new to scanners

[andy_con]

the scanner take power from the psu provided with them.

the laser is powered from the psu provided with it.

the ilda connector links the laser and scanners together via the computer. the computer/software will control the on and off of the laser and control the scanners.

 

[thesk8nmidget]

yeah i want a key switch to turn it on a big switch like a breaker nice and big and one like that.so when they are shorted it turns off.

its works the other way around.


when the wires on 4,17 are shorted the lasers turn on when you break that connection they are on

 

[jamilm9]

when the wires on 4,17 are shorted the lasers turn on when you break that connection they are [highlight]on[/highlight]

do you mean off

the scanner take power from the psu provided with them.

i was asking how many volot/amp to give to the psu

 

[andy_con]

it makes no odds.

99% of the psu run on mains, so either 110v or 240v

 

[jamilm9]

are sp20's on 110volt

 

[jamilm9]

and would this be right

 

[andy_con]

are sp20's on 110volt

no idea you will need to see what it says on the psu.

 

[jamilm9]

anyone know

 

[andy_con]

what does it say on the psu?

 

[jamilm9]

i don't know i can't find a clear picture.

 

[MarioMaster]

the scanpros use a universal switchmode power supply (90-250vac) you just have to supply a power cord

 

[jamilm9]

sweet.Thanks and how do i have it so i can change from ilda to dmx easily.

 

[thesk8nmidget]

when the wires on 4,17 are shorted the lasers turn on when you break that connection they are [highlight]on[/highlight]

do you mean off

the scanner take power from the psu provided with them.

i was asking how many volot/amp to give to the psu

no i mean off.

my dac has a jumper wire on those pins

 

[MarioMaster]

sweet.Thanks and how do i have it so i can change from ilda to dmx easily.

as far as i'm aware the DMX board has some kind of autodetect function that switches from DMX to ILDA when a signal is present (you'll have to ask maybe someone at lasershowparts about this)

 

[thesk8nmidget]

just got my big shipment from laser wave so i have a set of scanpro20s in hand and they do say

input AC 90-264v


so 110 and 220 will work

 

[andy_con]

i received a big shipment from laserwave recently.

2x 250mw 473nm modules
2x 800mw 650nm modules
1x 1watt 532nm module

10x 3 aixiz mirror mounts
2x dichros
10x front surfaced mirrors

then seperatly soem cambridge scanners