Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

FS: Kryton Groovy Green Kit! While they last...

Re: FS: Kryton Groovy Green Kit! While they last..

daguin,

Hey Dave, I am shipping back your center section of your Kryton Groove barrel with heatsink and o-ring today! (Thursday)

Please post back with your comments on the build! :)
Jay
 





Re: FS: Kryton Groovy Green Kit! While they last..

jayrob said:
daguin,
Hey Dave, I am shipping back your center section of your Kryton Groove barrel with heatsink and o-ring today! (Thursday)
Please post back with your comments on the build! :)
Jay
Click to expand...

Excellent! Susie just got back so the module should be on the way soon. Plus, next week is the last week of Winter session. I'll be able to get back to my grueling two days a week schedule then. No one should have to work four days a week!

My pocket mini kits are just sitting in the drawer, taunting me.

I need more play time ;)

Peace,
dave
 
Re: FS: Kryton Groovy Green Kit! While they last..

Must be nice Dave...

Sounds like after next week, you will have your play time! :)

I am looking forward to you comments in my Pocket Mini kit thread for those builds. I think you will like them very much! Even though you have assembled many different builds...
Jay
 
Re: FS: Kryton Groovy Green Kit! While they last..

jayrob said:
Must be nice Dave...
Sounds like after next week, you will have your play time! :)
I am looking forward to you comments in my Pocket Mini kit thread for those builds. I think you will like them very much! Even though you have assembled many different builds...
Jay
Click to expand...

It's my payoff for neither killing one of my professors nor committing suicide during graduate school ;)

Peace,
dave
 
Re: FS: Kryton Groovy Green Kit! While they last..

bmw328aw, your barrel, with heatsink and o-ring will be back on it's way to you today! (Monday)
Jay
 
Re: FS: Kryton Groovy Green Kit! While they last..

Just received them! Thanks!

I must say quality work here, everything worked perfectly as expected! I haven't gotten my module i ordered from Susie yet, but i tried one of my low powered green modules from a leadlight i had and i must say it works perfectly! Quality build and Jay is an excellent person to order from, very gracious and accommodating. I received my barrel within less than a week from when i sent it out, had i sent it to him on a Monday I would have probably gotten it back on the same week!

Thanks a lot!
 
Re: FS: Kryton Groovy Green Kit! While they last..

Thanks for posting back...

Glad you like the modification! :)
Jay
 
Re: FS: Kryton Groovy Green Kit! While they last..

Does it come with a 1.5mm allen wrench?

If not can you inculde one for a little extra  8-)

Does 79 us inculde shipping and handling?
 
Re: FS: Kryton Groovy Green Kit! While they last..

$79 plus $6 dollars for shipping and handling will get you everything you see in the first picture in the thread.

Then you would need a module, a battery, and a 1.5mm Allen wrench for the set screw. The Allen wrench can be found at any local hardware store for less than $2 dollars.

Shipping out of the U.S. will be the same price. But there will be no signature confirmation. (Buyer assumes responsibility at that price) Should not be a problem though...
Jay
 
Re: FS: Kryton Groovy Green Kit! While they last..

jayrob said:
Then you would need a module...
Click to expand...

Btw Jay, are you implying (in your op) that 150mW is about the operating limit for this host, or were those module hyperlinks only examples? If the latter, what would be the limit, iyho?

I know that the Kryton's make for a pretty good heatsink but it's still not a full-fleged "handheld" with fins, etc.

Thx
 
Re: FS: Kryton Groovy Green Kit! While they last..

I just don't know of a source that has any modules of this same size that are more than 150mW's...

O-like has higher quality IR filtered modules but they are a lot larger in size.
Jay
 
Re: FS: Kryton Groovy Green Kit! While they last..

jayrob said:
I just don't know of a source that has any modules of this same size that are more than 150mW's...
Click to expand...
Gotcha. I just had a quick look around, didn't find much either. It's not that I want to build a mega-laser out of the kit but I already have a very nice 50mW greenie so I do want to to diversify... but 150mW should make for a difference, lol  :P

On a side note, what's your opinion on IR-filterless greenies? My current 50mW greenie comes with a filter & I might add one to the kryton - if there is space for one...
 
Re: FS: Kryton Groovy Green Kit! While they last..

Not to suck up to bad Jayman but I hold my lasers,the important lasers, in the same velvet type wallet box as the one in the photo. ;D .
 
Re: FS: Kryton Groovy Green Kit! While they last..

Yep... for those ones that you reach for more often than the others... :)






Traveller, I'm no expert on IR, but I measured less than a 10mW difference with an IR filter. So I figure it's no big deal. (IMO) It's not like I am looking toward the beam, and can get the IR going into my eyes...

If you want to put an IR filter in there, the Kryton is a good host for that. Right at the bottom of the Kryton head, where you would normally mount your red or blu-ray diode, is a perfect spot to glue an IR filter. I have some nice thin filters from Nova. They were about $10 bucks a piece...
Jay
 
Re: FS: Kryton Groovy Green Kit! While they last..

Traveller, I am shipping your Kryton Groove Barrel and Kit today. (with IR filter)

Hope it gets to you soon... Let me know! :)
Jay
 
Re: FS: Kryton Groovy Green Kit! While they last..

jayrob said:
I am shipping your Kryton Groove Barrel and Kit today...
Click to expand...

Hubba-hubba  :D

Plz let me us know if the tracking option works...  :-/
 
You must log in or register to reply here.


Back
Top