Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers
Buy Site Supporter Role (remove some ads) | LPF Donations
Links below open in new window
FrozenGate by Avery
Laser Barrels V2. GB. Second run. Kryton Groove
- Thread starter Kenom
- Start date
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
Re: Laser Barrels V2. GB. Second run. Kryton Groov
There is enough room in there to use many different configurations of driver. So yes, Fusion drives will fit inside either the Kryton or the Groove.
Peace,
dave
Cxrazy said:
There is enough room in there to use many different configurations of driver. So yes, Fusion drives will fit inside either the Kryton or the Groove.
Peace,
dave
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,628
- Points
- 63
Re: Laser Barrels V2. GB. Second run. Kryton Groov
Even a homemade lm317 driver works in this. tight fit but I've seen it done.
Even a homemade lm317 driver works in this. tight fit but I've seen it done.
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,628
- Points
- 63
Re: Laser Barrels V2. GB. Second run. Kryton Groov
ordering up the components for the groove drives. and we are increasing the current range on the red up to 500ma.
ordering up the components for the groove drives. and we are increasing the current range on the red up to 500ma.
- Joined
- Feb 23, 2008
- Messages
- 2,832
- Points
- 48
Re: Laser Barrels V2. GB. Second run. Kryton Groov
that means ill be able to put 1 of my open cans in ther...NICE! ;D
that means ill be able to put 1 of my open cans in ther...NICE! ;D
- Joined
- Nov 19, 2007
- Messages
- 488
- Points
- 0
Re: Laser Barrels V2. GB. Second run. Kryton Groov
What current do you think I should run my open can at?
What current do you think I should run my open can at?
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
Re: Laser Barrels V2. GB. Second run. Kryton Groov
I'll chime in on that one...
420mA's seems to be the 'sweet spot' and will give you around 247mW's with an AixiZ acrylic lens.
I have my Kryton barrel/Lava driver set at 450mA's and an open can putting out 264mW's (same lens)
I've built a few at 470mA's too. This is pushing the open can diode pretty hard. Some may think it's worth the extra power since the diodes are only about $25 bucks.
Jay
happytomato said:
I'll chime in on that one...
420mA's seems to be the 'sweet spot' and will give you around 247mW's with an AixiZ acrylic lens.
I have my Kryton barrel/Lava driver set at 450mA's and an open can putting out 264mW's (same lens)
I've built a few at 470mA's too. This is pushing the open can diode pretty hard. Some may think it's worth the extra power since the diodes are only about $25 bucks.
Jay
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,628
- Points
- 63
Re: Laser Barrels V2. GB. Second run. Kryton Groov
Yeah I'd agree with jayrob. You can get more if you really really want but you WILL sacrifice lifespan on the laser diode. for example, D3stroy has a mxdl with an open can that he's pushing at 500ma. He's getting 350mW!!!! I'm sure that it's going to die very quickly.
Yeah I'd agree with jayrob. You can get more if you really really want but you WILL sacrifice lifespan on the laser diode. for example, D3stroy has a mxdl with an open can that he's pushing at 500ma. He's getting 350mW!!!! I'm sure that it's going to die very quickly.
- Joined
- Feb 29, 2008
- Messages
- 2,344
- Points
- 0
Re: Laser Barrels V2. GB. Second run. Kryton Groov
will we get assembly instructions with it?
Like how to ground the diode to the case
Or is that simple?
will we get assembly instructions with it?
Like how to ground the diode to the case
Or is that simple?
- Joined
- Nov 19, 2007
- Messages
- 488
- Points
- 0
Re: Laser Barrels V2. GB. Second run. Kryton Groov
I'll chime in on that one...
420mA's seems to be the 'sweet spot' and will give you around 247mW's with an AixiZ acrylic lens.
I have my Kryton/Lava barrel set at 450mA's and an open can putting out 264mW's (same lens)
I've built a few at 470mA's too. This is pushing the open can diode pretty hard. Some may think it's worth the extra power since the diodes are only about $25 bucks.
Jay
[/quote]
I think I'll set mine to 450mA, and use a glass lens. That should bring me close to 300mW. Thanks for the info.
jayrob said:
I'll chime in on that one...
420mA's seems to be the 'sweet spot' and will give you around 247mW's with an AixiZ acrylic lens.
I have my Kryton/Lava barrel set at 450mA's and an open can putting out 264mW's (same lens)
I've built a few at 470mA's too. This is pushing the open can diode pretty hard. Some may think it's worth the extra power since the diodes are only about $25 bucks.
Jay
[/quote]
I think I'll set mine to 450mA, and use a glass lens. That should bring me close to 300mW. Thanks for the info.
- Joined
- Nov 19, 2007
- Messages
- 488
- Points
- 0
Re: Laser Barrels V2. GB. Second run. Kryton Groov
It is as simple as slotting the diode in the housing if i'm not mistaken.
robjdixon said:
It is as simple as slotting the diode in the housing if i'm not mistaken.
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,628
- Points
- 63
Re: Laser Barrels V2. GB. Second run. Kryton Groov
Now this depends on the diode. If your using an open can all you have to do is press fit the diode solder on the neg. and pos. and connect the pos. to the pos on the batteries and your golden!! If it's a 803t HD diode then just solder a bridge between the neg and the casing and your golden. IT really is very simple.
Now this depends on the diode. If your using an open can all you have to do is press fit the diode solder on the neg. and pos. and connect the pos. to the pos on the batteries and your golden!! If it's a 803t HD diode then just solder a bridge between the neg and the casing and your golden. IT really is very simple.
- Joined
- Nov 19, 2007
- Messages
- 488
- Points
- 0
Re: Laser Barrels V2. GB. Second run. Kryton Groov
or just bend the pin to touch the casing. Right?
or just bend the pin to touch the casing. Right?
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,628
- Points
- 63
Re: Laser Barrels V2. GB. Second run. Kryton Groov
that works too.
that works too.
rkcstr
0
- Joined
- Dec 1, 2007
- Messages
- 1,368
- Points
- 0
Re: Laser Barrels V2. GB. Second run. Kryton Groov
Just ordered one with a Lavadrive2... hoping to make me a stunning 803T build to impress the ladies
Just wondering what order I made it on? When to expect them to be built and shipped? I tried reading through the past 10 pages, and couldn't really figure it out.
Just ordered one with a Lavadrive2... hoping to make me a stunning 803T build to impress the ladies
Just wondering what order I made it on? When to expect them to be built and shipped? I tried reading through the past 10 pages, and couldn't really figure it out.
