Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

what should the new Kryton be??

Re: what should the new Kryton be Poll

styropyro said:
[quote author=Diachi link=1219511545/0#10 date=1219521447]
C-mounts are a little harder to come across though, granted you generally get A LOT more power.
Click to expand...
Actually C-Mounts are very common and very cheap for the power.

I'm going to have to go with a C-mount, you could build 5 WATT 808nm handhelds for a couple hundred dollars, or a 2 Watt for about a hundred. (not including the barrel)[/quote]


C-mounts are common, I'll agree, and they are great for the powers, but the majority I have seen on eBay are IR.
 





Re: what should the new Kryton be Poll

I didn't say they were uncommon, I just said they aren't as common as 5.6mm diodes .
 
Re: what should the new Kryton be Poll

If the C-ryton idea wins, we should have a c-mount GB too!
 
Re: what should the new Kryton be Poll

Artix said:
If the C-ryton idea wins, we should have a c-mount GB too!
Click to expand...

now THAT s a great idea !

Should be able to get different colored diodes as well ranging through 635 - 650 - 808 - 980 etc
 
Re: what should the new Kryton be Poll

Diachi said:
[quote author=Artix link=1219511545/0#19 date=1219525611]If the C-ryton idea wins, we should have a c-mount GB too!
Click to expand...

now THAT s a great idea !

Should be able to get different colored diodes as well ranging through 635 - 650 - 808 - 980 etc[/quote]

I would want 100-150mW 635nM C-mount! :D
 
I can also very easily make a c-mount labby. Not to mention with lava's newer driver the flexmod it will easily work for scanners. Not to mention lava also mentioned working on a tec controller so that you could mount your module onto a TEC.
 
Re: what should the new Kryton be Poll

Artix said:
[quote author=Diachi link=1219511545/20#20 date=1219526101][quote author=Artix link=1219511545/0#19 date=1219525611]If the C-ryton idea wins, we should have a c-mount GB too!
Click to expand...

now THAT s a great idea !

Should be able to get different colored diodes as well ranging through 635 - 650 - 808 - 980 etc[/quote]

I would want 100-150mW 635nM C-mount! :D[/quote]

I was thinking the same thing! :D

--hydro15
 
I love that 35mw green module. I actually wanted to see if I could mount it on a kryton, but I am going to have to go with the c-mount because c-mounts are so powerful. [smiley=evil.gif]

--hydro15
 
hydrogenman15 said:
I love that 35mw green module. I actually wanted to see if I could mount it on a kryton, but I am going to have to go with the c-mount because c-mounts are so powerful. [smiley=evil.gif]

--hydro15
Click to expand...


The DX 35 labby module ?? Wouldn't be worth your while, it needs the heatsink on it, and even without its too big anyway .
 
i've already worked out a bit of the dimensions. 30mm wide, 30mm tall, 60mm deep with a seperation in half for access to the diode and chamber for the driver.
 
I like the idea of a C-mount Kryton. Not a labby though.

cryton.png


You know you love it, haha.

Edit: I'm leaving to go the snow for four days. You won't be seeing me around for a while. Wasn't important enough for a new topic so I whacked it in here. Cya dudes.
 
Kenom said:
i've already worked out a bit of the dimensions. 30mm wide, 30mm tall, 60mm deep with a seperation in half for access to the diode and chamber for the driver.
Click to expand...

Now is that big enough to run a 5W C-mount, with a continuous duty cycle?
 
You must log in or register to reply here.





Back
Top