Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

1.8W 26650/2.3W 32650 Ehgemus Alien Black Powder Coated Host

Re: 1.8W Ehgemus Custom 26650 Black Host

Toaster said:
So it wasn't enough voltage? Also, doesn't the Flex have quite a bit better efficiency than the Boost?

Also, I am not sure how you wire the drivers in parallel, can you throw up a pic? From the host to the battery? Thanks :) Parallel confuses me. Heh
Click to expand...

Voltage was fine(that is what the boost drive is for) was not enough current.

Here this thread will give you info on the dual drivers. Found it with a quick search:beer:
http://laserpointerforums.com/f67/parallel-drivers-53509.html
 





Re: 1.8W Ehgemus Custom 26650 Black Host

Toaster said:
So it wasn't enough voltage? Also, doesn't the Flex have quite a bit better efficiency than the Boost?

Also, I am not sure how you wire the drivers in parallel, can you throw up a pic? From the host to the battery? Thanks :) Parallel confuses me. Heh
Click to expand...

The voltage just dropped too much with double load on the battery.... hence the battery couldn't supply the needed current to provide for both circuits at the same time.

Sounds like a fatter battery is in order!
Something with more Amperage and less resistance going out.....4000mah?

Of course you could consider a longer host and do two 18650's end on end which would double the voltage and keep the amperage the same.....

I don't know if the dual circuit would maintain with that or not?... Seems that may be harder on the batteries though due to potential for more drastic voltage drops before it kicked out.
 
Re: 1.8W Ehgemus Custom 26650 Black Host

windstrings said:
The voltage just dropped too much with double load on the battery.... hence the battery couldn't supply the needed current to provide for both circuits at the same time.

Sounds like a fatter battery is in order!
Something with more Amperage and less resistance going out.....4000mah?

Of course you could consider a longer host and do two 18650's end on end which would double the voltage and keep the amperage the same.....

I don't know if the dual circuit would maintain with that or not?... Seems that may be harder on the batteries though due to potential for more drastic voltage drops before it kicked out.
Click to expand...

If you went with two 18650's in series the voltage would be above the max for the flex or boost drivers. But a good linear driver would work in that case. Since it would not be boosting the linear driver draws the same current that it is pushing. So if you have it set to 1.6A then it will be drawing 1.6A from the battery which can easily be handled by most all 18650 batteries.

I do have an 18650 with a 5.4A discharge that I tried in my this host last night and it works. The capacity is much less but we have a working substitute. :D
 
Re: 1.8W Ehgemus Custom 26650 Black Host

I.. I... I have no words. Just the idea of DUAL flexdrive. just wow :bowdown: :bowdown: :bowdown: :bowdown:
 
Re: 1.8W Ehgemus Custom 26650 Black Host

if you could pm me your phone number would be great.
 
Re: 1.8W Ehgemus Custom 26650 Black Host

Silvershot said:
I.. I... I have no words. Just the idea of DUAL flexdrive. just wow :bowdown: :bowdown: :bowdown: :bowdown:
Click to expand...

Dr. Frankenstein is creating a monster!!!.

Just think....where did modern cpu's come from.... a single transistor.. now its millions!

While we play with dual now.. what if you made one with 10?, 100?.... the possibilities are impressive.

Would be fun to light up the dark side of the moon when its in cresent.... LOL!
 
Re: 1.8W Ehgemus Custom 26650 Black Host

If I may ask, how long did you wait for the host? Man, white would look amazing with a 445 build! Props on this great looking build! +1 :beer:
 
Re: 1.8W Ehgemus Custom 26650 Black Host

wannaburnstuff said:
If I may ask, how long did you wait for the host? Man, white would look amazing with a 445 build! Props on this great looking build! +1 :beer:
Click to expand...

I would say the wait now is probably longer.:eg: But it went from idea to on my doorstep in two weeks.:beer:
 
Re: 1.8W Ehgemus Custom 26650 Black Host

wannaburnstuff said:
If I may ask, how long did you wait for the host? Man, white would look amazing with a 445 build! Props on this great looking build! +1 :beer:
Click to expand...
I wanted to make this white with a blue switch but no he had to have black.:na:
 
Re: 1.8W Ehgemus Custom 26650 Black Host

omg that thing is a monster!!!! what wattage cant these amazing diodes reach!??!?! :D
 
Re: 1.8W Ehgemus Custom 26650 Black Host

inuboi8 said:
omg that thing is a monster!!!! what wattage cant these amazing diodes reach!??!?! :D
Click to expand...

~2W What I have heard from DTRs test. After that, they go in a temporary LED like state
 
Re: 1.8W Ehgemus Custom 26650 Black Host

Silvershot said:
I.. I... I have no words. Just the idea of DUAL flexdrive. just wow :bowdown: :bowdown: :bowdown: :bowdown:
Click to expand...

Ahem, this wasn't the first dual driver build you know... :whistle:

http://laserpointerforums.com/f65/dual-microboost-driven-skyray-build-1-8a-55628.html

I will be updating the above thread soon with focus ring mod... (Mine may not be first either of course! :D )



Still a great build in this thread. Well done to both the collaborators.

M
:)
 
You must log in or register to reply here.


Back
Top