Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Community Focus Knob - Group Buy - 2 packs left

Re: Community Focus Knob - Group Development / Group Buy - Take two :)

And it will be knurled so it will look a little smaller so will be perfect, shouldn't stick out at all off the smaller hosts.


@ RHD NVM I get it... Can you Update the OP so the newest model is displayed? Or have all the options we have come up with that are "Good" :p
 





Re: Community Focus Knob - Group Development / Group Buy - Take two :)

yea...taking some measurements myself, i realized that 19mm is just right, although on some builds it might look to big, BUT krogith said, knurling it would reduce how big it LOOKS so yea. 22mm is huge, and doesnt fit alot of host, 16mm is kinda of sad...only a lil bigger than the stock aixiz, anything bigger than 22 would probably bring costs up to high.
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

Why would knurling make it look smaller? Knurling with actually increase the diameter as it dosent compress the material as much as push it to the sides to make mounds and valleys.
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

Well, I didn't want to update the OP to imply that my design was THE design, since we've had some cool other ones emerge here.

But I'll add mine, and would be happy to add the others on request :)
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

@RHD can you do your design with 3 parts touching the center instead of 2? I'd like to see how it looks
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

I'll give that a shot later this evening (I like the idea)

Plus, redoing it will give me a change to adjust the thicknesses based on a 19mm size - more properly. I'm semi concerned about the thickness of the lens thread walls, so I think a bit of an "update" is in order.
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

i pick 26 :/
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

Hey rhd, like i said earlier, consideration for high output lenses should be included when you design the thread depth of the focus adapters. The normal aixiz works fine, but some custom adapters have too deep threading which does not allow focusing to infinity. Just my $0.02
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

Could this be solved with a 1mm thick 5mm diameter washer? IE, add it between the lens and focus knob before you screw the lens in ?
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

true, that might be ok...probably 2mm if the threading is too deep. It would be nice to make it plug n play. Then again we are trying to please the general public so yea.

the picture of the focus knob on the Poll page seems spot on. I'd say that should be the design. Simple yet elegant. should be cost effective but still knock the stock aixiz knob out of the water.
 
Last edited:
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

Hes making a "Better" One :D Get back to the drawing board @RHD
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

Update:
3 point version - thoughts?

attachment.php


attachment.php
 

Attachments

  • new2.png
    new2.png
    27.8 KB · Views: 172
  • new3.png
    new3.png
    43.1 KB · Views: 176
Last edited:
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

Ah they can;t be round like the same as in the OP??????

And the Center ring needs to be Thinner and the outter ring thicker so there the same Size and add a Bevel on the outter edge so it matches
 
Last edited:
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

yea what he ^ said. That new design is awesome though. Kudos for taking the time to design these suckers. We shoud let you name these new focus adapters rhd. The only concern with designs is that costs goes up with intricate details so yea. I've messed around with the software emachineshop provides, it turns out using more than 2-3 tools to make the piece dramatically increases cost.
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

I think I'm only at 2 tools right now (the "Auto" machine, and the Thread / Tap machine)

However, we'll be adding a 3rd tool to get it knurled. (which I'm not personally a fan of visually, but certainly seems to be a popular request)
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

Please can you show me the design with these mods? I'd love to see them done this way.


Krogith said:
Ah they can;t be round like the same as in the OP??????

And the Center ring needs to be Thinner and the outter ring thicker so there the same Size and add a Bevel on the outter edge so it matches
Click to expand...


And I think Knurled is a MUST!! :p
 
Last edited:
You must log in or register to reply here.





Back
Top