Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers

Hi Alaskan,
Yes for a single mode pen really no need for an additional switch. At only over 100+ mW's we are in the safe zone with it.

Rich:)
 





Watch out, a well known veteran member will come nip us in the butt for having that opinion :p - I just worry about accidental fire, low powers aren't something I am concerned about at infinity focus.
 
Last edited:
Nice Laser P0rń, Rich. I’m digging these pens you’re coming out with. I need a couple side clickies in my life. I’ve been watching the tracking everyday on the heatsink :beer:
 
Last edited:
H
Shotgun when ever your ready I’m here buddy

@ GSS
Yes it is a brass button I machine them to fit the builds pal

Rich:)
 
Lifetime17 said:
Hi,
Here is a NDB7875/2X10440/G2/ SXD 2.2 mA soft start delayed /Side button Enjoy

Rich:)
Click to expand...

Lifetime17 said:
Hi BM,
Thanks buddy its a twist and you can see the beam out the front,
Hey if you like that check this one out i just finished , Its a full copper 495nm diode /1X14500.3 element lens/Side button..

Rich:)
Click to expand...


I'm so tempted on these two Rich. How much Mac&Cheese are you asking ? :D
 
:bumpit:-ity :bumpit: :bumpit: :bumpit:

About a third of the way through. This is a great way to find stuff you think you’ve lost! :D
 
Last edited:
  • Like
Reactions: GSS
Hi BM,
Yes indeed and a lot of stuff you haven’t used in years. Time to thin out the heard. That’s what I did when I moved gave away a lot of the extra load.

Rich:)
 
This is why you have kids and friends (slave labor). :crackup: :D
 
Last edited:
Hey Rich, I won some diodes at auction the other night from Techhood, a 35mw 505nm, a 30mw 520nm and a 1000mw NDG7475.

I want to build out the 7475 first and I almost always make my own hosts but I was thinking about something a little nicer for this one.

Do you have anything on hand ?

I want to use a full copper 12mm module with a 1.8a x drive behind it so I need about 1.5 inches of heat sink beyond the springboard.
 
Hi Red,
Are you looking for a flashlight build or a custom, And do you need to heat sink the driver? And what material ?, AL,CU or AL with a CU core. Let me know.

Rich:)
 
RedCowboy said:
Hey Rich, I won some diodes at auction the other night from Techhood, a 35mw 505nm, a 30mw 520nm and a 1000mw NDG7475.

I want to build out the 7475 first and I almost always make my own hosts but I was thinking about something a little nicer for this one.

Do you have anything on hand ?

I want to use a full copper 12mm module with a 1.8a x drive behind it so I need about 1.5 inches of heat sink beyond the springboard.
Click to expand...

That 505nm diode is case positive. Because it has a high Vf, the only driver that works with it is the Blitz Linear Driver from SL. They can be a PITA to set up.
 
RedCowboy said:
I was thinking about this one but it says 3.0v in, I wonder if it can take 4.2v in which under load would be a little less.....maybe 3.0 is the minimum in ?

If not a couple of alkaline C cells should run a 30mw for a long time.

https://www.ebay.com/itm/Adjustable...d=132212679550&_trksid=p2047675.c100005.m1851
Click to expand...

I bought that driver some time ago. It is a continuous negative boost driver that is constant voltage, not current. So, even if it worked, you couldn't use it for a case positive diode anyway. You won't find a boost driver that will work for this diode, but there is an obsolete Switched X-Drive that would work if the input was high enough. Really, the Blitz Linear Driver is the only one around that you can use with this diode.
 
You must log in or register to reply here.





Back
Top