SOLD.!!! 2W 445nm Laser in a Z5 Host

[lazeerer]

SOLD.!!!





Hi All,



For Sale: is a "2W" 445nm Laser In a Custom Z5 Host.:eg:



The Laser Runs off 2x 18650 for long run time in between charges and Uses a G1 Lens with a Custom Focusing Ring that has a Nice Smooth look to it. The Head of the laser has Nice Fin's all around the head and Heat dissipation fin's to wards the bottom. That combined with the Aluminum heatsinks inside the head makes Great for keeping the diode cool. THe Custom Lens Focusing ring also adds to the Heatsink.


This Host is on of my Person favorite.



Here Is What You Get:

1x 2W 445nm laser in custom Z5 Host. "LPM Tested with Power Guaranteed"
1x 405/445-G-1 Lens
1x Custom Focusing Adapter
2x Protected 2400mah 18650 Batteries (Pair)
1x dual 18650 charger
1x Ultrafire Battery Case for your 18650's
1x Microfiber Cloth
1x Replacement Tail Cap
2x Replacement Washers.

-2 Weeks Warranty on the diode - 1 month on the driver/click.
As long as you dint cause the damage i will replace that part fully on me under the Warranty time frame above...
Warranty will be voided if you attempt to open the laser. There is a Void Seal that if you try and unscrew the Head it will break that seal. SO PLEASE DO NOT OPEN THE LASER. Thank You.




Pictures:

Everything You Get.

Beam Shots with Fog.

Price:
$374 FREE Shipping Express mail with TRACKING in the USA. International I will only Ship with Express mail so i will have to check how much it would cost for your country.




PLEASE NOTE: I will Not sell this laser to anyone that does not have proper Laser safety Goggles. "No Exception" If you dont have a pair of Laser Safety goggles and you are still interested in it i can recommend a good pair for you to buy or i can buy them for you and ship everything at once. Thank You.



PM Me or Post.



As always.....

:thanks: For Looking.!!!

 

[danefex]

Re: FS: 2W 445nm Laser in a Z5 Host

ZOMG that is sweeEEEeeet!!!

If I hadn't just spent next weeks paycheck on laser accessories I'd absolutely take this off your hands. The host itself is a sexy beast :drool:

Some lucky LPF'r is going to own this soon and it's not going to be me!

 

[JLSE]

Re: FS: 2W 445nm Laser in a Z5 Host

Very nice laser my man :beer:

Your builds get better by the day :wave:

 

[blue bumblebee]

Re: FS: 2W 445nm Laser in a Z5 Host

NICE build!
cant expect less from you
:beer:

 

[DTR]

Re: FS: 2W 445nm Laser in a Z5 Host

That really does look nice and with a custom focus adapter.:beer:

No LPM picture?

 

[InfinitusEquitas]

Re: FS: 2W 445nm Laser in a Z5 Host

Holy crap that's a monster!:drool:

Must get great run time and a good duty cycle...

Some lucky is going to be extra lucky very soon.

Edit... with no offense to Gary and the great lasers he offers... this is a true survival laser, even big enough to whack someone over the head with:eg:

 

[lazeerer]

Re: FS: 2W 445nm Laser in a Z5 Host

Thanks Everyone.

Its a very Nice and Perfect size Host. Not too big but Great Heatsinking.

They Heat Gets distrubuit through the whole Head of the Laser. Even the Focusing Helps.

Its a Perfect 2W Host. Plus using the 18650 cell type will give you Longer ON Time.

That really does look nice and with a custom focus adapter.:beer:

No LPM picture?

I dont Like to Post LPM Pictures as I Like for it to be a Surprise when they get it.

A Hint is i alway Round Down.

If the Buyer does not own a LPM then I will give the Reading at His or Her Request.

 

[InfinitusEquitas]

Re: FS: 2W 445nm Laser in a Z5 Host

I dont Like to Post LPM Pictures as I Like for it to be a Surprise when they get it.

When I lpmed the last laser you made me, my jaw dropped. Granted I put in a g1 lens... but still I was expecting maybe mid .5W, not 656mW:drool:

 

[Tech_Junkie]

Re: FS: 2W 445nm Laser in a Z5 Host

Very impressive laser Angelos. :beer: It has a high end look, and the build is obviously top quality. Its a perfect laser to join the l33t 2W club. This is going to make someone very happy.

 

[bobo99]

Re: FS: 2W 445nm Laser in a Z5 Host

I'll be honest, I didn't see that its Angelos posting, however when I saw the pictures, I recognized the house (kitchen)

 

[DarkSide]

Re: FS: 2W 445nm Laser in a Z5 Host

Very nice build!

 

[jimdt7]

Re: FS: 2W 445nm Laser in a Z5 Host

Very nice and clean build ! Good luck with your sell !

 

[lazeerer]

Re: FS: 2W 445nm Laser in a Z5 Host

Thanks Guys.

When I lpmed the last laser you made me, my jaw dropped. Granted I put in a g1 lens... but still I was expecting maybe mid .5W, not 656mW:drool:

Yes it should be around Mid 500mW which IIRC without looking up the test results. The G1 is what really put the Power Up.:wave:

Very impressive laser Angelos. :beer: It has a high end look, and the build is obviously top quality. Its a perfect laser to join the l33t 2W club. This is going to make someone very happy.

THanks Buddy.:beer:

Yes Indeed. It is a Pretty Expensive host but well worth the Money.
It has a Nice Aggressive look to it.


The Duty Cycle is also Good On this Laser But i would Not Recommend More the 1 minute on 1 minute off. Since that is the Standard that I like to
fallow.

 

[weidmark]

Re: FS: 2W 445nm Laser in a Z5 Host

Nice clean build. Looks very professional.

 

[eytyxhs]

Re: FS: 2W 445nm Laser in a Z5 Host

Good Work on Heatsink & Focus adapter!

I love your builds!

 

[lazeerer]

Re: FS: 2W 445nm Laser in a Z5 Host

Nice clean build. Looks very professional.

Thanks. Yes its one of the Most Soothest Aggressive builds Ive done.

Good Work on Heatsink & Focus adapter!

I love your builds!

Yea Now that I have The Lathe Makes thing much easier to Have an Idea In your head and Just go into the shop and Make it.

I try to have different hosts that no one has Used Before.