Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers

[paul1598419]

There's always ruby at 694nm.

 

[RedCowboy]

Bump

 

[Lifetime17]

I remember when the 713 exchange was Beaumont, TX. That changed back in the 1980s. Had to get used to a whole new exchange for Beaumont.

Hi Paul,
I dont see any discussions about area codes on my sales page. Maybe you posted on the wrong thread , am I missing something ??
Rich

 

[paul1598419]

Sorry. It was in response to a post by hakzaw1, which he deleted. I did the same.

 

[Lifetime17]

H Paul,
Yes I was lost on that , no biggie pal thanks for the reply
Rich

 

[Lifetime17]

Bump
FOR SALE.. 80.00
Here is a trans blue powder coated Mag Light , for a DTR 12mm copper module. This host is prewired with 22AWG silicon wire, And the tailcap has been machined out so the spring sits low for easy battery installation. Also has a custom focus adapter, the heat sink is massive for cooling of the heat transfer of the diode. Has cooling fins grooved in the sink as well.
It also hods 2X32650 or 2x26650 batteries and includes a reducing tube for the 26650.s
Thank You Rich

 

[Lifetime17]

 

[GoldenDragon]

Hello Lifetime,
I was wondering if you have (this is based off one of your pics showing multiple silver aluminum host ((i couldn't post the pic))
an aluminum host with a side clicky switch that will be hosting a dtr 12, 20, 25mm copper module with a Nubm44 and driver set to 4.4, idealy i wouldn't mind having a tail switch also. depending on cost, a bezel that matches host for a focus knob, and depending on design, a heatsink for copper module with fins. I have a benchtop lathe, and can handle the heatsinking but if it's cheaper to purchase, i'll go that route. I'm rather slow, and haven't learned how to thread yet. For the batteries, i'll be running 2 Vapcell INR16340's
or even a factory host that has a side clicky and made of a decent aluminum not the thin stuff like the old hotlights.
Thanks for your time,
Tim

 

[Lifetime17]

Hello Lifetime,
I was wondering if you have (this is based off one of your pics showing multiple silver aluminum host ((i couldn't post the pic))
an aluminum host with a side clicky switch that will be hosting a dtr 12, 20, 25mm copper module with a Nubm44 and driver set to 4.4, idealy i wouldn't mind having a tail switch also. depending on cost, a bezel that matches host for a focus knob, and depending on design, a heatsink for copper module with fins. I have a benchtop lathe, and can handle the heatsinking but if it's cheaper to purchase, i'll go that route. I'm rather slow, and haven't learned how to thread yet. For the batteries, i'll be running 2 Vapcell INR16340's
or even a factory host that has a side clicky and made of a decent aluminum not the thin stuff like the old hotlights.
Thanks for your time,
Tim

Hi Tim,
If your going for the NUBM44 v2 diode I suggest a very large heat sink for heat dispersion.
And also a lager battery , 16340's wont do you much good with that diode. I have his host ready and it has a translucent blue powder coated heat sink. It is made for a DTR 12mm copper module , but I can bore out the sink for 20 or 25mm DTR copper module . The host holds 2X32650's or with the included battery tube reducer 2X26650 batteries. It a side button and prewired, The tailcap has been bored out so the spring sits lower in the cap for ease of screwing on the tail cap.
Rich

 

[cncyana]

Hello Lifetime, Nice host for a really great price, especially with the custom head!

Question:
How many amps will the mag switch handle?
Which brand of 32650 battery do you recommend these days.....TrustFire, FCDC, Liitokala, or.......?

thanks.

 

[Lifetime17]

Hello Lifetime, Nice host for a really great price, especially with the custom head!

Question:
How many amps will the mag switch handle?
Which brand of 32650 battery do you recommend these days.....TrustFire, FCDC, Liitokala, or.......?

thanks.

Hi,
Yes with no issues made many for customers.
Rich

 

[Alaskan]

Rich, always love your hosts which will take the large batteries, nice.

 

[Lifetime17]

Rich, always love your hosts which will take the large batteries, nice.

Thank you Alaskan,
These larger host are great for high power builds and the larger batteries do it well .
I am fond of the Efest 26650's they last forever.
Rich

 

[GoldenDragon]

That host is beautiful, wish I could add it to my collection.
This build was a request, he wanted it to be somewhat compact and close to the same dimension's as my stainless solar force. (didn't know how to resize my pic or I would of posted it). Do you have any other host that will hold (2) crc123's with a side switch? It's been awhile since I looked around for a host with a side switch. Anyways, thank you for your time and keep producing those amazing host.

 

[Lifetime17]

Hi,
If your looking for a host that holds 2X16340's and is compact try the 501B host . it has a rear latching switch , the heat sink can be machined in copper or aluminum . Aluminum heat sinks can also be powder coated to a specific color for an additional cost.
Rich

 

[icecruncher]

CAREFUL------Watch out on the newer 32650 batteries. Many of them are now 3.2v not 3.7v.

Only place I have found 32650 batteries that are decent, are the Feilongs on Ebay. Which I use in my jayrob flashlight.

IMHO, stay away from the Trustfire brand. Although I haven't tried their 32650, all the other ones I've owned in the past have been subpar and I've owned a lot of them.

There is also an IMR 32650 that just showed up on Ebay, I haven't tried.