Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

GB: 2$ copper modules ALL SIZES CLOSED

There be copper in them thar hills!

beeakn.jpg


Arrived today. Thanks a million AnthoT & DTR.

:D

Wow all the international packages are getting there and FAST! :D I'm glad :)
 





Normally I get my international mail fast but this time the postman has gone on holiday. :D
I am still waiting for ( several ) packages.
 
Normally I get my international mail fast but this time the postman has gone on holiday. :D
I am still waiting for ( several ) packages.

:p hopefully you get it quickly :D it's still possible for up to 21 business days but I hope not :D
 
Ok guys, I have a problem, I've tested most of these and a lot of them have bad threads. The threads for the lens are tight and the lens don't screw all the way down, the lock up and bind. Has anybody had any problems?
 
Ok guys, I have a problem, I've tested most of these and a lot of them have bad threads. The threads for the lens are tight and the lens don't screw all the way down, the lock up and bind. Has anybody had any problems?

Nope, some of the threads are tighter on mine (but I prefer it like that anyways) but never had one lock up.
 
Ok guys, I have a problem, I've tested most of these and a lot of them have bad threads. The threads for the lens are tight and the lens don't screw all the way down, the lock up and bind. Has anybody had any problems?

They are tighter than Aixiz but I've had no problems.... Maybe your lens is bad :confused:
 
Ok guys, I have a problem, I've tested most of these and a lot of them have bad threads. The threads for the lens are tight and the lens don't screw all the way down, the lock up and bind. Has anybody had any problems?

Actually I did but I thought it was my glass lens holder threads which were a little damaged...I used a 9mm 0.5 tap to sort it out and it now works fine. Ill check the others to see if they are the same. :beer:
 
Actually I did but I thought it was my glass lens holder threads which were a little damaged...I used a 9mm 0.5 tap to sort it out and it now works fine. Ill check the others to see if they are the same. :beer:

Yours too :( but I tested each with a 3 element lens I had :( they worked :) glad you fixed it though :D
 
I've tried multiple lens'

I just tested all of mine and about half lock up before bottoming out. The others work perfectly. One of them the lens doesn't even start to screw in at all. :confused:

I have a tap at work I'll try to run it through them and see if that fixes the problem.

Anybody want to buy 2 M140s in these modules with bad threads? :(
 


Back
Top