim that the person's lpm is miscalibrated/wrong)
Click to expand...

I was thinking something very much along the same lines...Finally we might start seeing some 1 W Kryptons and Arctics! ;)
 
Grix said:
One would think that WL is shooting themselves in the foot with this one.. I mean, half their lasers are somewhat underspec, right? Now their customers will know too.
Click to expand...

That was my exact thought too...

Anyway, these could possibly be good to hack and improve on which would be cool.... But knowing Wicked lasers... the LPM will probs cost $1000+
 
It seems like on optical LPM to me as well...

On this WL page they let the cat out of the bag I think...

Troubleshooting

How do I know that my handheld laser is delivering its full advertised power?
Measuring the output of a portable handheld laser is relatively easy. We use a Coherent LaserCheck Power meter, along with other laboratory equipment, to ensure that laser output is what we say it is. If you would like to check for yourself, you can obtain a Pocket Laser Power Meter from websites such as eBay. You can also visually compare our laser modules to a >5mW green laser pointer to see the dramatic difference
​
Click to expand...
They must have hired a guy in Austin Texas to try and
reverse engineer their in house Coherent LC LPM...

@ Bobhaha...
Do you have a link to where you found that info on the 1st post...


Jerry

You can contact us at any time on our Website: J.BAUER Electronics
 
Last edited:
Grix said:
One would think that WL is shooting themselves in the foot with this one.. I mean, half their lasers are somewhat underspec, right? Now their customers will know too.
Click to expand...

That, OR they're making these so that they give readings much higher than what is truely being measured and they make their lasers look that much better.
 
Gryphon said:
That, OR they're making these so that they give readings much higher than what is truely being measured and they make their lasers look that much better.
Click to expand...

I am thinking the EXACT same thing, the arctics will show at 1W but when measured on a calibrated meter it will be closer to 600-800mw, imagine of
The output of that meter was just x2'd so a 500mw arctic is 1000mw :eek:
 
AnthoT said:
I am thinking the EXACT same thing, the arctics will show at 1W but when measured on a calibrated meter it will be closer to 600-800mw, imagine of
The output of that meter was just x2'd so a 500mw arctic is 1000mw :eek:
Click to expand...

That would not be a problem as this will become known to everybody..

Greetings,,
 
It most likely connects to the headphone port of an iPhone or android phone for mobile graphing.
 
Yeah but then they'd have to get the app approved in the app store & all that fiasco :p they'd probably charge for the App aswell :(

Although mobile graphing sounds cool.
 
Yeah, actually now that you mention it spyrorocks, that cbmvmvmvmvmvnvbfvnvmvnvnvvm guy once said that's what they wanted to do.

AnthoT, it won't be hard at all for andriod.... apple on the other hand :/

Jerry from their facebook page.
 
Last edited:
bobhaha said:
Yeah, actually now that you mention it spyrorocks, that cbmvmvmvmvmvnvbfvnvmvnvnvvm guy once said that's what they wanted to do.

AnthoT, it won't be hard at all for andriod.... apple on the other hand :/

Jerry from their facebook page.
Click to expand...

Yeah, android is easy, apple will give them a hard time as usual :p
 
You must log in or register to reply here.


Back
Top