Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Community Focus Knob - Group Buy - 2 packs left

Re: Community Focus Knob - Group Development / Group Buy - Take two :)

If we groove the bottom, it will give us a tiny bit more range too - because we can use it on smaller hosts with 1 or 2mm lips- see:

attachment.php
 

Attachments

  • groove.jpg
    groove.jpg
    11.5 KB · Views: 479





Re: Community Focus Knob - Group Development / Group Buy - Take two :)

I also agree the opinion on the lip. Should be included.
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

well if the idea is to go "universal", I'd say this, make it only 16-18mm as to allowing it to be used on small pocket builds AND still be better than the stock aixiz knobs on larger builds. 2nd, You should make the threading not go in too deep as alot of us are probably using g1/g2 lenses the lens nut needs to go in deeper than with aixiz lenses. Thickness should be at 8mm. and as far as material, we should use the cheapest available. 6061 or 6063 is probably the way to go. RHD, your first 2 designs are probably the best way to go. I know with emachineshop, they charge base on how much time is spent setting up as well. the more details = more tools used = more setting up = more cost. I mean we are trying to find a cheap alternative to the aixiz focus rings right? those are like 40 cents each. The regular aixiz focus rings are only 12.5mm diameter or so. 18 should be just large enough while still being useable on the smallest hosts.

whats everyones thought on any of this?
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

I still think 22mm is best. people who have small builds can just use the normal aixiz knob.
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

It WOULD be nice to be able to use this on a pocket mini or CR2
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

Some max diameter figures:

16mm - Pocket Mini / Stainless Steel CR2
19mm - Aurora / SurvivalLaser
24mm - Guidesman
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

Add a Lip to make it fit on the Pocket Mini and I vote make it 19 mm due to the fact it can be used on everything (with the lip):thinking: It also Needs a Knurled Edge IMO


And who's going to make the dust Caps??
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

Good call, I'd like to add the option "18mm with a lip"

....WTH ? It won't let me edit the poll, nor delete the thread and start a new one?

What am I missing?
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

You can't, would have to do another poll
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

I say, 16mm lip and the actual thing 22mm
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

BH - I think 22mm is way too big
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

It would be for most units. BH don't worry there will be others made and im 100% sure you'll get a "bigger" option :D
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

I added the note about a lip on the 19mm option.

So give the poll a quick vote when you get a chance. We can still discuss more here, but this should be a good gauge.
 
Re: Community Focus Knob - Group Development / Group Buy - Take two :)

19mm with lip so it can fit 16mm builds!!! thats the one! got my vote
 
You must log in or register to reply here.


Back
Top