Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

PHR-805 405nm diodes, replace PHR-803t's

clif

clif

0
Joined
Oct 9, 2010
Messages
268
Points
0

Has anyone yet tried out the new 405nm diodes that are the replacements for the PHR-803t's? If not - I have. These litte buggers are nice, they come NOT in any heat sink, ready to press fit into an aixiz module. Greg at stonetek.org was kind enough to donate a few of these new diodes to me, and I tested two of them to the death!
Here are my results from the first two diodes I tested, each diode was press fitted into and Aixiz module, and thermal grease was applied and then I inserted the module into one of Greg's Blu-M heat sinks. The results are from the using an Aixiz Glass lens first and then diodes raw output... I'm impressed with them - and thank you so much Greg for the extra freebie diodes for me to use and abuse at will!!! I would personally feel quite comfortable running these at 130-140mA as my heat sink didn't get warm until 150mA on up, and the diodes were ran for several minutes a piece. 130-140 gives you a bit more than the 120mA most people like to set their 803t's at. This is just my opinion, I have not done extensive testing on the longevity of this diode at that power level. If they LED at 200mA, 70% of that is 140mA, which could be a good RMS power setting for these - but as we all know only time will tell. I think these diodes have a good potential, and will be more popular even the 803's simply b/c it comes ready to install in the aixiz module, the diode's pins are nice and straight and LONG so they're a breeze to work with, even for me! :yh:

Be sure to pick up a few from Greg, he has a bunch on hand at the moment...
PHR-805 HD diode OEM 405nm !!! HIGH POWER !! [PHR805] - $16.99 : StoneTek Electronics, Your Laser Parts Store


PHR-805t Diode #1
Current: Aixiz Glass Lens: Raw output:
30mA lasing threshold lasing threshold
40mA 2mw 6mw
50mA 13mw 22mw
60mA 24mw 37mw
70mA 35mw 52mw
80mA 52mw 68mw
90mA 60mw 82mw
100mA 71mw 101mw
110mA 82mw 112mw
120mA 88mw 125mw
130mA 105mw 136mw
140mA 113mw 148mw
150mA 128mw 162mw
160mA 140mw 183mw
170mA 136mw 194mw
180mA 154mw 207mw
190mA 158mw 223mw
200mA LED! LED!

PHR-805t Diode #2
Current: Aixiz Glass Lens: Raw output:
30mA lasing threshold lasing threshold
40mA 2mw 8mw
50mA 14mw 23mw
60mA 24mw 40mw
70mA 39mw 58mw
80mA 50mw 72mw
90mA 64mw 91mw
100mA 73mw 103mw
110mA 89mw 121mw
120mA 102mw 134mw
130mA 112mw 154mw
140mA 123mw 163mw
150mA 135mw 186mw
160mA 146mw 196mw
170mA 158mw 209mw
180mA 165mw 220mw
190mA 172mw 229mw
200mA LED! LED!
 
Last edited:





Nice write up Clif.
150mW of 405nm for that price is pretty damn good!

-Tony
 
Looks like we have a new cheap 405nm that puts out some good power.:)

Thanks for the test.
 
Yeah guys - one little tidbit I failed to mention is that the pin out on these babies is like the LPC-815's, where the case pin is the negative connection. Never seen a 405nm diode with that. When I connected my first one to test, nothing happened, so I thought, ok a DOA. (or I zapped it?) But then when the second one didn't fire off, I said wait a minute, then I got with Greg about it, and we tried out the case pin for a negative and bam it worked. The manufacturer gave him the same pinout as the 803's but this was not the case (if you'll excuse the pun!). It's not a big deal so long as you are aware of it, but something to take note of if you plan on using a microboost driver or other ground input isolated driver, since connecting a negative lead to the former negative pin now does nothing.

Maybe someone with some graph plotting skills might even make a nice little chart for us with the info obtained thus far. ;)
I tried to get my better half to do it but it keeps getting put on the back-burner...
 
Thanks anselm! Nice job.... what program did you use to make the chart? I'm terrible using excel - which is why I haven't done one... I plan on killing at least one of my one PHR-803t diodes doing the exact same test for a direct comparison on the same power meter, heat sink and driver... then we will see which one has more output at the same current, etc.
 
Ewwww, microsoft....
I use free stuff like openoffice in this case, thank you very much!
 
Silvershot said:
Can we do a group buy for these?
:)
Click to expand...

I have 90 in stock - if you wish to purchase in bulk - email me with requests.

Anselm - THANKS for doing that - I have already popped your chart up on my site (without asking YOU !) if you want me to remove it, I shall, just say the word - in EITHER case, thank you for putting it into an easy to see format :-)
 
The Pin out is like a LPC.:eek: Man thats weird. Is this the first blu-Ray with that kind of Pin out.?

SenKat_Stonetek :gj: in getting these.
 
Nice find. These are almost like the 6x blue rays. Much cheaper too. I will still use a PHR-803t for my coming build, but I will surely use this for the next for an extra 50mW over the 100 from the PHR-803t at 100ma
 
Juniortore1 said:
Nice find. These are almost like the 6x blue rays. Much cheaper too. I will still use a PHR-803t for my coming build, but I will surely use this for the next for an extra 50mW over the 100 from the PHR-803t at 100ma
Click to expand...

Yes - it is performing nicely, NOT as nicely as I had hoped - but still better than the PHR-803's....AND the 803's are history, folks....all that is left at various distributors will be old stock, and will NOT be replenished ! So - don't count on being able to buy the 803's for too much longer - my favorite distributor has run out of them, and is not going to bother looking for a new source, especially since finding these as EXCELLENT replacements ! :-)

The only BAD thing about them is, I have to order them in 200 piece segments - the 90 I have left are the result of a special order for a customer that needed 100 units, so I'm stuck with a LOT tied up in inventory now :(
 
Hey nice to see that someone else did the murder test for me. Greg was gracious enough to send some out to me as well...i was planning on doing just this. Phew, lucky me now i can keep my 805's to play with instead of murdering them...+1 to you clif. I do a nice fully built laser review of these diodes once they arrive.
 
steviedezie said:
Hey nice to see that someone else did the murder test for me. Greg was gracious enough to send some out to me as well...i was planning on doing just this. Phew, lucky me now i can keep my 805's to play with instead of murdering them...+1 to you clif. I do a nice fully built laser review of these diodes once they arrive.
Click to expand...

I was nice enough ? PHAW ! YOU were nice enough to not murder me when I completely dropped the ball on your order !:thinking:
When I DO screw up, it's pretty darn good, too ! :D
 
You must log in or register to reply here.





Back
Top