Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: Jibs Linear Drivers

Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

The next batch of 4 should be ready by Fri Feb. 4 at the latest.
 





Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

Danafex and Tonga your drivers have shipped. :beer:
 
Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

I take it from the pictures that these drivers arent mountable? If i wanted to krazy glue the driver down, would that be fine with these?
 
Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

You do need to mount it on a surface that will heatsink them with a thermal adhesive like Artic Alumina. What are you mounting it to?
 
Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

Well, i wanted to mount it to a flat and thin aluminum surface.

If i wanted to make my own, do i just need the LM1117 and a 1ohm resistor to get 1.2A?
Thanks,

Matt
 
Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

mattmagic100 said:
Well, i wanted to mount it to a flat and thin aluminum surface.

If i wanted to make my own, do i just need the LM1117 and a 1ohm resistor to get 1.2A?
Thanks,

Matt
Click to expand...

That should be good for mounting, i can include a strip of sekisui thermal tape if you want, but its not as good as filling all the gaps with thermal adhesive.

1 Ohm gets you 1.25A. The 10uF caps on the input an output are required for the LM1117 since it is a Low Drop Out type of regulator ... it keeps the driver stable.
 
Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

Oh okay, well then ill just wait for you to finish yours. And its fine, ill just purchase some thermal epoxy
 
Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

Got my drivers today :D Many thanks Jib77 - the packaging is excellent, everything is identified clearly AND Jib threw in a few extra unexpected goodies.

I will be ordering more drivers from you in the very near future, thanks again :beer:
 
Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

jib77 said:
Danafex and Tonga your drivers have shipped. :beer:
Click to expand...

I got my drivers, and thank you for the boards, this is great they are beautiful! This is a Great Deal man Thanks again!:yh:
 
Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

Jib can you put me down for two. Thanks.
 
Last edited:
Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

^ ^ Hi Extrion... Do you mind telling me what you're firing in what looks to be an unfinished room in your avatar? It appears to be some sort of laser gun, something the idea of building often wakes me in the night.
 
Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

hey jib, what type of shipping do you provide to send out these drivers?

thanks!,
matt
 
Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

beautiful.... nice job :beer:
 
Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

Thanks, now I just need drivers for the 3 empty hosts and 5 diodes or so I have laying around and I will be on my way to my next builds.
 
Re: FS: LM1117 Based Linear Driver - 1.3A Fixed

I would like those 2. Can I go ahead and pay now?
 
You must log in or register to reply here.


Back
Top