Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Sale thread/ Hosts/Heat Sinks/Focus adapters/lasers

Hi,
Hey i try to give the customer a good deal and i stand behind them. Yes a lot of time goes into a build some folks don't realize this if i make a mistake thats time and material lost and that can be frustrating at times. So i learned the hard way and take the extra time to machine in more reliefs and grooved plus i include a focus adapter that others would charge for .
Thank you for the encouraging words buddy glad you like it . I just machined a sink and focus adapter for a buildit is a C8 style host but on a much larger scale its huge. The heat sink is 2 in. in diameter , thinking a NUBM44 /G2 lens. i also have some battery tubes extensions that almost fit the threads so it can take 3X18650's. I just need to machine a few Delrin spacers to fill in the space for a clean look. This will have 22 AWG silicone wire to

Rich:)
 





Hi, Just started to do some powder coating sinks and focus adapters. Hoping they come out good so far its going well. This is going to be for a NUBM44 build in an oversized C8. Powder coating is very durable that paint and safer than anodizing. I will update the findings keeping my fingers crossed.

Rich:)
 

Attachments

  • fullsizeoutput_6e8.jpeg
    fullsizeoutput_6e8.jpeg
    85.8 KB · Views: 33
Ohhh fancy! My uncle powder coats riffle barrels and vehicle exhaust parts; it is very durable indeed. Me thinks it will look very nice on lasers too.
:pop:
 
Hi Bacon,
Just finished a trail run on this sink and knob i need to get use to getting the AL really clean so it won't leave imperfections . I buffed them out and i can polish the coating to.

Rich:)
 

Attachments

  • fullsizeoutput_6ea.jpeg
    fullsizeoutput_6ea.jpeg
    147 KB · Views: 32
  • fullsizeoutput_6e9.jpeg
    fullsizeoutput_6e9.jpeg
    174.2 KB · Views: 30
Too cool Rich! This should make for so many more options and styles. Great idea. :gj:
 
Nice, Rich!! I take it it’s getting a little warmer weather. Is this HF paint? That stuff is decent paint. Try some Eastwood. They make great powders. Descently priced and really nice colors. Their apple translucent would look great for green builds:pop:
 
Hi BM, Thanks some thing different now heat sinks can come in different flavors.

@SGD,
It is not paint it is powder coating it's hard and durable , won't run like paint and you get an even base . I have Red, Green and Blue and Black.
Thanks guys
Rich:)
 
Lifetime17 said:
@SGD,
It is not paint it is powder coating it's hard and durable , won't run like paint and you get an even base . I have Red, Green and Blue and Black.
Thanks guys
Rich:)
Click to expand...

Right, it’s not a typical paint. Its thermocure polymer. Some are epoxy, polyester, blends. Different colors and their effects can lay and apply differently. Practice with the psi settings. What’s cool is if it’s heavy on one side or uneven...dust it off and go again. Just be sure to shake the powder before use. Catalyst can settle away especially when it dances through the mail. Like paint though be sure there’s a little mechanical surface on those turned surfaces to adhere to :beer:

I can’t wait to see more of these Rich!!

SGD
 
Hi SGD,

Thanks for the info of about the powder settling, I use a high voltage to avoid the Faraday Cage effect on the sharp corners. This way there are no issues getting the powder to adhere to those spots. Cool ..

Rich:)
 
Hi, here is a oversize C8 NUBM44 this build is huge Aluminum Sink and focus adapter powder coated with a durable finish. It takes 2X18650's/G2/SXD set to 4.5A and the driver is sinked with a piece of copper and that is sinked to the bottom of the main sink. The diode has a copper back half ,The heat sink has considerable mass .
250.00 +7.20 2nd day priority mail .
Thanks for looking :sold::thanks:

Rich:)
 

Attachments

  • IMG_3834.JPG
    IMG_3834.JPG
    187.3 KB · Views: 22
  • IMG_3835.JPG
    IMG_3835.JPG
    189.1 KB · Views: 18
  • IMG_3827.JPG
    IMG_3827.JPG
    194.6 KB · Views: 19
  • IMG_3828.JPG
    IMG_3828.JPG
    167.8 KB · Views: 22
  • fullsizeoutput_6ed.jpeg
    fullsizeoutput_6ed.jpeg
    125.7 KB · Views: 23
Last edited:
Hi, :bumpit::wave:
I deleted the original post on this 501B , this is a revised post . Came 501B/M140/ X Drive / G2 , And a Sanwu 3X adapter powder coated gloss black.
$125.00 +7.20 2nd day priority mail. BE not included shown for exhibit only. Custom focus knob also included.
Thank You
Rich:)
 

Attachments

  • IMG_3830.JPG
    IMG_3830.JPG
    190.8 KB · Views: 27
  • IMG_3831.JPG
    IMG_3831.JPG
    191.2 KB · Views: 27
  • IMG_3833.JPG
    IMG_3833.JPG
    188.1 KB · Views: 27
  • IMG_3829.JPG
    IMG_3829.JPG
    246.8 KB · Views: 27
Last edited:
Always enjoy looking at your builds Rich. So much eye candy. :drool:

Best wishes with your sales, hope they find good homes.
 
Last edited:
Hi BM, Thank You buddy hey i try all kinds of upgrades instead of the same old . I also have agree and Red for the other WL'S.

Rich:)
 
Hi E,
Thank pal a long journey my man, hats off to you for the reps . awesome..

Rich:)
 
  • Like
Reactions: GSS
Lifetime17 said:
Hi,
I deleted the original post on this 501B , this is a revised post . Came 501B/M140/ X Drive / G2 , And a Sanwu 3X adapter powder coated gloss black.
$125.00 +7.20 2nd day priority mail. BE not included shown for exhibit only. Custom focus knob also included.
Thank You
Rich:)
Click to expand...

Hello old friend!

I really like that 501b, it looks like one I have seen from you before with the camo. Now you are adding the BE? PM me about it.
 
You must log in or register to reply here.





Back
Top