- Joined
- Jun 13, 2007
- Messages
- 5,410
- Points
- 113
All power readings are taken with a LaserBee 5W with OPHIR sensor.
Buyer MUST be 18+ and have proper certified laser eye protection.
Now accepting offers.
CNI GLP Black/Gold Pen $125: Peaks 170mW, stays around 160mW for a while after a quick warmup. Comes with two Eneloop AAA batteries. Has a few minor chips in the paint.
WL Executive Fusion $65 now $55!: Unstable, after a short warmup it was able to hold 125mW for 30 seconds but then fell to 50mW. The output on this laser is never consistent. Comes with two WL boxes.
Vid: Fusion Green Laser from Wicked Lasers! - YouTube
Er:Yag Laser $675 now $625!: Average output power around 25W with pulses in the megawatt range. TBH I don't know how the f*ck to start this thing up and don't want to kill myself trying to find out. Comes with everything stated in the auction I got it from here: Er Yag Laser | eBay
I got a Uniphase ArIon and PSU that I'd part with that I got from this thread: http://laserpointerforums.com/f39/u...laser-110v-w-controller-ready-lase-69236.html . It pulses on startup and usually takes a few restarts to get it to run right. I don't know what could cause this as I am no expert with gas lasers.
Also have some ~100mW green DX modules, a few 200mW red handhelds, some NewWish green pointers, and other cheap green handhelds. I will be adding more stuff later.
Contact me for shipping quotes.
Buyer MUST be 18+ and have proper certified laser eye protection.
Now accepting offers.
CNI GLP Black/Gold Pen $125: Peaks 170mW, stays around 160mW for a while after a quick warmup. Comes with two Eneloop AAA batteries. Has a few minor chips in the paint.
WL Executive Fusion $65 now $55!: Unstable, after a short warmup it was able to hold 125mW for 30 seconds but then fell to 50mW. The output on this laser is never consistent. Comes with two WL boxes.
Vid: Fusion Green Laser from Wicked Lasers! - YouTube
Er:Yag Laser $675 now $625!: Average output power around 25W with pulses in the megawatt range. TBH I don't know how the f*ck to start this thing up and don't want to kill myself trying to find out. Comes with everything stated in the auction I got it from here: Er Yag Laser | eBay
I got a Uniphase ArIon and PSU that I'd part with that I got from this thread: http://laserpointerforums.com/f39/u...laser-110v-w-controller-ready-lase-69236.html . It pulses on startup and usually takes a few restarts to get it to run right. I don't know what could cause this as I am no expert with gas lasers.
Also have some ~100mW green DX modules, a few 200mW red handhelds, some NewWish green pointers, and other cheap green handhelds. I will be adding more stuff later.
Contact me for shipping quotes.
Last edited: