Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

!!UPDATE-CLOSED AND ALL SENT--Gb#2 jetlasers IS NOW ON>PM Gray w/request






Re: Gb#2 jetlasers feeler

DJNY said:
Was there a deal that ALL people who join/joined the GB with discounted lasers have to write a review? :thinking:
Click to expand...

Obviously not.

However inevitably most, if not all, will post a few pictures, if not a full review.

They'll at least drop a note saying that they're satisfied with the laser.

EDIT: 660 posts. Yet another milestone. The blood red we all know, love, and can't get enough of.

660nm_beam.jpg
 
Last edited:
Re: Gb#2 jetlasers feeler

Hi gonina, I agree with you. Yes, GB 2 is too early when GB1 is still on its payment stage and the items for GB2 are not confirmed yet. We can wait till every one receives his laser and decide if GB 2 is workable. Thanks.

Hey, DJNY, not everyone that joined the GB have to write any review and the discounted price can also be accessed by contacting Jetlasers directly ; but they will not have the free goggles and also need pay more for shipping from China. Jetlasers doesnot produce any goggles and buy them in bulk from goggles company. Afaik the cost per pair of goggles is 20-25$. The stand is much cheap, around 12$ in cost.

I will see if all ti laser pen samples have been aligned with a 532nm module and would be pleased to make a 635nm one for you. It might be a bit late than the GB units.

Another Friday evening now and i've got to have them get the lasers prepared and shipped out next week if possible. Hope for no delays that will not only keep you waiting but also make Hak's life harder.:yabbem:
 
Last edited:
Re: Gb#2 jetlasers feeler

Thank you Gray for clearing things up (:beer: for you)

It´s no problem if it is too late for putting the 635nm into the GB. But I hope to get it during October :cool:
 
Re: Gb#2 jetlasers feeler

Are the Ti pens available in this group buy then, Gray?
 
Re: Gb#2 jetlasers feeler

JETLASERS GB #1 is closed-

A thread on GB#2 has been started but will not close until some time in November. TBA.

I think there was ample time for all who wanted to get in on GB#1.

And no, anyone who gets a laser from GB #1 is free to do a review or not. I only ASKED that they do. Even a short review will be appreciated.

GB#2 is basically in the feeler stage but I am making a list of possible 'wanters' which has three or four on it ATM. No request for funds will be made for at least 3 weeks or more.

So it IS too late for this one and not too early for the next. Max of twenty & min of ten lasers.


DJNY^^^ you would have not been able to do GB#1 as I was not wanting to send out any to other than USA and Canada(due to customs and possible duty probs). Gray agreed weeks ago to handle other requests straight from JETLASERS and allow the same price but more to ship. All this was in my thread.


Obviously if GB#1 is not successful a second one may not happen but I dont think that will be the case .

Gray also tells me that future GBs may include 445nm and 12X 405nm lasers.

cheers all.............. Len
 
Re: Gb#2 jetlasers feeler

I will definetly be a part of the GB II. I been saving money lately.. cough cough crazy work shedule i have.
 
Re: Gb#2 jetlasers feeler

Hi, I am new here. May I know what is this Group Buy from Jet Lasers? I happened to locate this forum while browsing around Jetlasers website...

I am interested in one of their products, the PL-B models and the Dazzler. May I know is there any discount offer on this above mentioned 2 products?
 
Re: Gb#2 jetlasers feeler

Jaxz said:
Hi, I am new here. May I know what is this Group Buy from Jet Lasers? I happened to locate this forum while browsing around Jetlasers website...

I am interested in one of their products, the PL-B models and the Dazzler. May I know is there any discount offer on this above mentioned 2 products?
Click to expand...

Hey Jaxz, Thanks. I saw your email and just responded.

BTW, our apologies for the trouble and inconveniences Jetlasers has caused to everyone in GB1 due to the delayed arrival of the upgraded hosts and just hope the waiting worths the while. :)

Since the new hosts are more than enough for now, I believe any next GB for PL-C will not delay for such long.

Thanks again to everyone.
Stay warm in winters! !
 
Re: Gb#2 jetlasers feeler

I'm interested in GB#2. Assuming that the GB#1 units don't spontaneously combust or melt down, I will definitely take a PL-C 200mW 532nm with removable key in GB2 whenever it happens.
 
Re: Gb#2 jetlasers feeler

ivorykid said:
I'm interested in GB#2. Assuming that the GB#1 units don't spontaneously combust or melt down, I will definitely take a PL-C 200mW 532nm with removable key in GB2 whenever it happens.
Click to expand...
Hey, Ivorykid, you're late for GB1 but early for GB2.:D. Be patient and positive. It takes days of waiting. If you cannot wait, you can also PM or email me for more info. Thanks. :)
 
Last edited:
Re: Gb#2 jetlasers IS NOW ON>PM Gray w/request

GB#2 is NOW on-- see post #1--(OP)

PM Gray for your choice and quote-then PM(fwd the whole PM from Gray) that to me.

special requests(like key removable in the 'on' position) must be made in advance. It will be too late for alterations in the last week of this GB. You must get your own GB price from Gray.

Read GB#1 for most details about how this will be run. DO NOT PP me any $$$ until you are asked to do so. I feel that this one will hit the max of twenty units very fast so .'move your feet or lose your seat'!!

Send Gray your questions about the lasers and price- PM me for answers about the GB details. Update will be added to the OP(#1) so look there before you PM me .

TY

hak
 
Re: Gb#2 jetlasers IS NOW ON>PM Gray w/request

Just sent Gray a PM, really wanna get in on this GB. And it looks like a great timeline for me. If they have the ones I asked about I would love to be put down for one. And I will forward you all the information I get regarding them. BTW, thanks for hosting these GB's. It is a great way for some of us to get Lasers at a little less hurt on the pocketbook :D

EDIT-Gray confirmed everything and I sent you a PM, looking forward to this quite a bit.
 
Last edited:
Re: Gb#2 jetlasers IS NOW ON>PM Gray w/request

Subscribing. Just sent a PM to Jetlasers for a quote.
 
Re: Gb#2 jetlasers IS NOW ON>PM Gray w/request

wannaburnstuff said:
Just sent Gray a PM, really wanna get in on this GB. And it looks like a great timeline for me. If they have the ones I asked about I would love to be put down for one. And I will forward you all the information I get regarding them. BTW, thanks for hosting these GB's. It is a great way for some of us to get Lasers at a little less hurt on the pocketbook :D

EDIT-Gray confirmed everything and I sent you a PM, looking forward to this quite a bit.
Click to expand...

Boosted240 said:
Subscribing. Just sent a PM to Jetlasers for a quote.
Click to expand...
THANKS Guys
added you both to the not-binding list -- if you are sure of your choice and get a price from Gray I will add that as well- The ones that I sent out today were SCHWEET!!!!

I'm making some beam shots later tonite and will post them here. There will be 5 new 250mWs in thier new owners hands in a few days so watch the review section for thier posts. These are NOT toys. You will not be disappointed. You will NOT find a better new Warranteed Professional PGL with these features and 50+ mWs overspec at this price. Total for these was, with all shipping about $350- thats around 1$ per mW. And that is IR filtered, of course.

T.Y. Gray and T.Y. to all who put thier faith in me.

Len
 
Re: Gb#2 jetlasers IS NOW ON>PM Gray w/request

DEFINITELY excited about this! This will be my first quality laser. Gotta love Rayfoss and their over the top customer service, but I think it is about time to get serious and get one of these high quality products while I have the opportunity.
 
You must log in or register to reply here.


Back
Top