World's record red

[hakzaw1]

))))))))))))) break out those 100$ laser goggles...., NOT..



along with worlds smallest they all are also the cutest lasers ever..


)))))))))))))))))))


Here are the four smallest lasers offered at AixiZ Laser (Houston) &
all are iirc 650 red. -- #-5 VDC-- It may be true (ATM) that there may be no smaller ones available.
My plans for these include replacing the red LED eyes in two Woo-Wee RC robots and a Star Wars Fighter/alarm clock (pic later) -- I have placed a common round toothpick next to them for size..
AixiZ also has the biggest size here in a 405nm module- a pair of which will also go into the fighter-
AFAIK you could use four of them to create a room alarm that sounds when any of the beams are broken-
Of the four below both the larger ones are focusable.. moar pics with them lasing are coming...
TY Dr. Chuck for providing the samples--

will make some pics with them lit later-- if you have a project in mind- I have quite a few of the larger ones in the pics below but you need to add your own leads--

PM me.

 

[ricktrent4]

what is the max power?

 

[Bionic-Badger]

You can get like 70 of those little 5mW lasers on eBay for about $18 shipped. Depending on the voltage you give them, some are > 5mW.

 

[ricktrent4]

that is what they look like .I got some of the 5mw they worked good.

You can get like 70 of those little 5mW lasers on eBay for about $18 shipped. Depending on the voltage you give them, some are > 5mW.

 

[Jmillerdoc]

That's very cool but when I clicked on the link I have to admit it's not what I was hoping to find. I thought you built some new monstrosity of a device :lasergun:
combining 20-30 red C-mounts or something.

Here is not the place, but maybe a little explanation about your websites current status is in order. Pressure from the outside or being proactive?

 

[ru124t]

I was picturing something that could vaporize the rust off the fenders of my car but this was not the case.

 

[ricktrent4]

Me too

I was picturing something that could vaporize the rust off the fenders of my car but this was not the case.

 

[hakzaw1]

Guilty as charged--

I do know how to attract attention!!




Most of my meters are not so good with powers as low as these- fairly certain they are all below 5mW

-the two larger ones can focus-

sorry for 'rickrolling' you guys with my misleading title LOL!!

As BB sez on large lots these are dirt cheap-

I bet if asked many sellers would send free samples-

or perhaps just enough to cover the shipping- like 3$usd

if you are planning a small project these are the ones- AixiZ also has the larger one in 405nm & it also can focus.

BUY USA!!
you are an idiot to save a few cents and wait a long time for delivery-

AixiZ never marks stuff up very much- there are no REAL better prices --all things considered..

There is no AixiZ brick n mortor store- only a few lucky people have ever been invited to shop in person-

Except one ship clerk ( a neighbor college dood w/ ''almost" no interest in Lasers) there are no employees- its all family- including the grandparents-- Chuck's dad is the one who sorts out 5000 blank modules per box into bags of 5- 10 or more pcs- these do not come to AixiZ 'put together' and that is why they are sold un-assembled. Just how many has AixiZ sold?? -- dont know... but the average NOW is 2000 per month shipped world wide!! First buyer of a 'lot' sale???-- Our own Dr Lava- a long long time ago-- I think Andrew still gets the best discount on these-- (rightly so IMO)

Want to see a new item at AixiZ just tell me $ I will pass that along--

right now-

I am thinking of a feeler thread on a 'group purchase' of the new Pangolin '506' 30K compact Galvo scanners -

AND know this NOW- expect to pay up-front and be OK waiting - this many pcs is a risk- and buying large amts can backfire if sales are slow and the prices then drops- you are stuck with as high wholesale price and cannot profit..

The Amp/Driver is smaller than a deck of cards!!


list price I am just guessing will be about the same as DT gets for their Pro 40K(!$500) but the ScannerMAX is smaller- actually in a way faster & more accurate ( as 30k is the standard anyway) also you can 'flip' these for either side of your PJ-(no others are like that AFAIK) AND the size means no PJ will be too small to swap out for better galvos -- to read more see my scanner thread on these.. more than 10yrs in development- and in EVERY way they are better!!-- send me or aixiz.com a message if you think you may want a set- ATM only orders of >100pcs are being filled by Pangolin(almost all for China makers dealing in PJs)- -- no single sales likely for 3 or more months-- Unless we can convince AixiZ to take the plunge and order 100-(not really likely but...) you should mention me by name- anytime you contact Chuck-- he will not hold that against you!!


hak

 

[ricktrent4]

what up with the rickrolling was that at me? If put up most power it will be!

Guilty as charged--

I do know how to attract attention!!




Most of my meters are not so good with powers as low as these- fairly certain they are all below 5mW

-the two larger ones can focus-

sorry for 'rickrolling' you guys with my misleading title LOL!!

As BB sez on large lots these are dirt cheap-

I bet if asked many sellers would send free samples-

or perhaps just enough to cover the shipping- like 3$usd

if you are planning a small project these are the ones- AixiZ also has the larger one in 405nm & it also can focus.

BUY USA!!
you are an idiot to save a few cents and wait a long time for delivery-

AixiZ never marks stuff up very much- there are no REAL better prices --all things considered..

There is no AixiZ brick n mortor store- only a few lucky people have ever been invited to shop in person-

Except one ship clerk ( a neighbor college dood w/ ''almost" no interest in Lasers) there are no employees- its all family- including the grandparents-- Chuck's dad is the one who sorts out 5000 blank modules per box into bags of 5- 10 or more pcs- these do not come to AixiZ 'put together' and that is why they are sold un-assembled. Just how many has AixiZ sold?? -- dont know... but the average NOW is 2000 per month shipped world wide!! First buyer of a 'lot' sale???-- Our own Dr Lava- a long long time ago-- I think Andrew still gets the best discount on these-- (rightly so IMO)

Want to see a new item at AixiZ just tell me $ I will pass that along--

right now-

I am thinking of a feeler thread on a 'group purchase' of the new Pangolin '506' 30K compact Galvo scanners -

AND know this NOW- expect to pay up-front and be OK waiting - this many pcs is a risk- and buying large amts can backfire if sales are slow and the prices then drops- you are stuck with as high wholesale price and cannot profit..

The Amp/Driver is smaller than a deck of cards!!


list price I am just guessing will be about the same as DT gets for their Pro 40K(!$500) but the ScannerMAX is smaller- actually in a way faster & more accurate ( as 30k is the standard anyway) also you can 'flip' these for either side of your PJ-(no others are like that AFAIK) AND the size means no PJ will be too small to swap out for better galvos -- to read more see my scanner thread on these.. more than 10yrs in development- and in EVERY way they are better!!-- send me or aixiz.com a message if you think you may want a set- ATM only orders of >100pcs are being filled by Pangolin(almost all for China makers dealing in PJs)- -- no single sales likely for 3 or more months-- Unless we can convince AixiZ to take the plunge and order 100-(not really likely but...) you should mention me by name- anytime you contact Chuck-- he will not hold that against you!!


hak

 

[hakzaw1]

^^ ha ha no search 'rickroll' and you should find the story- its a form of 'trolling'- where something is posted that gives some the wrong idea -- you just happen to be a 'rick' like my brother-

richardhenzel.com

seen 'Groundhog day'?(the movie) ???

if so..

you heard my little brothers voice a few times-- he was one of the two morning DJs that was heard every morning over and over -- when the alarm went off.

hak

 

[ricktrent4]

that is a cool story !:wave:

^^ ha ha no search 'rickroll' and you should find the story- its a form of 'trolling'- where something is posted that gives some the wrong idea -- you just happen to be a 'rick' like my brother-

richardhenzel.com

seen 'Groundhog day'?(the movie) ???

if so..

you heard my little brothers voice a few times-- he was one of the two morning DJs that was heard every morning over and over -- when the alarm went off.

hak

 

[hakzaw1]

Yeah and its one movie that pops up every year near ground-hog day & I *think* he gets a small check every time it is shown (very small!)
he had two roles in ,,,,, shoot brian fart- cant recall the title- it was the one with Dan Akroid and John Belushi-- he is fresh out of prison and they 'get the band back together'

old age is messing with my memory lately-- ah!! 'Blues Brothers' -- duh!!

My buddy from school (KSU-Ohio)is also in it- he was one of the convicts at the very end where they are all dancing- he ( Joe Walsh) is the guy who jumps up on the table..and dances.-- show biz is a very tough career ...more out-of -work union members than ANY other-- as they say 'don't ever quit your day job'-- richard prolly does 20 auditions for every job he has ever landed-- maybe moar..

 

[bdgreenb]

Whaaaaat!? That's awesome Len. That radio show actually gave me the idea to get into voice acting! Let your brother know he helped change a life with that silly little roll, might have to pp him a few bucks next time I watch ghday.

 

[KapHn8d]

Very cool, buddy!

/c

 

[hakzaw1]

Thanks friends--
@ ricktrent

here is what i think the power is from these--
the 'biggest' ones make 4 to 5 mW- and each smaller drops about 1 mW
making the world's smallest red laser about 1mW --

BTW I took my Star Wars 'fighter' (Nebo IIRC) apart and will soon begin swapping the lights out with lasers- I hope , (when its done)- to have four reds- two 405 5mW and one 532 green- it will take some fog to see the beams-- I will be changing the alkiline batts out for Li-ions so It may be possible to avoid an external power source like a ac/dc wall wart. there are currently three batt holders on the bottom that each hold 3 AAs-
hk

 

[BShanahan14rulz]

looks like a sleeve that fits on the can of the diode. but what is the driver?!

Very cool