Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

ROUND II: Daguin inventory reduction sale!

Status
Not open for further replies.
jaws2002 said:
I just got my scientec meter today. This thing is easy to use, and sensitive too. I measured cheapie 2mw reds all the way up to a 1.8w blue laser. It responds fast enough that I now know my batteries are just not up to the task of keeping the high powered lasers going at full output. Thanks Dave, this meter is awesome.
Click to expand...

Sweet!
They are also sensitive enough to actually read the change in output (in real time) as the diode and driver heat up.

Remember, when measuring high powered lasers, you need to defocus them a bit.
The calorimeter surface is very tough, but with the laser focused at the distance of the surface, the acceptable energy per square centimeter can be exceeded.

wannaburnstuff said:
Got my Scientech Meter today as well Very professional looking, was packed INSANELY well!!! Definitely makes me feel like I am that much closer to having a personal laboratory!!!
Click to expand...

Enjoy! Scientech meters are indeed used in professional laboratories all over the world

Welcome to a new level in the hobby

Peace,
dave
 
Last edited:





Just a bump Jedi Master ;)

:bumpit:

~ LB

daguin said:
UPDATED 5/20/13
:drool:

OK folks. I've got too much piled up around here again
As usual, the earlier PM takes precedence

This is an ongoing list of the stuff I find while I'm cleaning out my office/workshop


Here are eight seven six five MrCrouse, "Laser Saber" host lasers
These Laser Saber hosts have a massive heat sink and are powered by two 18650 batteries
This gives these hosts a long run time and duty cycle :D
They come with the AixiZ glass lens
If you get a high output lens (g-1, g-2, etc.) from Jayrob or DTR,you can increase the reported output by over 15%

Four Three TWO ONE has the 9mm diode
Four have the M-145 diode

LAST ONE OF THE 9MM LASERS
The 9mm diode laser comes with a copper module and has a 2.2A driver
It is putting out 2.2W+ with the AixiZ lens
It comes with one set of batteries
The 9mm laser is offered at $250, shipped in the US

The M-145 diode lasers come with a stock AixiZ module and have a 1.8A driver
They are putting out 1.6W+ with the AixiZ lens
The M-145 lasers are offered at $175, shipped in the US

All come with one set of batteries and a "holster"




9mm diode lasers: A, B, C, D ($250 each, shipped)
M-145 diode lasers: A, B, C, D ($175 each, shipped)

I have one C3 Stainless host laser with a FlamingPyro focus ring
It has an M-145 diode and a BenBoost driver set at 1.25A
With the AixiZ glass lens it is putting out 1.1W
Since the host only takes a single 14500 battery I have upgraded the battery to an IMR battery to deal with the high current draw
It is offered here for $110, shipped in the US






ARGON LASERS


First up is a 25mW single line (488nm) argon laser
It has an internal rheostat for light control
It needs a plug and the fan installed
It is $125, plus shipping


Second is a 38mW single line (488nm) argon laser
It has an internal rheostat for light control
It needs a plug installed
It is offered at $150, plus shipping


Next is a "plug-n-play" 145mW Multi-Line argon laser
I have included an external rheostat to give the laser current control
It is showing all of the normal six color lines
It is offered here for $450, plus shipping


Finally, I have a Cylinder style Multi-Line argon laser
This will require you to either build or buy a remote (I can link you to a schematic) and make a fan setup
I will jumper the PSU to have it run in "idle" so you can see it work
However, for full power, you will need the remote
**IF** you can use 220V for the PSU and fan, I will include a stock squirrel cage fan for just the cost of shipping
It is putting out 105mW at full power and is offered at $350, plus shipping



Labby's . . . . :D

The first one up is a 300mW 635nm laser
It has a C-Mount diode with the square output
It has an 85-240VAC to 5VDC converter
You could power it directly with 5V if you want
It has analog modulation
It is $300, plus shipping
IMG_1896_zps10fb604d.jpg

IMG_1895_zps9efd1220.jpg


Second, is a >400mW 532nm laser
It is powered by 110V
It has TTL modulation
It is $300, plus shipping
IMG_1890_zps138e041c.jpg

IMG_1889_zps5ca00e3f.jpg


Finally, I have a 1W 655nm laser
It is powered by 5V
It has analog modulation
It is $250, plus shipping
IMG_1888_zps7a99948a.jpg

IMG_1887_zpsca65e064.jpg




I have one red HeNe with PSU left. It is doing 1-3mW. It has a lab-style PSU. The PSU is powered by 110V mains.
It is offered at $50 $40 PLUS SHIPPING
b20f5684-2399-4f7d-8314-b78137bbc8dc_zpsdb84d023.jpg


I have one bare tube green HeNe with mains powered PSU
The PSU will take either 110V or 220V mains
It is offered here for $100, plus shipping








Peace,
dave
Click to expand...
 
daguin said:
LOL! The only reason I sell anything is to buy more laser stuff :whistle:

Peace,
dave

**EDIT** -- The last LPM is sold
Click to expand...

lol same here i just listed a bunch of crap i had in my room on amazon,

i alos carry a steady supply of 5mw pen lasers to sell to random strangers who want my laser, "buy pen lasers in bulk" make $10-15 profit each, use money to buy good lasers from builders here, profit!!??
 
firelaser said:
lol same here i just listed a bunch of crap i had in my room on amazon,

i alos carry a steady supply of 5mw pen lasers to sell to random strangers who want my laser, "buy pen lasers in bulk" make $10-15 profit each, use money to buy good lasers from builders here, profit!!??
Click to expand...

And now we know where all the laser attacks on air crafts are coming from :crackup:

But seriously, i hope you heavily explain the dangers and safety precautions they need to take when using a laser. its hard to recommend glasses when your out and about the town but still something they'd need
 
Livinloud said:
And now we know where all the laser attacks on air crafts are coming from :crackup:

But seriously, i hope you heavily explain the dangers and safety precautions they need to take when using a laser. its hard to recommend glasses when your out and about the town but still something they'd need
Click to expand...

i generally never sell to someone i feel is unsafe, i explain greatly that is IS A FELONY THAT CAN LAND YOU YEARS IN JAIL TO POINT AT AIRCRAFT IN VEHICLES to them and usually show them a video on how easy it is for them to find out who you are and they will catch you and explain eye safety,, also i dont sell burners much but when i did i sold goggles too

there is no attacks on aircraft in my city recently so its good so far
 
firelaser said:
i generally never sell to someone i feel is unsafe, i explain greatly that is IS A FELONY THAT CAN LAND YOU YEARS IN JAIL TO POINT AT AIRCRAFT IN VEHICLES to them and usually show them a video on how easy it is for them to find out who you are and they will catch you and explain eye safety,, also i dont sell burners much but when i did i sold goggles too

there is no attacks on aircraft in my city recently so its good so far
Click to expand...

Can you give me the link to that video please? I would like to show it the people i sell 1mW lasers to. Thanks :)
 
cheech226 said:
Thank YOU Dave! This is a Steal! The ps alone is worth about double.
Click to expand...

I know ;)

I offered most of the stuff as a service to the community

Unfortunately, some people want to get a discount no matter how much below the "normal" price something is :yabbmad:

It's on its way to you :D

Peace,
dave
 
daguin said:
I know ;)

I offered most of the stuff as a service to the community

Unfortunately, some people want to get a discount no matter how much below the "normal" price something is :yabbmad:

It's on its way to you :D

Peace,
dave
Click to expand...

lol they want your stuff cheeper? your laser prices are some of the best around for what you get.
 
Status
Not open for further replies.


Back
Top