Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

1-1.2 watt 445nm lasers

Re: 1-1.2 watt 445nm lasers **OUT TILL FEB-5TH** CHEAP $180

pm'd you, i'm in for one once you have more.
and no this is not my first laser, just new to the forum
i'm located in san diego
 
Last edited:





Re: 1-1.2 watt 445nm lasers **OUT TILL FEB-5TH** CHEAP $180

i also want this laser for sure. I might want to buy 2.

i`m located in san francisco.

thx
 
Re: 1-1.2 watt 445nm lasers **OUT TILL FEB-5TH** CHEAP $180

Just got my LPM And this things still kicking out 1.2W. I'm very happy with the laser. Thanks Again for your hard good work.
 
Re: 1-1.2 watt 445nm lasers **OUT TILL FEB-5TH** CHEAP $180

Shit , today is the 5 feb -.-

Your laser is better than the spartan and the arctic ^^ I also want to buy one , but can you deliver to austria (next to germany)
We have a stupid custom control on our borders....
 
Re: 1-1.2 watt 445nm lasers **OUT TILL FEB-5TH** CHEAP $180

AcSightHawk said:
Shit , today is the 5 feb -.-

Your laser is better than the spartan and the arctic ^^ I also want to buy one , but can you deliver to austria (next to germany)
We have a stupid custom control on our borders....
Click to expand...

If your customs wont let you have it, then it would get taken by them just the same "most likely"
 
Re: 1-1.2 watt 445nm lasers **OUT TILL FEB-5TH** CHEAP $180

i sent you a PM, I'm excited to buy one of these. i've got the money ready! ;)
 
Re: 1-1.2 watt 445nm lasers **OUT TILL FEB-5TH** CHEAP $180

These are the last 20 I am selling and then I am out of here. Sorry guys. Thanks to those who have supported me.
 
Re: 1-1.2 watt 445nm lasers **OUT TILL FEB-5TH** CHEAP $180

Buy them while you can !! Glad i have 2 of 'em =)
 
Re: 1-1.2 watt 445nm lasers **OUT TILL FEB-5TH** CHEAP $180

ATEspo said:
Just wondering because I was trying to pop some balloons hanging from our ceiling in our showroom (dark blue and black) from about 10 feet away and no matter how I adjust the lens they will not pop, but if I get within 2-3 feet it will pop no problem.
Click to expand...

Never use the same color as the beam... it reflects the energy of that frequency the most and therefore doesn't absorb it.

Black should be fine though. Red is good too.... Whites and yellows etc will reflect too much.

10 feet away, you need to have a steady hand and balloons like to move a bit in the breeze of subtle air currents in the room.
Anchor the balloon between something, then brace your hand on a chair or something.......

This is similar to sharp shooting a bullet at a target..... except it takes a second or so to penetrate.... if the spot moves, it cools instantly.

You can pop up to 30 feet or so if you can hold it steady for long.... at those distances, you will have a nice thin rectangle... it won't go to a perfect dot at those distances...... the nature of multitude diodes.
 
Re: 1-1.2 watt 445nm lasers **OUT TILL FEB-5TH** CHEAP $180

yobresal said:
These are the last 20 I am selling and then I am out of here. Sorry guys. Thanks to those who have supported me.
Click to expand...

Has been a pleasure... thanks for all your support and generosity....
 
Re: 1-1.2 watt 445nm lasers CHEAP $180

My laser stopped working on Friday:(, so I opened up the host to investigate. I can see why Yob had so many problems with people breaking their lasers because they were curious and opened them. The leads between the driver and the diode are super short and the module needs to be removed from the heatsink for disassembly. Anyway, somehow a wire broke off of the diode. I soldered new leads between the diode and the hosts stock driver with FlaminPyro's wire and heatshrink and now it's working great. I also made the leads much longer so there aren't any more disassembly problems.

On another note, if you are no longer running this build, will you still give technical assistance, Luke?
 
Re: 1-1.2 watt 445nm lasers CHEAP $180

rocket689 said:
My laser stopped working on Friday:(, so I opened up the host to investigate. I can see why Yob had so many problems with people breaking their lasers because they were curious and opened them. The leads between the driver and the diode are super short and the module needs to be removed from the heatsink for disassembly. Anyway, somehow a wire broke off of the diode. I soldered new leads between the diode and the hosts stock driver with FlaminPyro's wire and heatshrink and now it's working great. I also made the leads much longer so there aren't any more disassembly problems.

On another note, if you are no longer running this build, will you still give technical assistance, Luke?
Click to expand...

Yeah I will continue to offer support if it is needed.
 
Re: 1-1.2 watt 445nm lasers CHEAP $180

I pm'd you a few days back. I have the money ready to go. I definitely want one before you run out and stop making them.
Just let me know where to send the money and my address
 
Re: 1-1.2 watt 445nm lasers CHEAP $180

Well, I had to buy a new lense from Odicforce as I managed to uncrew the supplied one right before siginging on to a new ship. The supplied one happen to have two lenses, an O-ring and a tread ring.

Anyway, that is my fault, and any damage to the diode window from the evaporation of the standard azdiz lense is something I have to accept.

(it did look a bit melted) :D
 
Re: 1-1.2 watt 445nm lasers CHEAP $180

i also want to buy one or two, i have $$ please tell me where to send.

thx
 
You must log in or register to reply here.





Back
Top