Laser Barrels V2. GB. Second run. Kryton Groove

[toked323]

Re: Laser Barrels V2. GB. Second run.

ive almost got enough money only 10$ more, put me down for one

 

[Hemlock_Mike]

Re: Laser Barrels V2. GB. Second run.

AMK --

I think that's Kenom's writing there.  Notice that most of it is crossed out  ;D

A budding Einstein have we here

Joking aside -- Send me a drawing for the 3 cut you want. I'll resharpen the bit for a flatter cut. Also consider my picture.

Mike

 

[Kenom]

Re: Laser Barrels V2. GB. Second run.

I've considered the option of increasing the length of the head a short bit to allow for an additional fin but to be honest there really isn't a benefit that I see. The fins are a bit too skinny so yes we make them a bit bigger. we also make them a little further apart from one another. so far what I'm thinking is starting from the threads go up 1.5mm make a cut 1.5mm thick and 2mm deep. then move 1.5mm space and again 1.5mm thick cut but only 1mm deep then repeat 1.5mm space, 1.5mm cut 1mm deep

 

[Hemlock_Mike]

Re: Laser Barrels V2. GB. Second run.

Kenom -- Just a thought.  Making the head deeper puts the plastic lens deeper into the head and a little harder to focus with your pinkie like I do now.  A few thou is no problem.

Mike

Is your barrel up to this for a 6x ??  

 

[amkdeath]

Re: Laser Barrels V2. GB. Second run.

Kenom -- Just a thought. Making the head deeper puts the plastic lens deeper into the head and a little harder to focus with your pinkie like I do now. A few thou is no problem.

Mike

yea, unless you have those insanely long aixiz glass lenses, it is hard to focus the thing. its so deep in there. however, if we make it not as deep, then the cover will not be possible...

 

[Kenom]

Re: Laser Barrels V2. GB. Second run.

right which is why I didn't really want to add any more lenth to the head itself. I want it nice and small. but when we go to the c-mount barrels, I will make those bigger and deeper.

 

[Kenom]

Re: Laser Barrels V2. GB. Second run.

although there is alternatively the other option of making a focus tool. I will show you the one I use. it allows for focusing while still allowing the beam to shoot through it and you can still see the affects of your focusing on the beam.

 

[Hemlock_Mike]

Re: Laser Barrels V2. GB. Second run.

When you go Cmount -- The power will be apparent and need the cooling. The added size will be needed.

Mike

 

[Hemlock_Mike]

Re: Laser Barrels V2. GB. Second run.

Kenom -- Doing the math on your 1.5 - 1.5 - 1.5 .......... idea adds up to 12 mm for me. I'm reading 11.1 mm available space. Maybe we aren't communicating on the dimensions
Make a drawing --- mm or " !!!!

Mike

 

[Kenom]

Re: Laser Barrels V2. GB. Second run.

LOL. sorry miscommunication on my part. In the initial post I indicated you were going to do 3 fins instead of 2. I did NOT however indicate that on the second post where I gave the dimensions of 1.5mm x 1.5mm . 3 cuts = 9mm. (plenty of room)

 

[Hemlock_Mike]

Re: Laser Barrels V2. GB. Second run.

Kenom --

I have refigured your dimensions.   I'm OK with that..  Will make chips soon for the final prototype.

Mike

 

[Kenom]

Re: Laser Barrels V2. GB. Second run.

now if we can just find someone with a milling machine to do the grooves.

 

[amkdeath]

Re: Laser Barrels V2. GB. Second run.

146mW of blu??


I know Im not up to that ;D ;D Lets just hope I dont killify the ps3 diode...

 

[robjdixon]

Re: Laser Barrels V2. GB. Second run.

i have looked through the whole topic and can't find information on how to get a lavadrive. How can i order that as well??

 

[Kenom]

Re: Laser Barrels V2. GB. Second run.

I still havn't added that to google checkout. I'm workin on it. I'll have it soon. still havn't got someone to help me fix the google button code to add the option.

 

[toked323]

Re: Laser Barrels V2. GB. Second run.

I still havn't added that to google checkout. I'm workin on it. I'll have it soon. still havn't got someone to help me fix the google button code to add the option.

if you need help pm me ill see what i can do