Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

GB: Brand New Empty NewWish Pen Hosts. "THis is Now a Group Buy"

Re: GB: Brand New Empty NewWish Pen Hosts. "Feeler..."

^^ You got It.

28 Left
 





Re: GB: Brand New Empty NewWish Pen Hosts. "Feeler..."

^^^ Thanks you got it buddy.:)


18 Left
 
Last edited:
Re: GB: Brand New Empty NewWish Pen Hosts. "Feeler..."

I would like to buy 10 please.

What is the inside diameter of the hosts? My hope is to use it with a 12mm module (similar to aixiz).

Thanks
 
Last edited:
Re: GB: Brand New Empty NewWish Pen Hosts. "Feeler..."

^^^ You got it buddy.:)

My supplier tells me a Green module that is 12x60 is meant for this Host.

But obviously we will use these for other Builds as well.;)


8 Left
 
Re: GB: Brand New Empty NewWish Pen Hosts. "Feeler..."

laser_freak said:
I would like to buy 10 please.

What is the inside diameter of the hosts? My hope is to use it with a 12mm module (similar to aixiz).

Thanks
Click to expand...

Aixiz module generally slide right into these hosts.

There is enough room for the top half of an aixiz module, a rkcstr driver (or jib77 maybe?), a blank pcb with a switch (for the side button) and 2x 10440 batteries.

Can 2x10440 batteries power the jib driver and a 445nm diode? You could have >1W pens.....
 
Last edited:
Are these coming from china? what would be the estimated arrival time after payment is made?

Also, can you change mine from 17 to 10. I don't really have a use for them so i'll play it safe with 10.
 
Last edited:
Yes they are coming from China. 2-3Weeks.:)

Yes i can change it.

SO there is

9 Left Guys.
 
It is no Problem Buddy.;)

These will make Great builds. With the host being in good condition. I could never get a NewWish one apart with out 1 ding or scuff on it.
 
Last edited:
Well if you guys ever want to take apart a newish with a green, you could follow the "Hemlock Mike's Method" we sometimes call it. You drill a hole into a block of wood one size smaller than the size of the head of the host. Then you cut the block in half using a chop saw or whatever you have. Then you use a vice with the two blocks to get a nice and even cylindrical grip around the head. Then wiggle and pull the body from the head. Works perfect, no marks, no scuffs... I've disassembled and re-assembled fine with no problems at all. Lets people have a cheap green module and a host if you really want it.
 
You must log in or register to reply here.





Back
Top