Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Copper Pen Host - The Cypreus Series 2x10440 - [All Sold]

Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

Was that built or a guess. I thought it was an original guess, might be wrong. Havent been following this thread too close
 





Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

Gonna look for the highest powered 685nm diode around :)

IIRC lazeerer had one with 150mW.. I like the color a lot :beer:

yeah indeed a nice color :)
c-mount with 500mw rated and 690nm +/- 10nm is only
160$
But a c-mount in such a host is a challenge even for lazeerer;)
 
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

I got my 4 efest IMR10440 batteries in. They were $15 shipped so about 3.75 a piece.

I know what a AAA battery is like, but when i got these i kinda felt like they were really small. lol

Silly me. I guess i can use them to estimate how large the host will be.

So, how long will the module have to be (from bezel to battery) so that the spring touches the battery?

Thanks
-Matt
 
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

I got my 4 efest IMR10440 batteries in. They were $15 shipped so about 3.75 a piece.

I know what a AAA battery is like, but when i got these i kinda felt like they were really small. lol

Silly me. I guess i can use them to estimate how large the host will be.

So, how long will the module have to be (from bezel to battery) so that the spring touches the battery?

Thanks
-Matt

Where did you get the batteries from, I heard illuminationsupply has them for $3.25 a piece so US local members can order directly from there.

The module, with attached driver shouldnt be more than 25mm long, 30mm including spring. :beer:

Presales ending soon, I'll be sending pm's accordingly so everyone can send the payment in the mean time. :beer:
Add/Remove or Upgrade period is ended.
 
Last edited:
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

Are there alternate shipping methods?

The included shipping will take weeks to get to the US. I CANNOT WAIT!!! :D

:beer:
-Matt
 
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

Depending on the completion and when shipping starts, I can give you an exact estimate on shipping and other options offcourse. I cannot prioritize any individual orders just yet because all of them are in the same production process and can delay other orders too! hope you understand. :beer:
 
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

It didn't say in the OP is there a set screw or is it press fit for the 12mm copper module?

Is the clicky pre-installed?

So excited, I will see if I can afford a fast shipping method :p

:beer:
-Matt
 
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

from all the current sinner builds i know of, or have purchased, the tail switch will be preinstalled and the module is press fit
 
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

Will I need a vice or is it something I can do with my hands? Pressing module and host down on a board?

Thanks
-Matt
 
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

if its press fir you will need a vice or clamp most likely. Can't wait for my white powdercoat beauty to get here- thinking a nice 500mW 405 in it
 
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

I would a least use a c clamp. I don't think your weight will be enough.


I need a 9mm pen, and a m140 and a 638, and a 405 , and a 450, and a 650, and a 532, and a 520 , yeah that should do it.
 
Last edited:
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

Why have a 9mm & and M140 445nm pen?
 
Last edited:
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

I'm making two sets. A 2 cell set and a 1 cell set. Each set will need a 445 .


Thinking about using a osram and doing a 2cell multimode set, and a 1 cell single mode set
With the single mode 450, 638, 532, 405 .
Multimode set , 445,638,520, but I would have to break the trend with the 405 .
 
Last edited:
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

I built my module like this: PL520-B1 it measures exactly 33mm from copper module to end of spring.

9143-image.jpg


9142-image.jpg


sorry the pictures are a bit blurry my IPhone5 has seen better days
 
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

All ready to go ey? Looking good.
 
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

Looks pretty similar to my setup :)

Sinner does that look ok?

Thanks for showing!
-Matt
 





Back
Top