Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Copper Pen Host - The Cypreus Series 2x10440 - [All Sold]

Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

I hope with an x drive it doesn't make it too long. If so may just have to cut down the spring a bit.
 
Last edited:





Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

I might put some glue around the back of the diode for support. I noticed when I tested this with the S4 host the battery applied a bit of pressure to that connection.
 
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

Does anyone know if a Mohgasm driver will fit inside this pen? I have about 10 M140 diodes left over from a projector I split a year ago and wanted to use one in one of these pens. I ended up buying the two cell pen thinking I would use a linear driver for the M140. I've got some Mohgasms stashed somewhere, need to find them if they will fit. Would be great if I could do exactly what was done in the pictures above with a Mohgasm. Also, it's been so long since I've messed with a Mohgasm I cannot remember the max current without heat sinking the driver, anyone recall that too?
 
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

I might put some glue around the back of the diode for support. I noticed when I tested this with the S4 host the battery applied a bit of pressure to that connection.


It would be nice to find a bunch of those plastic drive retainers I'm new wish pens. They really come in handy
 
Re: PRESALE: Copper Pen Host - The Cypreus Series 2x10440 and 1x10440

Finally the time for a final update before they get shipped, I tried my best to be on schedule but please forgive me if there is a couple of days delayed due to the weekend.

Pre-orders are suspended temporarily, and will be resume them after the final countdown and I'll se if there are any leftovers otherwise only the bare-copper version will be available.
 
Re: PRESALE ENDED: Copper Pen Host - The Cypreus Series 2x10440 {Shipping ETA: 2/12/1

I see sinner, you added the Shipping ETA as 2/12/14! YAY!

Any word on the alternate shipping methods?

Thanks! Everyone really appreciates your work!
-Matt
 
Re: PRESALE ENDED: Copper Pen Host - The Cypreus Series 2x10440 {Shipping ETA: 2/12/1

Which shipping option did you choose?
 
Re: PRESALE ENDED: Copper Pen Host - The Cypreus Series 2x10440 {Shipping ETA: 2/12/1

Was there an option?

Sinner said he would update me on faster shipping methods when the hosts were done :)

:beer:
-Matt
 
Re: PRESALE ENDED: Copper Pen Host - The Cypreus Series 2x10440 {Shipping ETA: 2/12/1

On the order sheet there was first class, priority, express, etc options with different prices. But I'll see what the final verdict is.
 
Re: PRESALE ENDED: Copper Pen Host - The Cypreus Series 2x10440 {Shipping ETA: 2/12/1

Tomorrow is the day! ��

I'm giddy as heck!

I want my tracking number ��

Thanks sinner. Make sure to update us!

:beer:
-Matt
 
Re: PRESALE ENDED: Copper Pen Host - The Cypreus Series 2x10440 {Shipping ETA: 2/12/1

Woot excited!
 
Re: PRESALE ENDED: Copper Pen Host - The Cypreus Series 2x10440 {Shipping ETA: 2/12/1

Where are you sinner ��

I'm ready for an.....OOPDATE!
 
Re: PRESALE ENDED: Copper Pen Host - The Cypreus Series 2x10440 {Shipping ETA: 2/12/1

The hosts are in, there's a lot of sorting out to do and we have a few damaged ones in transit , luckily we have some extras to cover that so we're all set. Packaging will be in progress and everyones hosts should go out before the weekend. :D
 
Re: PRESALE ENDED: Copper Pen Host - The Cypreus Series 2x10440 {Shipping ETA: 2/12/1

What's the best way to setup a 9mm 445nm with this host? The greenie pictured above has a case pin. Any ideas? :thinking:
I have the 2 cell model for this 9mm build.
 
Re: PRESALE ENDED: Copper Pen Host - The Cypreus Series 2x10440 {Shipping ETA: 2/12/1

Dtr can add a case pin. I talked to him about the same thing.
 
Re: PRESALE ENDED: Copper Pen Host - The Cypreus Series 2x10440 {Shipping ETA: 2/12/1

Dtr can add a case pin. I talked to him about the same thing.

You can also squash a multicore wire between the module and host when you press the module in.

How is it possible to add a case pin?

:beer:
-Matt

Edit: have the hosts shipped?
 
Last edited:





Back
Top