Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers






FOR SALE.. 35.00 + 5.00 1st class mail
Here is a 1X18650 / 2X18350 host prewired , bored for a DTR 12mm diode and driver.
Thank You Rich:)
0E119684-B863-40AD-B95D-A51A7EA18C94.jpegC9CE735F-5D2A-4DB0-B953-8D5F25CE634A.jpeg4C53A59F-C22E-4D12-971C-7F0DBCB83BB1.jpeg
 
Last edited:
FOR SALE.. 40.00 + shipping 1st class mail 5.00
Here is a 2x10440/2XAAA pen host prewired , Holds a DTR 12mm copper module with driver. Also has a custom contact board built in the heat sink.
Thank You Rich:)
E7E3A567-426D-4AFF-9103-71F396EA44A3_1_201_a.jpeg777DE66B-760A-4266-AA02-400AC5484092_1_201_a.jpeg90109F3A-74E4-4925-AC8E-4BDA04917051_1_201_a.jpeg
 
Did you remove the tip of that host and press fit the replacement end on it?
 
Unown (WILD) said:
Did you remove the tip of that host and press fit the replacement end on it?
Click to expand...
yes I discarded the entire led and driver portion and bored out the rear to fit snug over the threads of the battery tube. Inside is a custom contact board wired . All is secured by a set screw , this is a great small pen for some single mode diodes. Believe it took a lot of time to machine this small heat sink and recess the contact board.
Rich:)
 
FOR SALE.. 80.00 + 9.60 Priority shipping
Here is a 1X26650/2X26350 S11 host , deep fin copper heat sink and a see thru focus adapter . It comes prewired with 22 AWG silicon wire. A great stubby host and weighs in with the copper sink and adapter.
Rich:)
2D25CF42-598C-46AD-A3DF-4E16C2712D12.jpeg1C07163F-059E-4CD4-99D7-2D057091C33C.jpegEEF201ED-1699-4B9E-9850-D87EAED256B8.jpeg
 
Hello! im Looking for a custom pen host that can fit a 8mm (diameter) laser module, do you have one?
 
Sowee7 said:
Hello! im Looking for a custom pen host that can fit a 8mm (diameter) laser module, do you have one?
Click to expand...
No I do not , what size battery will you be using? I can machine you a host like the one I just did on page 2,227 that one holds 2x10440 or 2x1.3v
 
Last edited:
Lifetime17 said:
No I do not , what size battery will you be using? I can machine you a host like the one I just did on page 2,227 that one holds 2x10440 or 2x1.3v
Click to expand...
yes please, that would be good, if possible, can you also make another pen host that fits a 12mm module (using one CR123 battery)
 
Lifetime17 said:
So this one and another host to hold 1- CR123 batterie. the CR123 would have to be custom machined or if I can find one for a flashlight modded host. May I can mod one of these host to hold 1-CR123 ..
Rich:)
777DE66B-760A-4266-AA02-400AC5484092_1_201_a.jpeg

777DE66B-760A-4266-AA02-400AC5484092_1_201_a.jpeg

IMG_3146.JPG

IMG_3146.JPG


IMG_2643.JPG

IMG_2643.JPG


fullsizeoutput_b08.jpeg

fullsizeoutput_b08.jpeg

Click to expand...
can they both be custom if possible?
 
Lifetime17 said:
Hi sure so 2- machined customs for 1xcr123 batteries what size module to fit the heat sink
For both hosts
Click to expand...
one of them would use a module sized 12mm (diameter) and 56mm (length), also can you make this host similar to this https://ibb.co/XxSk359 if thats fine? can the other one fit a 8mm (diameter) and 35mm (length) module? thanks
 
Hi,
Are both customs? And are the two battery sizes 1x Cr123'S ? And one with a 12mm module and the other at 8mm heat sink??
 
You must log in or register to reply here.


Back
Top