Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

20mm Copper Modules for 9mm, 5.6mm and 3.8mm Diodes

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Since I added the 20mm copper modules for 9mm diodes a few months ago they have been very popular and have had many requests to make it a full set for the 9mm, 5.6mm and 3.8mm diodes. I have been working on the 3.8mm, 5.6mm versions and a machined driver shelf version of the copper back half. They are now ready. :san:

For host kits there will be options available here shortly. Survival Lasers is working on host kit options for them and I have also sent some samples to Jayrob and Flaminpyro as well which have said they will make kits for them as well. These also nicely fit in the 20mm XYZ aluminum bearing mounts for non portable continuous operating applications.


DTR's Laser Shop - 20mm Copper Modules



























 
Last edited:





Joined
Dec 15, 2014
Messages
6,775
Points
113
Hi Jordan,
Nice going pal great work with the driver placement sinked to the main sink. Copper rules and these will be an asset to our hobby. And thank you for all the rest of the awesome products you have on hand.
Oh Need more driver options to just a thought , thankful for what we can get though, Im sure everyone else will agree, but as they say beggars can't be choosers LOL !!
Great work as always buddy Kudos.... Thank You for sending my order so swiftly .. need stuff..

Rich:)
 

BowtieGuy

0
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,090
Points
113
Jordan, those are some great additions to the family!
The optional driver shelf is also a nice touch.
:gj:
 

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Hi Jordan,
Nice going pal great work with the driver placement sinked to the main sink. Copper rules and these will be an asset to our hobby. And thank you for all the rest of the awesome products you have on hand.
Oh Need more driver options to just a thought , thankful for what we can get though, Im sure everyone else will agree, but as they say beggars can't be choosers LOL !!
Great work as always buddy Kudos.... Thank You for sending my order so swiftly .. need stuff..

Rich:)

Thanks. I do have quite a few driver options up currently. Been working hard to broaden the selection.


DTR's Laser Shop - Drivers

Threre are:
X-Drive
SXD
Nano Buck Boost
Blackbuck 3
Blackbuck 6
Blackbuck 8
Flexdrive


Jordan, those are some great additions to the family!
The optional driver shelf is also a nice touch.
:gj:

Thanks yea the driver mount is awesome. I have a bet these can become more the standard going forward as the 12mm was really getting put to the test for the newer generation diodes and they are amazing on the lower power units. Ran a BDR-209 for several minutes today in just the 20mm module and it was barley warm to the touch.
 
Last edited:

Garoq

0
Joined
Aug 27, 2010
Messages
1,525
Points
83
Here are some photos of the Survival Laser prototype 20mm diode module adapter assembled with a DTR 20mm diode module and our S4 host. It will also fit a C6.

The inside lip of the adapter makes direct contact with the module and holds it in compression against the driver pill. By using a small amount of thermal grease, effective heat transfer can be established from the module to the adapter and the pill, and through the rest of the host.

Obviously a good number of different diode-driver combinations can be used in this configuration. I leave it to the imagination of the builder to decide what is the best combination of parts for their application. If you have any questions though, please let me know!

We plan on including a small O-ring that can be placed between the end of the module and the lip of the module adapter to compensate for slight tolerances in the length of the module if necessary.

I recommend using an extended focus ring with this setup because the module is recessed slightly inside the module adapter.

Note that this part is intended for use with the 20mm copper module with the built-in driver shelf. Due to differences in length it will not work with the other versions of the module (although Jordan told me that the other versions will be made the same length sometime in the future).

The production units will be black anodized, and should be available on the SL stores in a few weeks.

16426235_1578078172205686_941289797169410393_n.jpg


16473896_1578078175539019_2952190378225311855_n.jpg


16426189_1578078178872352_216305418439555106_n.jpg


16427690_1578078222205681_4810930856440902292_n.jpg


16265252_1578078218872348_706594602415768903_n.jpg
 
Last edited:

BowtieGuy

0
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,090
Points
113
Looking good Gary, with that combination of DTR's 20mm module and your adapter, the duty cycle on your S4 host should be increased significantly! :beer:
Hopefully this will become a hot selling mod for the S4's and C6's. Now time to bring on the 'big boy' diodes! :D
 
Last edited:

Garoq

0
Joined
Aug 27, 2010
Messages
1,525
Points
83
Looking good Gary, with that combination of DTR's 20mm module and your adapter, the duty cycle on your S4 host should be increased significantly! :beer:
Hopefully this will become a hot selling mod for the S4's and C6's. Now time to bring on the 'big boy' diodes! :D

Thanks...note that I edited the post to mention that that this part will only work with the copper module with the driver shelf, the other versions are a different length.
 
Joined
Nov 1, 2015
Messages
370
Points
0
These modules are looking good!
One question though... Being as I already have a full press kit, is there an option to get just the sleeve?
 

Garoq

0
Joined
Aug 27, 2010
Messages
1,525
Points
83
These modules are looking good!
One question though... Being as I already have a full press kit, is there an option to get just the sleeve?

If you're talking about the adapter, yes, we plan to sell it as a separate accessory.
 

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
If you mean the diode press sleeve yea I can do just a sleeve. Shoot me a PM.:beer:
 

Garoq

0
Joined
Aug 27, 2010
Messages
1,525
Points
83
The production 20mm diode module adapters are now available on the SL stores!

Mounted on an S4 host:

33156356842_6ae6ff02df_b.jpg


33156356752_36ba683c13_b.jpg


Mounted on a C6 host:

32497245313_4c7aef79ec_b.jpg


32497245473_243183e56a_b.jpg


33156357232_14e661998f_b.jpg


33183822481_46a4587314_b.jpg
 

BobMc

0
Joined
Apr 23, 2016
Messages
3,685
Points
113
Nice , considering making a build with one. Give it s shot. Now what diode would like a new home? :thinking:
 
Joined
Jan 7, 2012
Messages
149
Points
18
hello DTR,
I have been to your site and I can't find the overall length on the copper modules .

Are they all the same length regardless of outer diameter and with or without driver shelf?

thank you.
 




Top