Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

1.6W Ehgemus 14650 Pen Host W/Dual Flexdrives

I can think of a few that have done driver mounts like this.:D
 





Alright here is the build.

Old host VS new.

p1015462.jpg



p1015466.jpg





As you can see this unit poses a challenge to press the diode. Since my diode press from Flaminpryo is too fat I had to find another way.

p1015469.jpg





I pulled out my diode removal tool from Flaminpryo and removed the center screw since it is the right size for pressing the diode and is skinny enough not to hit the driver mount wall.


p1015472.jpg




I used a vice to press in the diode.

p1015470.jpg




I made sure when I put the diode in that the case pin was facing upwards so that I could solder it once it was pressed but that also left the pins backwards so the driver will have to be mounted sideways with some slack on the wires.

p1015474.jpg




I wired it all up and put some adhesive to hold the positive contact point on the module.


p1015485.jpg





Put the contact point in the module and let it set for 15 minutes and then screwed the module into the host.:D

p1015495.jpg







Threw in a battery and an Aixiz lens(was going quick and did not bother with the focus adapter yet) and did an LPM test. 1.4W with the Aixiz so it will be close to 1.6W with a G-1.:gun:

p1015494.jpg






I like it.:D This is a great option for the 14650 host.:beer:

How much is one of these hots? Or should I just PM him?

The host was $60.;)
 
Last edited:
Here is a funny one. I went to throw away the package that Ehgemus had sent my host in and found he had supplied a press tool.:whistle:

I will have to try it out next time.:beer:

p1015496.jpg
 
I love this one, Must be hard to fit both flex's in that bad boy! I have a few 1.8A drivers, but need two batteries. I think this host, made for two 14650's would be so bad ass at 1.8A!

That driver tray does seem perfect for that 1.8 driver huh? I can imagine a 2x18650 version of this would be sweet.
 
That driver tray does seem perfect for that 1.8 driver huh? I can imagine a 2x18650 version of this would be sweet.

Or a 2X26500 host. Which would be a bit shorter.:beer:
 
Very cool build, over the top for sure ! I have never seen a pen host this powerfull befor.
Very good work there DTR your wiring leaves nothing to be desired, very professional
looking +2 for you guy on a truly very C:cool::cool:L build !

And what a host Ehgemus you have done it again a real winner :gj:
keep em comming !
 
That driver tray does seem perfect for that 1.8 driver huh? I can imagine a 2x18650 version of this would be sweet.

Yep, I think I found the host for that 1.8A driver job. This pen host to fit to 18650's!
 
Thanks guys glad you like it. I love this picture, very clean looking.
p1015495.jpg


This will not be the standard module you will need to ask for it and it will be a few bucks extra.:evil:
 
Thanks guys glad you like it. I love this picture, very clean looking.

Thanks. That is what I love of this hobby the most. Nothing more rewarding than building something that look as good as that.:D
 
Come on, highflya. This thread is 3 years old. Please, PLEASE don't necropost.
 
Looks like to just necroposted yourself. Just asked a simple question no biggie.
 
Looks like to just necroposted yourself. Just asked a simple question no biggie.

It wouldn't be as bad if the answer to your question wasn't in the title :p

And crazyspaz was NOT necroposting, you were.

Good day sir
-Matt
 


Back
Top