Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers






Hi Folks,
Here are some 501B hosts they are prewired and hold 2X18350 / 1x18650 . They are bored out for a 12mm DTR or equivalent copper module with driver. Each host is shipped with a 4-40 hex wrench and shrink tubing for the solder joints.
501b hosts are $45.00 and the 502B host is $55.00 all are shipped Priority Mail 2.3 day for $9.60 CONUS
Thank You Rich:)
ACFEC304-6392-4992-B78C-4CF19AE72BDE_1_201_a.jpeg
 
Last edited:
Lifetime17 said:
FOR SALE. 75.00 + 9.60 Priority Shipping USA...
Here is a 2X18650 host with a 2 Inch Wide X 3 Inch long heat sink with focus adapter . Comes prewired this host is huge and weighs in nicely. The bore is a 12mm for a STR copper module, can be rebored for a 25mm DTR copper module for an additional 10.00 .
This host is way larger than a C8 host.
Being it has a huge heat sink I also included a milled copper heat sink for the driver.

View attachment 74228View attachment 74229
Rich:)

View attachment 74170View attachment 74171View attachment 74172
Click to expand...
Scrolled the last few pages to hopefully avoid a dumb question, but I'll throw it out there anyway. Is this the only host you have that could be bored out to hold a DTR 20mm copper module? Figured I should get on putting it in a host ASAP due to having a quarter second lapse of judgement and blowing up the TPS54627DDA regulator, which is one of many chips that are hard to find due to the chip shortage. Had to order one from Germany to get it before next month. (I'm praying that all I killed was that chip/the entire driver. I'll be crushed if I killed my prized NDG7475 in under a week).
But to the point at hand, is this the only 20mm capable host you currently have and or are you planning on making anything in the nearish future that can hold a 20mm module? Worst case I can always shift focus away from building my co2 cutter and use the bits to setup a light weight cnc/lathe but I'd rather not have something that looks like an amateur made and the time is ticking for the co2 tube so shelving it doesn't feel like an awesome idea.
 
Serious High Power Host. $75.00 +shipping USA
Here is a 3X18650 host , it has an enormous Aluminum heat sink. It also incorporates a solid copper insert with a driver shelf.
Its prewired with silicon wire and has a copper focus adapter.
Thank You Rich:)
iIMG_5825.JPGIMG_5826.JPGIMG_5827.JPGIMG_5828.JPGIMG_5830.JPG
 
Last edited:
Hey rich I always wondered. What do you do with the shavings after? Recycling?
 
Hi,
Aluminum isn't with much there is no weight to it. I recycle the brass and copper .
Rich:)
 
Hi,looking for two hosts
1 for a 12mm,single 18650
1 for a 12mm,18650 x2
Both using DTR's modules.
Price and pic?
Thanks,Mike
 
You must log in or register to reply here.


Back
Top