14x Blu-Ray Burners

[Blord]

BR diodes don't dim like 445nm diodes. When it goes over the maximum it will irrevocably turn LED.

 

[Hiemal]

So it's been over 6 hours where's mah results >:U

 

[Blord]

Yep it will be fun.:eg: I get off work in 6 hours and then I will start to tear it down.:beer:

Give Jordan a break. The review will come, have some patient !

 

[bloompyle]

Give Jordan a break. The review will come, have some patient !

The only thing keeping me patient is the fact that I don't have $140 to drop on a 14X anyway. Even if they are 1W, it'll have to wait. Although, that does revamp my plan to a 2W 405 PBS labby :eg:

 

[DTR]

Ok here is what I have so far. I will say there is something eerily familiar about this sled.:tinfoil:

Quck proof of life test @ 50mA.:beer:

 

[mattco2]

Moment if truth how much can this baby take and how much can she give

 

[AnthoT]

Moment if truth how much can this baby take and how much can she give

Im hoping the moment of truth is the moment of awesomeness of 1W of 405nm as well

 

[lman]

I have the same screw driver as you dtr

 

[NetGod3Com]

I'm givin' er all she's got Cap'n, If I push any harder the whole thing's gonna blow!

 

[lazeerer]

Well it would not be the first time we have seen different diodes in the same sled.

This has been an Exciting few days.

 

[Blord]

Yea, it is the good old time harvesting BR sleds.

 

[mattco2]

Now we need a cheaper source of those sleds anybody got friends in lg china?

 

[AnthoT]

Now we need a cheaper source of those sleds anybody got friends in lg china?

I know a few component suppliers so maybe one stocks these ill check soon..... Ill try getting a better price but im worried theyd be fake from china possibly

EDIT: Got a reply pretty quickly... sorry every chinese supplier i have links with and only one has LG blu ray burners and its 4X.....-_-.

 

[Lasermodder]

Any updates?

 

[DTR]

Here we go. I need to get a power supply with some fine adjustments. It was not easy to do 10mA increases.:tinfoil:

OK so I next jumped to 750mA and the power looked to drop below 1W so I ended the test for the moment to see if there are any requests before I kill this diode. I may have bumped the heatsink moving the beam slightly off the sensor but I reacted by shutting down.:beer:

 

[Lasermodder]

Here we go. I need to get a power supply with some fine adjustments. It was not easy to do 10mA increases.:tinfoil:





OK so I next jumped to 750mA and the power looked to drop below 1W so I ended the test for the moment to see if there are any requests before I kill this diode.:beer:

1W OF 405?! YAY! Now I can't decide if I should rip my new one apart, or put it in my computer. :undecided: I think I like blu ray too much to give it up.