Hey Guys,
For anyone that is Curious i took a picture of 3 different power 650nm Diodes.
In the Picture bellow from left to right is:
500mW - 1000mW - These diodes
500mW 650nm C-Mount Vs this diode:
1W 650nm C-Mount VS this diode:
As you can see No comparison to cheap reproductions.
Some might not know but in china they do make alot of Knock off laser diodes. There is nothing wrong with that and most of the time the function just fine but are UN reliable. I bought 6 of the 500mW 650nm diodes. Spec sheet said MAX 1.5A and 4 popped before 1.1A However when chilled this diodes where able to hit ~ 800mW-1W OK However man the beam is Ugly. Its much larger then the diodes i show in this thread. I keeped the other 2 to use.
Same for the 1W diode. I was surprise to see that the 500mW has 6 bond wire and the 1W has only 3. But the die is bigger so yeah. Beam is a little worse then the 500mW diode. The Max Currant for the 1W was 1.5A Oswell. So yea dint sound right.
One big issue i found was the FAC where terrible The size of the FAC was not properly matched to the size of the die.
I remember this was extremely important when talking with the guy that did our Mitsubishi G71 638nm diodes. He first put on a Thin "For simple terms" FAC and it was Not correcting the beam that well and then moved to a thicker one and made a big difference.
Whatever FAC is put on these 5W 650nm diodes is dead perfect for the die. I cant believe the beam next to the 500mW 650nm diode.
Anyway, Just wanted to show the big diffrence in the die quility and the overall diode.
Ill take much nicer shots tomorrow when i get up of just the 5W diode.
Iam tired going to bed soon. 4am
PLEASE NOTE: Iam sure there is more then just these 2 500mW and 1W 650nm diodes available but these where purchase from ebay and china sellers so pretty much this is what you see floating around but not limited to just this.